DIYMAG Round Rubber-Coated Magnets, 6-Pack with 1/4-Inch Threaded Studs

For mounting a camera, light, display panel, or other hardware on a steel surface, these DIYMAG magnets provide a threaded attachment point without requiring a permanent fastener in the mounting surface. Each round base has a black rubber coating, and the six-pack gives you multiple magnetic mounting points for a project or setup.

Choose this style when you need a removable magnetic base with a stud, a conventional screw mount makes more sense when the mounting surface itself needs to be drilled and fastened.

Practical tips

The 1/4-inch male threaded stud can screw into a compatible threaded hole or pass through a hole and be secured with a washer and nut. That gives you two straightforward ways to attach supported hardware. For magnetic mounting, place the flat base against a steel surface. The stated vertical pull force is 30 pounds on a steel plate, which helps indicate the holding strength for this specific contact condition.

The rubber-coated round base measures 1.69 inches in diameter. Its coating helps protect painted surfaces from scratches and limits slipping on smooth surfaces. For outdoor setups, the magnets have three layers of corrosion-resistant coating, and the outer rubber coating is waterproof. Match the stud and attachment hardware to the hole or threaded point on the item you’re mounting.

What you’ll notice day to day

A threaded stud makes it easier to attach compatible equipment than a flat magnet that needs a separate bracket. Use the bases to position items such as cameras, light bars, tools, or magnetic license plate holders on suitable steel surfaces. For example, a temporary display or banner on a steel garage door can use the magnetic bases for placement, while the threaded connection provides an attachment point for compatible hardware.

The rubber contact surface is useful when the finish underneath matters: it helps reduce scratching and slipping while keeping the setup removable. Buyers also highlight the magnets’ strength, protective coating, and range of uses. Some appreciate the simple stud-and-nut attachment, while opinions about overall value are mixed.

Key points

This six-piece set uses neodymium magnets inside round, black rubber-coated bases. Each base has a 1/4-inch male threaded stud, and the stated vertical magnetic pull force is 30 pounds on a steel plate. The base diameter is 1.69 inches. The described accessories include bolts, 1/4-inch spring washers, 1/4-inch flat washers, and 1/4-inch nuts, offering options for securing compatible hardware through a hole or to a threaded point.

The practical distinction is between a magnetic mount and a permanent installation: these bases let you attach hardware to a suitable steel surface and remove or reposition the setup, while a drilled mount is designed for a fixed attachment to its mounting surface. That makes this set useful for applications where a threaded connection and removable magnetic placement are both helpful.

Before you decide

What is included? The set includes six threaded magnets, along with bolts, 1/4-inch spring washers, 1/4-inch flat washers, and 1/4-inch nuts for attaching compatible hardware.

What does the 30-pound pull-force rating refer to? It is the stated vertical magnetic pull force on a steel plate. The mounting surface and attachment should suit the item being held.

Can these magnets be used outdoors? The magnets have three layers of corrosion-resistant coating, and the outer rubber coating is waterproof. They are described for outdoor use, including mounting applications on suitable steel surfaces.

Final verdict

DIYMAG’s six-pack is designed for removable mounting jobs that call for a 1/4-inch threaded stud, a rubber-coated base, and magnetic attachment to steel. It’s a great fit if you’re setting up compatible cameras, lights, tools, or display hardware and want the protective contact of a rubber-coated base alongside a threaded connection.