CCCEI Clamp-On Power Strip with 15 Outlets

When outlets are hard to reach behind a desk, a strip mounted at the desktop edge can make everyday plugs easier to access. The CCCEI clamp-on power strip puts its outlets and USB charging ports within reach instead of down by the floor.

Its clamp attaches without drilling, while a 15-foot flat, right-angle plug helps reach an outlet behind furniture.

That setup is aimed at a busy desk, but the edge needs to fit the clamp’s stated limit.

Best use cases

This makes the most sense for a home office or workstation with several desk electronics and limited room for a power strip on the surface. Mount it at the edge and you can plug in devices without crouching to find an open outlet, the widely spaced outlet is also intended to accommodate a larger plug alongside the others.

For example, a laptop, monitor, and smaller accessories can stay connected at the desk rather than running to a floor-level strip. The listing says the unit can run up to 19 devices, but that figure shouldn’t be read as permission to exceed its stated electrical output: the strip is rated at 125V, 60Hz, 12A, and 1500W. From the way it is set up, it’s best viewed as a tidy access point for desk equipment, not a reason to add more load than your devices require.

Product specs

The strip has 15 AC outlets, a QC 3.0 USB-A port, a PD 3.0 USB-C port rated at 65W, and two standard smart USB-A ports. The product description says the USB-C port can power a laptop. It lists the QC 3.0 port at 5V/3A, 9V/3A, and 12V/3A, the PD 3.0 port at 5V/3A, 9V/3A, 12V/3A, 15V/3A, and 20V/3.25A, and the smart USB-A ports at 5V/2A.

Its dimensions are 8.46 by 2 by 2 inches, and the clamp fits a desktop edge up to about 1.6 inches wide. The body is made of ABS and fireproof material, with a protective pad for the desktop. The listing also specifies 1200J surge protection, an on/off switch, and short-circuit, grounding, overload, and over-voltage protection. Check that each port works properly before use, as the product instructions advise.

Where it shines

The main advantage over a basic power strip is placement: you can keep connections close at hand without taking up much desktop space or making holes in the table. The 15-foot flat plug offers flexibility when the nearest wall outlet is awkwardly positioned, and the USB ports give you a way to charge compatible devices without using separate wall adapters.

You’ll appreciate it if you want a fixed, easy-to-reach hub for desk electronics and your desktop edge is within the clamp limit. But does that convenience matter if your current strip already sits within arm’s reach? If not, the clamp and extra ports may add clutter rather than solve a real problem. It’s not for you if your desk edge is too thick for the clamp, or if you need a power solution for equipment beyond the stated 1500W rating.

Buying verdict

Choose this CCCEI if your priority is bringing multiple outlets and USB charging to the edge of a crowded desk, especially when reaching the wall outlet means bending or moving furniture. The clamp-on design avoids drilling and keeps the strip off the desktop, which is a useful alternative to a conventional strip sitting on the floor or taking up work surface.

Skip it if your desk edge exceeds about 1.6 inches, you don’t need the extra connection points, or you’d rather have a movable strip than one mounted to the desk. Its benefit depends on a compatible edge and a layout where the long flat plug can reach, those practical details matter more than the number of ports alone.