CCCEI Clamp-On Power Strip with 15 Outlets

When a desk has more chargers and small electronics than nearby wall outlets, moving power up to the desktop can make the setup easier to manage. This CCCEI clamp-on power strip has 15 AC outlets, USB charging ports, and a 10-foot flat-plug cord, so you can keep connections within reach instead of bending down to the floor.

If you prioritize a cleaner, accessible desk edge, the clamp mount avoids drilling holes, if you prefer a simple strip that sits on the floor or under a desk, this format may add hardware you don’t need.

Getting the most from it

Clamp the unit to a desk edge with a thickness no greater than the stated 1.6-inch maximum. Its plastic pad is intended to help protect the desktop, while the compact housing measures 8.46 inches long, 2 inches wide, and 2 inches high. If your desk edge is close to the limit, measure it first, without that measurement, fit is uncertain.

The 10-foot cord ends in a right-angle flat plug, which can be useful when the outlet is behind furniture or close to a wall. On a workday, you could keep a monitor, desk lamp, and other small devices plugged in at the edge, then use the USB ports for a phone or other USB-powered device. A widely spaced outlet leaves room for a larger plug.

Why it’s worth it

The main appeal is access: 15 AC outlets plus QC 3.0 USB-A, PD 3.0 USB-C, and two standard smart USB-A ports bring several charging options to one spot. The product is described as supporting up to 19 devices, but that count shouldn’t be read as permission to exceed its total output rating of 125V/60Hz, 12A, or 1500W. Add up the demands of connected equipment, especially when using several higher-draw devices.

The USB-C port is rated up to 5V/3A, 9V/2.22A, or 12V/1.66A when used alone, QC 3.0 USB-A supports up to 5V/3A, 9V/2A, or 12V/1.5A. The two standard smart USB-A ports provide 5V/2A. It also has a 1200J surge-protection rating and an on/off switch, along with listed short-circuit, grounding, overload, and over-voltage protections. Check that each port works properly before putting the strip into regular use.

The essentials

You’ll appreciate it if you want outlets and USB charging close to your hands without making holes in the desk. The ABS and fire-resistant construction, clamp format, and compact dimensions are aimed at a fixed desktop setup rather than a portable power strip. One tradeoff is that the clamp depends on a suitable desk edge, it won’t solve a shortage of usable power if your furniture can’t accommodate the mount.

When it makes sense

This is a practical fit for a desk with several small electronics, bulky adapters, and phones or other devices that charge by USB. Better avoided if your desk edge exceeds the 1.6-inch limit, or if you need a strip for travel or floor-level placement. Choose it for reachable, organized desktop power, choose a basic standalone strip instead when a clamp mount and USB charging aren’t priorities.