CAMMOO Adjustable Trailer Hitch for 2.5-inch Receiver, 6-inch Rise/Drop, Dual Ball Mount (2" & 2-5/16"), 22,000 lbs GTW
Product description
The essentials
If your trailer height doesn’t line up with your truck—or you just want one hitch that can adapt to different setups—this CAMMOO adjustable trailer hitch is built for that problem. It’s designed around a 2.5-inch receiver, with a 6-inch rise/drop range so you can level the hitch and keep the tow more comfortable and predictable.
On paper, it also targets heavier towing needs thanks to its dual-ball setup and class III–V coverage. The adjustable shank and locking design are meant to reduce common annoyances like noise and side-to-side movement—things you notice quickly on rough roads.
One limitation to keep in mind: the receiver size matters. If your vehicle doesn’t have a 2.5-inch receiver, this one won’t be the right match.
What it’s for (and what “adjustable” really changes)
This is a trailer hitch / tow link system that connects to a 2.5-inch receiver. The key idea is height correction: you install it facing up for a higher trailer or down for a higher vehicle, then fine-tune leveling in 1-inch increments.
In real life, that means less guesswork when you swap trailers, change your load, or deal with a vehicle that sits differently than you expected. For example, if your camper sits a bit low when hitched, dialing in the rise/drop can help bring the trailer closer to level—so the connection feels steadier and the tow is less “fussy.”
Key compatibility details to verify first
Before buying, check your truck’s receiver size. This hitch is designed for a 2.5-inch receiver.
Also, pay attention to ball selection and towing capacity needs. The dual-ball system includes: - A 2-inch ball rated up to 15,000 lbs - A 2-5/16-inch ball rated up to 22,000 lbs
If your use case doesn’t line up with those ratings—or if your trailer/towing requirements are unclear—this is one of those “measure twice” situations. When it comes to towing, being off by even one detail can matter.
Where it shines: stability, noise control, and theft resistance
CAMMOO focuses a lot on the in-between motions that create rattle and looseness. The design uses multiple dampening measures intended to reduce movement and noise at several key interfaces—at the lock, between the receiver and shank, and around the U-channel area near the hitch ball.
It also includes a U-shaped alloy steel anti-theft pin with an instant one-press lock. The intent is simple: keep the hitch from shaking loose on rough roads and add a layer of security without making your daily routine more complicated.
That’s the “day-to-day” appeal here. This isn’t just a height adapter, it’s trying to be quieter and steadier once everything’s installed.
Tech summary (what to expect from the build)
What stands out
- Adjustable rise/drop: 6-inch total adjustment, with 1-inch increments
- Dual-ball capability: includes both 2-inch and 2-5/16-inch ball options
- Anti-theft design: U-shaped alloy steel U-channel with a one-press locking pin
- Heavier-duty intent: built around solid shank (not a hollow tube) to help prevent twisting under load
- Noise reduction approach: uses multiple O-rings and silencer pads to limit movement
Keep in mind that the stated “class III–V” and GTW language describes the intended range for this setup, but your real-world safe towing still depends on matching your trailer requirements correctly and using the correct ball.
Pros, cons, and who this is best for
Pros
- Flexible height matching thanks to the rise/drop range and incremental tuning
- Dual-ball system supports different ball sizes without swapping the entire hitch style
- Comfort-focused approach aimed at reducing noise and sway at the connection points
- Security-minded with a U-shaped anti-theft locking pin
Potential downsides
- Not for other receiver sizes: if your vehicle isn’t set up for a 2.5-inch receiver, you’ll need a different hitch style.
- Can feel like overkill if you only ever tow light loads and never need height adjustment—this is more “capable and adaptable” than “simple and minimal.”
It makes the most sense if you regularly tow with different trailers (or you’ve ever had the trailer sit too high or too low and wanted an easier leveling solution).
Care & maintenance (quick, practical)
To keep the lock and movement smooth, it helps to periodically wipe off road grime around the receiver interface and the locking area. If you tow off-road or in wet conditions, make it a habit to clean around the pin area before it turns into a grit-and-rust problem.
Also, check that all connection points are properly seated after adjustment changes—especially since you’ll be using the rise/drop settings in increments.
Buying verdict
This CAMMOO adjustable trailer hitch is worth considering if you have a 2.5-inch receiver and want one setup to handle height mismatches with a 6-inch rise/drop range. The dual-ball design and the anti-theft U-shaped alloy steel pin make it more practical than “just a mount,” especially if you tow more than once and don’t want everything to rattle on rough roads.
You may want to skip it if your vehicle uses a different receiver size, or if you only need a fixed, simple hitch with no real reason to adjust height. In short: it’s a strong match for buyers who value adjustability, steadiness, and a more secure feel at the connection.
Mini FAQ
Is this hitch compatible with a 2-inch receiver?
No. This model is designed for a 2.5-inch receiver, so you should confirm your receiver size before ordering.
Which ball size should I use?
It includes a 2-inch ball (up to 15,000 lbs) and a 2-5/16-inch ball (up to 22,000 lbs). Use the ball that matches your towing requirements.
How do I adjust the rise/drop?
Install it facing up or down depending on whether you need a higher trailer or higher vehicle, then fine-tune the level in 1-inch increments.
Does it help with hitch noise?
The design uses multiple dampening measures (like O-rings and silencer pads) intended to reduce noise and movement at several connection points.
Does it include an anti-theft feature?
Yes. It uses a U-shaped alloy steel anti-theft pin with a one-press locking mechanism.