Arklove 3-Pin XLR Male to Dual 1/4-Inch TS Y-Splitter Cable, 1 ft

Gold-plated connectors and double shielding give this Arklove Y-splitter practical features for routing audio between different connector types. Its 3-pin XLR male plug connects to two 1/4-inch TS mono plugs, helping link compatible audio gear without separate adapters.

At 1 ft, the cable suits nearby equipment in a recording, mixing, or speaker setup. Color identification helps distinguish the connections when setting up or tidying a group of cables.

The OFC core, flexible PVC jacket, and strain relief are designed for steady signal transmission and everyday handling. Here’s what to know when choosing and using this XLR-to-dual-TS cable.

Why it’s worth it

This cable combines an XLR male connection with two 1/4-inch TS mono connections in one Y-shaped lead. That format is useful when your setup has a 3-pin XLR connection on one side and two 1/4-inch mono connections on the other. For example, it can connect compatible recording or mixing equipment to an amplifier, speaker, or audio interface with matching inputs. Check the connector types on your equipment and match them to the cable ends before connecting.

The 24 AWG oxygen-free copper core is selected for conductivity, while aluminum foil and braided copper provide double shielding. Together, these construction details are intended to support stable audio transmission and help reduce unwanted noise. Gold-plated connectors are designed to resist oxidation and reduce contact resistance. The result is a cable built around the practical demands of connecting and moving audio equipment, rather than a collection of separate adapters.

What matters most

The key choice is the connector layout: one 3-pin XLR male plug splits to two 1/4-inch TS mono male plugs. The TS connectors are mono, so this is a Y-splitter for setups that use those connections, it is not a cable with two 1/4-inch TRS plugs. Its 1-ft length is suited to equipment placed close together, such as adjacent components on a desk or rack.

A locking XLR male connector helps keep that connection secured once seated. The cable has a 6.0 mm outer diameter, a PVC jacket intended to resist tugging and tangling, and strain relief designed for repeated bending. These details matter when equipment is repositioned or cables are handled during a session. RoHS compliance is also listed for this cable.

Practical tips

Before connecting, identify the XLR and 1/4-inch ports on the equipment and confirm that the two TS plugs match the intended connections. Seat the XLR plug so its locking mechanism engages, then arrange the cable without pulling sharply at either connector. This is especially helpful when setting up nearby gear that may be moved between recording, mixing, or playback tasks.

For a setup with one XLR connection and two matching mono 1/4-inch connections, the Y format keeps both TS branches together along a single cable run. If your equipment uses a different connector format, choose a cable that matches those ports instead. The black PVC jacket and color-identification feature make the cable easier to pick out among connected audio leads.

Is it worth it?

For users whose equipment calls for a 3-pin XLR male connection and two 1/4-inch TS mono plugs, this Arklove cable brings the required connector arrangement together in a short, straightforward lead. Its 1-ft length works for close-by components, while the shielded OFC construction, locking XLR plug, and strain relief address useful details for regular audio setups. Choose it to connect compatible microphones, mixers, recording gear, amplifiers, or speakers where those specific connections are needed.