AMBULL Tractor Bucket Grab Hook Grade 70 Bolt-On Tow Hook, 3/8" Mount (2-Pack) — Forged Steel

What you’re really buying

If you move a tractor bucket around, tow a trailer, or secure gear in an RV/UTV/truck setup, a grab hook that mounts solidly matters more than people think. This AMBULL bolt-on grab hook is built for that job: forged steel, Grade 70-rated for lifting/towing-style use, and designed to be installed to a bucket (or similar mounting points) using bolts and a backing plate.

On paper, it’s the kind of hardware you buy when you want a straightforward way to attach chains, secure tie-down runs, or create a practical tow/anchor point. Still, it’s not a universal “anything goes” solution—where it shines depends on whether your mount and load needs match what the hook is intended for.

Key points: where it helps day to day

This is a bolt-on grab hook system meant to stay put under load instead of relying on flimsy brackets. The forged steel hook is paired with a welded backing plate and a bolted mount design, so you get a more rigid connection at installation.

Here’s a realistic micro-scenario: you’re using a tractor bucket to move debris, then switch tasks and need a reliable point to hook a chain. With a properly installed grab hook, you can attach the chain confidently for pulling or securing, and you’re not improvising with random straps and hardware.

The essentials: build, load rating, and mounting

AMBULL positions these hooks as Grade 70 forged steel, with a stated break strength “up to 15,000 lbs.” The product listing also describes a WLL concept (work/load limit) tied to Grade 70 level and includes “3/8" tow hook mount” language for the mounting interface.

A few details that stand out for reliability:

• The hook is described as forged steel, with galvanizing and an energy-coated layer intended to help with rust and corrosion resistance.
• Each support includes Grade 10.9 bolts and a locking nut (listed as 1/2 x 2-1/5 inches).
• The hook is welded onto a steel plate backing described as 1/4" thick, with plate dimensions listed as 8.25 x 10.8 cm.

It’s also designed to work well with chains and ratchet straps (“carpetas” in the base description) for securing cargo or for towing-style anchoring.

What to know before you install

This is a “bolt-on” setup with a backing plate, which is great for stability, but it also means install fit matters a lot. You’ll want to confirm:

• Your tractor bucket (or chosen mount surface) has a compatible location for the 3/8" tow hook mount interface.
• You’re using the included grade hardware correctly and torquing/positioning it as intended.
• Your load expectations fit the stated rating context. The listing includes a maximum break strength figure, but no broader safety guidance is provided here—so if you’re planning heavier or frequent lifting, you’ll want to be extra careful and follow your own load/safety standards.

One limitation to keep in mind: the listing text describes the hook as “work well for tractor bucket, RV, UTV, truck,” but it doesn’t spell out exact compatibility patterns for every model or mounting layout. If your setup is unusual, you may need to double-check that the backing plate and bolt pattern will land where you need.

Strengths vs. potential downsides

These hooks feel like a solid mid-level buy in terms of hardware approach: Grade 70 forged steel, plated/welded backing, and corrosion-resistant coating. The use of Grade 10.9 bolts and locking nuts also signals they’re aiming for a secure, vibration-tolerant connection.

But it might not be the best choice if:

• You need a quick-swap hook system that doesn’t require bolting and plate alignment.
• Your mount area can’t support the backing plate thickness and placement.
• You’re looking for something that’s fully “drop-in” without checking fit.

For people who already have an install plan, though, it’s the kind of tow/anchor hardware that can simplify securing loads and improving consistency compared with temporary methods.

Tech specs

• Type: Grab hook / tow hook mount
• Material: Forged steel (coated for corrosion resistance)
• Mount size: 3/8"
• Load strength (stated): up to 15,000 lbs (break strength)
• Backing plate thickness: 1/4"
• Backing plate dimensions: 8.25 x 10.8 cm
• Included hardware: Grade 10.9 bolts and locking nut (1/2 x 2-1/5 inches)

FAQ

How do these hooks work—chains, straps, or towing?

The listing says they work well with chains and ratchet straps to secure a load, and they can also function as a tow hook for tractor bucket, RV, UTV, and truck applications.

Is the mount meant for a tractor bucket only?

No. The base description explicitly mentions tractor bucket and also says it works for RV, UTV, and truck-style uses—just keep in mind that bolt-on fit still depends on your mounting location.

Do they resist rust and corrosion?

According to the description, the hook is galvanized and coated to help avoid rust and corrosion.

Are these hooks replaceable as a pair?

You get a 2-pack, so for many setups it’s convenient to install matching hooks on both sides or on paired anchor points.

Should you buy it?

A solid pick if you want a forged, Grade 70-rated bolt-on grab hook with a welded backing plate, and you’re ready to confirm fit on your tractor bucket or mounting surface. It makes sense for securing loads with chains/ratchet straps or setting up a tow/anchor point for an RV/UTV/truck use case.

You may want to skip it if you need a truly universal, no-check installation or a system that doesn’t involve bolting and alignment work. Also, if your intended use is outside the assumptions of a tow/secure hook setup, this is one of those items where you’ll want to be conservative and double-check your load/safety requirements before trusting it.