Acquaer 715787852451 Automatic Pool Cover Pump, 1/4 HP, 2,250 GPH

A hands-on approach to pool-cover water means checking and removing buildup yourself. This Acquaer pump is designed to handle that task with automatic operation, so it can start when it detects water and shut off after pumping it down.

Its 1/4 HP motor moves up to 2,250 gallons per hour, while the bottom-suction design removes water down to 3/4 inch. That makes it useful for standing water on pool covers as well as in hot tubs, spas, rooftops, window wells, and other listed areas.

A 25-foot power cord and included check-valve hose adapter support setup, and the strainer base helps keep debris away from the pump while protecting the cover beneath it.

Getting the most from it

Place the submersible pump on the area where water collects, then connect the discharge using the included 3/4-inch garden hose adapter with check valve. The pump also has a 1-1/4-inch NPT discharge. Its automatic switch starts when it detects water at 2 inches. As the water level drops to approximately 2/5 inch, the pump runs for an additional 60 seconds before turning off.

The bottom-suction design is intended to draw water down to 3/4 inch, making it a practical choice for clearing a pool cover after rain or removing collected water from a hot tub or rooftop. The strainer base can be cleaned without tools or screws, and its design filters debris while helping stabilize the pump. A built-in temperature-control core helps protect the motor when water runs low.

Spec sheet

• Type: Automatic submersible pool cover pump
• Power: 1/4 HP, 115 volts
• Maximum flow rate: 2,250 GPH
• Maximum lifting height: 21.5 feet
• Minimum suction level: 3/4 inch
• Power cord: 25 feet, three-prong plug
• Discharge: 1-1/4-inch NPT, 3/4-inch garden hose adapter with check valve
• Material: Thermoplastic
• Dimensions: 12.4 × 7.9 × 17.5 inches
• Weight: 12.2 pounds
• What’s included: Automatic pool cover pump, 3/4-inch check valve adapter, and manual

Pros

Automatic switching reduces the need to stay beside the pump to manage each stage of water removal. The stated flow rate and low suction level suit pool-cover cleanup where water can collect over a broad surface, while the long power cord gives flexibility in positioning around the work area. For buyers choosing between manual removal and a pump-based approach, this model combines water detection, automatic shutoff, and a strainer base in one submersible unit.

Customers often praise its pumping power, water removal, and straightforward setup. Feedback on automatic operation and reliability is mixed, and some buyers raise concerns about durability. Those experiences are useful context when deciding how much to prioritize automatic handling alongside the pump’s stated specifications.

Is it worth it?

This Acquaer pump is a strong fit for recurring standing water on pool covers and similar surfaces when automatic operation and bottom suction are priorities. Its 2,250 GPH maximum flow, 3/4-inch suction level, and included hose adapter give it a clear role in routine water removal, while the strainer base and tool-free cleaning help make upkeep more direct. Choose it for a submersible pump designed to manage collected water across pool covers, hot tubs, rooftops, and other listed applications.