TRAMILY 6PCS Solar Panel Mounting Bracket White Rectangle Set – Corner and Side Supports for Flat Surfaces
Product description
What this kit is and what it solves
This is a 6-piece mounting bracket set designed for solar panels, supplied in white with rectangle corner and side supports. The kit is pitched as a drill-free option when used with silicone sealant, suitable for mounting solar panels on caravan, van roofs, sheds, garages, and boat decks. It’s built from ABS plastic and claims UV resistance, aiming to protect the panel edges and corners while lifting the panel enough to aid airflow underneath.
How it works in practice
On roofs or flat surfaces, these brackets are positioned at the panel’s corners and along the sides to create a raised, stable base. When you apply the silicone sealant (not included) and press the brackets onto the surface, you can secure a quick, drill-free installation. If extra stability is required, you can drill through the prepared holes in the lateral brackets and fasten with screws (screws not included). The design includes waterproof PG7 grommets for cable entry and rubber rings to tidy the wiring, helping keep the cable tidy and preventing loosening at the head.
Build quality and materials
The primary material is ABS plastic, marketed as strong, UV-rated and environmentally friendly. This suggests reasonable resistance to outdoor conditions, but as with any plastic mounting system, longevity will depend on exposure, temperature cycles and maintenance. The corners are reinforced to cushion the panel from impacts and reduce potential edge damage during transport or movement.
What stands out (pros)
- Drill-free installation option, handy for quick setups on caravans, motorhomes or sheds where drilling isn’t desirable.
- UV-resistant ABS construction offers a balance of light weight and weather exposure tolerance.
- Corner and side brackets provide a raised mounting height that can improve airflow under the panel, which helps with cooling in hot climates.
- Includes waterproof entry points and rubber rings to tidy and secure cables during the wiring process.
Where it may fall short (cons/limitations)
- The drill-free method relies on silicone to seal and secure, which may not be as robust as screws in high-vibration environments or in areas with frequent movement.
- Screws and silicone are not included, so plan for additional purchases if you want a fully secured installation.
- The kit is described as suitable for a range of flat surfaces, but actual fit will depend on panel size and roof geometry, larger panels or curved surfaces may require different mounting solutions.
Who this is for
If you’re setting up a solar panel on a caravan, van, boat deck, shed roof or similar flat exterior, and you want a simple, low-drill option to get the panel up and running, this kit could suit you. It may appeal to DIY enthusiasts who value quick installs and don’t mind handling silicone sealant themselves. It’s probably most appropriate for light-to-medium panel sizes and surfaces where a fully bolted mount isn’t essential.
Who it isn’t ideal for
If you need a heavy-duty, vibration-proof installation or you’re working on a surface that experiences a lot of movement, you might prefer a mount with primary mechanical fastenings rather than a silicone-bonded setup. Similarly, if you require metal or higher-capacity brackets, this ABS-based kit may not meet those expectations.
When it makes sense to buy
- You want a quick, non-permanent mounting option for a solar panel on a flat caravan, camper, shed or boat surface.
- You’re comfortable applying silicone sealant and potentially drilling through pre-made holes for extra rigidity.
- You’re looking for a low-cost, lightweight solution that provides raised clearance for better airflow.
What to check before purchasing
- Confirm your panel size and whether the corner and side brackets align with the mounting points on your panel.
- Check surface compatibility, ensure the roof or surface can tolerate silicone bonding and any added weight.
- Consider what screws or sealant you’ll need to complete the installation and whether they’re included in your purchase plan.
- Think about the overall system layout: drainage, cable routing and proximity to the controller and battery.
Practical use scenario
Imagine you’re mounting a small solar panel on a campervan roof. You clean the surface, lay a bead of silicone, press the corner and side brackets into place, and lay the panel on top. The raised profile allows air to flow beneath, which helps cooling on sunny days. If you later decide to move the system, you can detach and re-seat with a new bead of sealant. For a more secure setup in exposed locations, you might drill through the side brackets and use appropriate screws, knowing the kit supports this option.
In the box / What you get
- 4 corner mounting brackets
- 2 side mounting brackets
FAQ (non-technical, practical answers)
- Do I need to seal the brackets? Yes, silicone sealant is recommended to achieve a watertight bond, though it is not included in the pack.
- Can I install without drilling? Yes, there is a drill-free option using the silicone method, but you can also drill through prepared holes for extra stability.
- Will these fit any solar panel size? The description suggests suitability for various sizes, but you should verify that the corner and side brackets align with your panel’s mounting holes and frame.
Is it worth it?
A solid option if your priority is a simple, lightweight, drill-free mounting approach for a flat surface and you’re prepared to add sealant and potentially screws for added security. It may not be the best choice if you require maximum rigidity in high-vibration environments or for very large panels.
Final thoughts
For a practical, cost-conscious setup on caravans, boats or garden sheds, this kit provides a straightforward path to get a solar panel working without major fabrication. If you value speed and ease over brute-force mounting, and you’re mindful of the limits around vibration and long-term weather exposure, it’s worth keeping in mind as a viable option.