FORTEM Ratchet Straps Tie Down Kit (4-Pack) – 748kg break strength, 4.6m x 2.54cm
Product description
If you move things around—motorbikes, bikes, kayaks or general cargo—ratchet straps are one of those purchases that either save you hassle or end up feeling flimsy. This FORTEM ratchet strap kit is built around a simple goal: make it easier to strap loads down firmly using metal ratchet buckles, soft loops and S-hooks, then tighten with a proper ratcheting mechanism.
What it is and what it’s for
This is a 4-pack ratchet tie down strap set designed for use with vehicles like cars, SUVs and trucks, including towing scenarios and roof rack transport (the kit is aimed at creating secure tie-down anchor points with straps, loops and hooks). The included soft loops are particularly handy if you’re trying to route the strap through or around a load in a controlled way, while the S-hooks are meant to attach to suitable points.
A practical example: if you’re loading a motorcycle or a couple of bikes onto a trailer, you can loop the strap where it makes sense, hook onto the trailer’s anchor points, then use the ratchet to take up slack in a controlled way. It’s the kind of setup that helps you stop loads shifting during typical road travel.
Key takeaways (the parts you’ll feel)
On paper, the stand-out is the mix of materials and the strap hardware. You get metal ratchet buckles with rubber grips, plus rubber-handled latch/release operation to make tightening less awkward when you’re working quickly. The webbing is polyester, and the kit also calls out strong break strength (alongside a listed working load capacity), with the S-hooks coated for added weather resistance.
Still, it’s worth being a bit cautious: strap strength numbers don’t remove the need for correct attachment. If you anchor to weak points, route the strap over sharp edges, or over-stress the setup through poor angle or placement, you can reduce the real-world benefit—so the kit is only as “safe & secure” as the way it’s used.
Where it shines for day-to-day tying down
This set is positioned as a solid, general-purpose tie down solution for common hauling jobs rather than a niche, ultra-specialist rig. It’s described as suitable for securing a range of items such as a motorcycle, bike, kayak, UTV/ATV and typical cargo like boxes and coolers.
It also makes sense if you value a kit that gives you multiple straps in one go. With four pieces included, you’re more likely to create a stable arrangement without needing to scavenge extra straps from around the house.
What you’ll notice in use
The rubber grips and ergonomic handle design are the sort of details that matter once you’re tightening repeatedly. If you’ve used cheaper straps with hard handles, you’ll know the difference: the grip is meant to be comfortable when ratcheting, and the release latch is described as simple to operate.
One more small point: the soft loops are included, which can make it easier to set up tie-down points around the load. That won’t magically solve bad anchoring, but it can remove some friction in getting the strap where you want it.
Tech specs
- Working load capacity: 249.3kg
- Break strength: 748kg
- Strap width: 2.54cm
- Strap length: 4.6m
- Pack size: 4 straps
- Included hardware: 4 metal ratchet buckles with rubber grips, 4 soft loops, S-hooks with coated finish
- Release/handles: rubber coated stainless steel handles with release latch
Who it’s for (and who should pause)
It suits you if you want a straightforward ratchet strap kit for routine transport tasks—especially when you need multiple tie-down points for a motorcycle, bikes or lighter-to-medium cargo on trailers or a vehicle roof rack.
It may not be the best choice if you’re expecting a professional-grade rigging system for unusual load geometry or specialist lifting/rigging. Also, because attachment quality matters so much, you should only buy if you already have (or can use) appropriate anchor points on your trailer/vehicle and understand how you’ll route and tension the straps.
If you’re not sure whether your intended use matches the listed working load capacity, it’s sensible to pause and check before buying—don’t treat the strength figures as a green light to improvise anchoring.
Careful checklist before you buy
Before committing, it’s worth checking a few practical things. First, confirm the strap length (4.6m) and width (2.54cm) suit how you plan to tie down your loads. Second, think about where the S-hooks and loops will connect—weather-resistant hooks are helpful, but they still need to be attached to suitable points. Finally, plan to tension and inspect as you load, rather than assuming one quick ratchet will be enough.
Is it worth it?
This FORTEM ratchet strap kit is a sensible buy if you want a multi-strap set with ratchet buckles, rubber grip handles, soft loops and coated S-hooks for everyday secure transport—motorcycles, bikes, kayaks and general cargo. The listed working load capacity and break strength suggest it’s aimed at dependable tie-down performance, not just decoration.
You may want to skip it if your use case requires more specialised rigging solutions, or if you don’t have confidence in your anchor points and strap routing. In short: it’s strong on the fundamentals, but it can only be as safe as the way you set it up.
Mini FAQ
What straps are included in the 4-pack?
The set includes four ratchet tie down straps with metal ratchet buckles (with rubber grips) plus soft loops and S-hook hardware.
How strong are these ratchet straps?
They’re listed with a working load capacity of 249.3kg and a break strength of 748kg.
Are the hooks weather resistant?
Yes, the S-hooks are described as coated for added weather resistance.
What vehicles and loads are they meant for?
They’re described for securing items to cars, SUVs and trucks, with use-cases including motorcycles, bikes and kayaks, as well as cargo like boxes and coolers.
Do they come with a warranty?
Yes, the description mentions a one-year warranty.