Solar Powered Wireless Reversing Camera Kit with 7" 1080P Touchscreen Monitor and 12000mAh Battery

What it is (and what it’s trying to solve)

This Solar Powered Wireless Reversing Camera Kit is built for drivers who want rear-view help without the usual hassle of hard-wiring a reversing camera. On paper, the pitch is simple: mount a wireless magnetic rear camera on a metal surface, plug the 7" touchscreen monitor into a cigarette lighter, and you’re ready to view what’s behind you. It also aims to be usable beyond basic reversing, because it supports DVR recording and includes a TF card.

One thing to be clear about: “wireless” and “no drilling, no wiring” are the core convenience features here, but they don’t eliminate the need for sensible positioning. If your mounting surface or line of sight isn’t ideal, performance can be affected.

The setup experience: fast and tool-light

The headline feature is the 1-minute DIY setup. Rather than routing cables, you power the 7 inch touchscreen monitor by plugging into the cigarette lighter socket. The rear camera uses a strong magnetic base, so you can attach it to any suitable metal part of your vehicle. That makes it easier to move the camera between a car, a van, or a motorhome, depending on your setup.

A practical example: if you’ve got a van that you sometimes use for commuting and sometimes for weekend storage, you can attach the camera before a trip, remove it when you’re done, and avoid leaving wiring on display. It’s convenient, though you’ll want to make sure the magnet holds firmly in real conditions (road vibration, wet weather) rather than only testing it once in the driveway.

What you get on the screen (and how it behaves)

The system includes a 7" touchscreen monitor and a 1080P HD colour CMOS sensor. The monitor is described as Full HD with an IPS panel, with the idea of delivering clear monitoring images.

For night driving, the kit includes 6 infrared night vision LEDs. For reversing, that matters more than people expect—headlights can create harsh contrasts, and IR illumination helps maintain visibility when there’s little ambient light.

On operation, there’s an auto on/off camera behaviour: when the monitor is off, the camera goes into sleep mode (after about 1 minute) and wakes when the monitor is turned on. That should help reduce drain versus a camera left active all the time.

Power and durability: solar charging plus a 12000mAh battery

The rear camera is designed to run on a rechargeable 12000mAh battery, with two charging methods: Type-C and solar charging. The intention is obvious—during sunny drives, solar can help keep the battery topped up, while Type-C charging gives you control when sunlight is limited.

If you regularly get rain, muck, or road spray, the IP69K waterproof rating is the reassurance piece here. IP69K is positioned as “harsh weather” capable, which is relevant if you’re using it for vans or motorhomes rather than a tidy garage car.

Still, you should treat any outdoor camera system with the usual caution: keep it clean where possible and avoid placing it where water can pool heavily or where it’s constantly exposed to high-pressure jet washing.

Signal range and recording: the “real-world” trade-off

For wireless stability, the kit uses an upgraded round antenna. The stated coverage is up to 328ft (without obstacles), with the promise of a stable digital signal and loop recording.

This is one of those areas where it’s worth thinking about your use case. If you drive in environments with a lot of metal barriers, unusual vehicle layouts, or you mount the camera in a position that creates signal interference, you may not hit the full range stated. If you’re primarily using it for typical highway and everyday reversing, it sounds designed with that in mind.

For recording, it includes a 32GB TF card and supports up to 128GB TF cards. Loop recording is useful because it reduces the pressure to manually manage files—though you’ll still want to check storage occasionally, especially if you plan to review clips.

Key takeaways for buying decisions

Worth considering if you want a reversing camera kit that prioritises convenience: no drilling, no wiring, magnetic mounting, and a monitor you can power from a cigarette lighter.

It may not be a great match if you’re expecting a fully permanent, stealth installation. Magnetic mounting and plug-in power are convenient, but they generally suit users who value flexibility over a fixed, tidy cable run.

Also, if your vehicle doesn’t have a practical cigarette lighter socket for the monitor power, or if you’re set on a specific permanent mounting location, you may find the approach limiting.

Is it worth it?

A solid pick if you’re fitting a reversing camera for a van, motorhome, or multi-vehicle use case where you don’t want to drill holes or route cables. The combination of a 7" touchscreen monitor, 1080P CMOS sensor, IR night vision, DVR recording, and the solar/Type-C powered camera makes sense for drivers who want more than a basic live-view system.

You may want to skip it if you need guaranteed long-range wireless performance through obstacles, or if you’re after a permanently integrated installation. On balance, this feels more like a practical mid-range DIY-friendly kit than something designed to be invisible and permanently wired.

Quick FAQ

Will it work without drilling or wiring?

The kit is designed for a 1-minute DIY setup with no drilling and no wiring, powering the monitor via the cigarette lighter and using a magnetic base for the rear camera.

Does it support night vision?

Yes. It includes 6 infrared night vision LED lights for visibility in low light.

How does charging work?

The rear camera battery is 12000mAh and supports Type-C charging and solar charging.

Is it weatherproof?

It’s rated IP69K waterproof, which is intended for long-lasting performance in harsh weather.

Does it record videos?

Yes, it supports DVR recording with loop recording, and it includes a 32GB TF card (with support for up to 128GB TF cards).