SmallRig Super Clamp with Ballhead (4102) – camera mount clamp with quick release adapter

The essentials

If you mount cameras, monitors, or small lights in different places, a clamp like the SmallRig Super Clamp with Ballhead (4102) is the kind of accessory that can save a lot of fiddling. It’s built for attaching gear to round pipes and flat surfaces using threaded connections, and it adds a 360° rotating ball head so you can aim your setup quickly.

On paper, it’s a practical solution for action-style kit and content capture—anything from an action camera to a monitor or LED light that needs a stable mount without bringing out extra clamps every time. Still, it’s not a universal “anything goes” mount: you’ll need to pay attention to the supported rod diameter and the maximum surface thickness, and there’s a hard maximum load capacity.

It’s also worth noting that the product description mentions specific compatibility with certain SmallRig cages and GoPro Hero models (via a removable action camera adapter). If your setup doesn’t match those pieces, you may find it works, but not as seamlessly as the intended configuration.

What it’s for (and what it does well)

The 4102 is essentially a clamp system with threaded holes and a ball head. The key idea is straightforward: clamp it to something solid, then use the threaded connections to attach your gear—action cameras, camera monitors, LED lights and similar accessories.

In real terms, imagine setting up a desk test or a quick workshop shot. You clamp the mount to a table edge or a round pipe, loosen the ball head, tilt for your preferred framing, and then tighten the knob once you’ve got the angle right. The ball head’s ability to rotate through portrait and landscape orientation is handy if your filming style changes on the fly.

Where it tends to make the most sense is when you want a flexible mounting point for multiple accessory types, rather than a single-purpose stand.

Key features that matter in use

The clamp is designed around a few practical choices.

• Threaded connection points include 1/4”-20 and 3/8”-16 holes, which can help you connect a range of camera accessories that use standard tripod/rigging-style threads.
• The clamp has an adjustable jaw range, supporting a rod with a minimum diameter of 14mm and a surface up to a maximum thickness of 65mm. That’s an important constraint to check before you buy.
• There’s a 360° rotation ball head, locked with a knob, so you can fine-tune your angle and keep it where you set it.
• The clamp is described as aluminium alloy with an anodised finish and anti-scratch / anti-slip cushions. Those details matter because camera accessories aren’t light and surfaces aren’t always perfectly clean.

Tech specs

• Type: Camera mount clamp with ball head
• Threads: 1/4”-20 and 3/8”-16
• Max load capacity: 7.7 lb (3.5KG)
• Rod minimum diameter: 14mm
• Surface maximum thickness: 65mm
• Rotation: 360° ball head
• Material: Aluminium alloy (anodised CNC process as described)
• Anti-slip / protection: Built-in anti-slip cushions and anti-scratch design
• Product reference: 4102

Compatibility and requirements

The description states that the clamp includes a removable action camera adapter. It also says it fits for SmallRig GoPro Hero 11/10/9 Black Camera Cage 3084B and SmallRig Camera Cage for DJI Osmo Action 3 4119.

So, it’s a strong choice if your kit is already built around those cages/adapters. If you’re using different enclosures or a third-party mount system, the threaded holes may still be useful, but you may not get the same “intended fit” experience.

Also, because this is a clamp, your mounting surface matters. If the material you’re clamping to is soft, loose, or unstable, the anti-slip cushions help, but they can’t turn a weak surface into a solid one.

What to watch before you buy

This is where the 4102 can either feel like a bargain or a headache—depending on your setup.

First, double-check the maximum load capacity (7.7 lb / 3.5KG) against everything you plan to hang from it. If you’re building a heavier rig with multiple accessories, it’s easy to exceed expectations once you include monitors, lights, and any extra hardware.

Second, check the physical limits: minimum rod diameter and maximum surface thickness. If your “where I want to clamp it” is outside that range, you’ll be forced into a different mounting approach.

Is it worth it?

It’s worth buying the SmallRig Super Clamp with Ballhead (4102) if you want a clamp-based mounting point for an action camera, monitor, or LED light, and you value quick aiming thanks to the 360° ball head. It suits people setting up frequent filming sessions where you might re-position the camera quickly between portrait/landscape framing, or anyone who prefers clamping over permanent rails.

You may want to skip it if your planned load is near the limit, or if your mounting surfaces don’t match the stated rod diameter and surface thickness ranges. It can also be less straightforward if your action camera cage setup isn’t the ones listed with the removable adapter, because the “fits” claim is tied to specific compatible cages.

Mini FAQ

Will it fit a round pipe or a table edge?

The clamp supports a rod of minimum diameter 14mm and a surface up to 65mm thick, so it should cover many round-pipe and tabletop scenarios—as long as your thickness and diameter are within those limits.

Does it support portrait and landscape?

Yes. The ball head is described as 360° rotation, allowing you to adjust for portrait and landscape modes and lock the angle with the knob.

What threads does it use for accessories?

It’s equipped with 1/4”-20 threaded holes and 3/8”-16 threaded holes to connect compatible camera mounts and accessories.

Is there an adapter for action cameras?

There is. The clamp includes a removable action camera adapter, and the description specifically mentions compatibility with SmallRig GoPro Hero 11/10/9 Black Camera Cage 3084B and SmallRig Camera Cage for DJI Osmo Action 3 4119.

What’s the maximum weight it can hold?

The maximum load capacity is stated as 7.7 lb (3.5KG). It’s best to plan below that once you factor in the full rig you’re mounting.