RESTMO Extra Large Weatherproof Electrical Box Cover (IP54) for Outdoor Extension Leads and Power Connections
Product description
If you often end up wiring outdoor lighting or garden equipment with extension leads, the weak point is usually the connection itself. This RESTMO extra large weatherproof electrical box cover is designed to keep temporary cord connections more secure and protected from typical outdoor grime and weather.
On paper, it’s a practical “enclosure-first” solution: you place the plug/socket connection inside the cover, route the cable(s) through the entry ports, then seal and clip it down. It’s aimed at people who don’t want exposed joins hanging around in rain, snow, dust or dirt.
The essentials
The RESTMO cover is an outdoor extension lead / power connection protection box with an IP54 waterproof rating. It’s described as extra large, with overall dimensions of 12.6 × 8.7 × 5.1 in, and it includes 6 cable entry ports (4 on the front and 2 on the side). The enclosure uses clips, a top lid and rubber gaskets, which is exactly the kind of combination you’d look for when the goal is reducing water ingress around a connection.
There’s also a note worth bearing in mind: the package does not include a power strip. So you’re buying the protective box/cover for the connection, not the strip itself.

What it’s built to protect (and where it helps)
The intended use is quite broad, but it’s clearly about making outdoor temporary electrical connections less exposed. Think of holiday lights, landscape decorations, patio heaters, pool-related equipment, fountains, fish ponds, security cameras, and general garden tools that rely on a plug-and-lead setup.
A concrete example: imagine you’ve got a strand of Christmas lights or a garden accessory powered via a timer plug. Without any protection, the plug join and the exposed cable around it can sit in damp air or get splashed after rain. With a box like this, you’d put the timer plug and connection inside the enclosure, pass the cable(s) through the ports, then close and clip the lid so the join sits in the covered, gasketed space.
It’s also positioned as useful for some indoor setups where connections might be near moisture, dust, or splashy areas—though the IP54 angle makes the outdoor case the most obvious.


Cable entry design and sealing

One of the more useful details is how the box deals with different cable types. It’s described as a good match for sealing Ø1–12 mm cords, braided cable and flat wire. That means it should cover a wide range of common extension leads and accessories, at least in terms of cable thickness and format.
The kit includes 4 clips and rubber gaskets. The practical process is straightforward: place the connection into the safety seal enclosure, then clip the cord with the clamps and close the top lid. If your main headache is “getting the plug protected without faffing”, this approach is clearly designed for that.
That said, it’s still an enclosure for connections, not a guarantee that every cable and plug combination will fit neatly—space and shape depend on the specific plug/switch/timer you’re enclosing.
Where it shines, and the limits to watch
Where it shines is the weatherproof, reinforced enclosure concept: heavy-duty reinforced PP material is mentioned, and the protection targets rain, snow, water, dust and dirt. If you’re running temporary outdoor electrics seasonally (or you simply don’t want messy outdoor cable joins), it’s a sensible way to reduce exposure.

However, two limitations are worth keeping in mind. First, no power strip is included, so you’ll need your own extension lead, timer outlet, or power strip solution. Second, because it’s intended to protect a specific kind of connection, it may not be the best fit if you’re trying to weatherproof a setup that doesn’t match the size or port arrangement. In other words, it’s not automatically “one box for every weird plug shape”.
Tech specs
- Type: Weatherproof outdoor electrical box cover
- Protection rating: IP54 waterproof
- Overall dimensions: 12.6 × 8.7 × 5.1 in
- Cable entry ports: 6 total (front ×4, side ×2)
- Sealing range: Ø1–12 mm cords
- Suitable cable styles mentioned: braided cable and flat wire
- Material mentioned: heavy-duty reinforced PP
- Mounting: dual mounting holes (for hanging on walls)
- Package note: does not include a power strip


Quick buying checklist (so you don’t get caught out)
Before buying, it’s worth checking a few practical things.

First, measure or at least verify your cable diameter falls within the stated Ø1–12 mm sealing range. If your lead is unusually thick or bulky at the entry point, you may struggle to route it cleanly through the ports.
Second, think about plug and timer size. The enclosure is extra large, but “extra large” still doesn’t mean “every plug fits”. If your connection has a chunky adaptor, it may or may not sit comfortably under the lid.
Third, confirm you’re buying the cover box only. If your plan is “replace my power strip”, you’ll need separate components.
Finally, consider where you’ll mount it. Dual mounting holes are provided, so it’s intended for wall-hanging or similar placements—make sure you’ve got a suitable surface and position for outdoor cable routing.
Is it worth it?

A solid pick if you’re regularly dealing with temporary outdoor power connections—especially where you want the plug/socket join protected from rain, snow, dust and dirt, and you’re happy using your own extension lead, timer or power strip. It also makes sense if you need flexibility across common cable types (braided and flat wire) and want an enclosure-style setup rather than relying on exposed connections.
You may want to skip it if your plug and adaptor combination is very bulky or doesn’t seem likely to fit inside once sealed, or if you were expecting the power strip itself to be included. It’s also not the easiest answer if you only need protection for a single short use and would rather keep things simple.


Mini FAQ
Does it include a power strip?
No—the package does not include a power strip.

Is it suitable for outdoor use?
Yes, it’s described as IP54 waterproof and intended for outdoor temporary cord connection protection.
What cable thickness does it seal?
It’s described as sealing Ø1–12 mm cords.
How many cable entry points does it have?
It has 6 cable entry ports: 4 on the front and 2 on the side.
Can it be mounted on a wall?
Yes, it includes dual mounting holes for hanging on walls.
Products with discounts that might interest you
- Lebakort Hard Case for Anker SOLIX C300 DC Portable Power Station (288Wh / 90,000mAh)
- RESTMO Outdoor Waterproof Box (29 × 13.2 × 10cm) – IP54 weatherproof electrical box for outdoor plug extensions
- J-BRAUV Electric Hand Warmers 2000mAh
- Amdelne 5ft LED Batten Light 6000K
- ELRO FS1801 smoke detector 4-pack
- Lenovo PA-1450-55LK 65W Laptop Charger
- Magnetic Rechargeable Hand Warmers 8000mAh
- DEWENWILS Remote Control Sockets (30m/100ft range) – 1 Remote + 1 Programmable 13A Wireless Switch Plug
- ACEQINGSE Portable Charger 1800mAh for Galaxy Watch
- Miady 2-Pack Ultra Slim Magnetic Wireless Power Bank (5000mAh) with pass-through charging
- ADORIC Neck Reading Light book light
- Proster Voltage Tester non-contact pen with LED 🔌
- AICCOLO 20W USB-C Fast Charger with 2m Cable for iPhone and More – UK Plug
- MINIX 100W GaN Charger with 3 Ports and Smart Display
- Anker Nano Universal Charger 100W GaN USB-C Travel Charger, 4 Ports
- iPhone 17 20W Fast Charger with 2m USB‑C cable
- Baseus FC11 45W 20000mAh Power Bank with Dual Built-in USB‑C Cable (Retractable) and Smart Display
- USB C Fast Charge Plug 65W USB-C charger
- Addtam 5M Extension Lead with USB Slots and Braided Cord – 2 UK Outlets, 4 USB Ports (2x USB-C, 2x USB-A) with Surge Protection
- SIRYYUI COB Waterproof LED Strip Light IP65 10M (2700K Warm White, 384 LEDs/m, CRI90+) – 24V dotless tape light
- OUTON LED floor lamp 15W 1500lm
- Samsung 25W USB C Charger Two-Pack
- Warmco 10000mAh Portable Desk Fan (21cm) with Digital Display and USB-C Charging
- AOGUERBE Magnetic Wireless Power Bank 10000mAh

