Peasur Solar Security Lights Outdoor Motion Sensor (2 Pack) with Remote, 3 Modes and IP65 Wall Mount, 3 Adjustable Heads
Reviews
Price
Product description
If you want outdoor security lighting that’s fuss-free to fit, solar makes a lot of sense. This Peasur 2-pack is built around a motion sensor setup with three lighting modes, plus a remote control and three adjustable lamp heads.
The tricky bit with solar lights is always reliability in real conditions (sunlight during the day, weather at night, and how much light you genuinely need). With that in mind, it’s best viewed as practical perimeter lighting for entrances and walkways rather than something you’d expect to match hardwired floodlights in every situation.
At a glance
You’re getting a pair of solar wall lights designed to illuminate when movement is detected. Each unit uses a multi-head design intended to widen the light spread (a 270° wider lighting range is claimed), with three modes that switch between full brightness, dim lighting, and a long-light style.
On paper, the motion behaviour is simple: motion detection turns the lights on for around 30 seconds at full brightness, then they go back to the selected lower-power state. If you prefer energy saving, mode ① is described as the more energy-saving option.
The bundle also includes a wireless remote that can control the outdoor lights within 10m, which is handy if you don’t want to rely purely on the sensor.
What you’ll notice day to day
In everyday use, these lights are essentially for making an outdoor approach feel safer and easier to see. Think: stepping out at night to unlock the gate, noticing someone walking along the driveway, or getting a clearer view along a path up to the front door.
The adjustable 3-lamp-head design is meant to help you steer the light where it matters. Rather than blasting straight ahead, you can angle the heads to cover a wider entry area, which is often what people struggle with when a single light point is too directional.
One limitation to be aware of: if the area doesn’t get enough sun, solar flood lights can become less impressive over time. The product notes that you should place the solar panel where it can get around 6 hours of sunlight per day, so performance will depend quite a bit on your specific spot.
Key features that matter
The headline claims are strong for this kind of device: up to 1000 lumens of brightness is mentioned, and the lights are rated IP65 for waterproof and dustproof protection.
A few other details are worth calling out because they affect buying decisions:
- The built-in 1800mAh lithium battery is specified, and a conversion rate up to 22% is claimed.
- The expected runtime is described as up to 12 hours after about 6 hours of sunlight per day.
- Installation is designed to be wire-free. The description says no cumbersome wires or adapters are required, just mount using included accessories.
- The housing is ABS resin, with the brand referencing over 1000 waterproof tests.
If you’re comparing this to cheaper, basic solar PIR lights, the multi-head plus remote approach is a meaningful differentiator. If you’re comparing it to mains-powered security lighting, you may find it “good enough” for coverage but not as consistent.
Quick overview of the lighting modes
Three modes are provided:
- Mode ①: motion detection turns the light on at 100% brightness for about 30 seconds, then it turns off.
- Mode ②: dim mode (20% brightness). When motion is detected, it switches to 100% brightness for about 30 seconds, then returns to dim.
- Mode ③: long light mode at 20% brightness.
In practice, mode ② is often the compromise people end up using: you get a baseline glow for visibility, but still get a brighter burst when movement happens. Mode ③ can be useful if you want consistent low-level lighting, though it may feel less “security-focused” than full-bright motion activation.
Tech summary
Tech specs
- Type: Solar security wall light with motion sensor
- Lighting modes: 3
- Claimed brightness: 1000 lumens
- Lighting range claim: 270° wider lighting range
- Motion behaviour: turns on for about 30 seconds at 100% brightness
- Remote control range claim: up to 10m
- Weather protection: IP65 waterproof and dustproof
- Battery capacity: 1800mAh lithium battery
- Solar charging guidance: around 6 hours sunlight per day
- Claimed runtime: up to 12 hours
- Conversion rate claim: up to 22%
- Build material: high-strength ABS resin
Compatibility & requirements
These are described as outdoor wall-mount solar lights and are wireless (no power cables mentioned). The remote control is included and is intended to control the lights within 10m.
Do keep the placement guidance in mind: the product notes to avoid installing the solar panels near light sources or in strong reflective environments, as that may cause flickering at night.
What’s included and what to check before buying
The pack is a 2-pack of the Peasur solar security lights and it includes mounting screws.
Before you buy, it’s worth checking a few practical things:
- Your installation spot: will it realistically get around 6 hours of sunlight per day?
- Coverage needs: the description suggests it can illuminate around 20–30 square metres, but actual results can depend heavily on mounting height, angles of the adjustable heads, and local conditions.
- Control expectations: you’ll get remote control for convenience, but motion detection remains the main “security” function.
- Potential flicker risk: if nearby lights or reflective surfaces hit the solar panel, it could flicker.
If you’re after something strictly for constant illumination all night, you may find the long-light mode (20% brightness) doesn’t give the same level of brightness as a system that stays fully on.
Is it worth it?
It’s worth considering if you want a pair of solar-powered PIR wall lights that are designed to cover an outdoor approach (entrance, driveway, side path) with motion-activated brightness and a sensible dim/long-light option. The multi-head design and remote are the kind of details that make day-to-day use more flexible than ultra-basic solar sensors.
You may want to skip it if your outdoor area doesn’t get consistent daytime sunlight, or if you need extremely high, mains-like output throughout the whole night. Solar is always a compromise, and this one sounds firmly positioned for perimeter visibility and security cues rather than demanding full-on floodlighting.
Mini FAQ
How long do the lights stay on after motion? The description says they turn on for about 30 seconds at 100% brightness when motion is detected.
Can you control them without waiting for motion? Yes—there’s a wireless remote control, with a stated control range of up to 10m.
Are they suitable for rain and harsh weather? They’re rated IP65 for waterproof and dustproof protection, and the description mentions strong weather resistance.
Do I need power cables to install them? No power wiring is mentioned. The instructions describe wire-free mounting using the included accessories.
Why might they flicker at night? The product notes avoiding installation near light sources or strong reflective environments near the solar panel.