Nextbase Genuine 3M Series 2 Dash Cam Mount Pad Pack for 122, 222, 322GW, 422GW, 522GW, 222X & 622GW
Product description
If your Nextbase Series 2 Click&Go Pro mount has started to feel a bit loose, a fresh set of adhesive pads is often the simplest fix. This replacement pack is built to restore the sticky window-mount connection on compatible Series 2 mounts, using the “official” parts approach rather than improvising with generic adhesives.
The essentials
This is a Nextbase Genuine replacement sticky pad pack for Series 2 dash cam window mounts. The idea is straightforward: you replace the backing plates and 3M pads that bond to the windscreen, so the mount can sit firmly again when you attach your dash cam.
A key point here is compatibility. This pack is designed for the GPS and Non GPS Series 2 Click&Go Pro mounts, and it’s listed as suitable for Nextbase models including 122, 222, 322GW, 422GW, 522GW, 222X and 622GW. So it’s not a “universal adhesive solution” — it’s more of a maintenance item for owners of those specific setups.
It also comes with cleaning aids to help you apply the pads properly. On paper, that matters because even the best adhesive won’t behave consistently on a surface that isn’t clean.
Key points on what you’re actually buying
This bundle focuses on the windshield-side contact parts:
- 2 x dash cam mount backing plates with 3M pads attached
- 2 x wet wipes
- 2 x dry wipes
- 1 x cleaning cloth
No mount hardware or dash cam itself is included — it’s the replacement sticky interface only. If your goal is to replace the whole mount assembly, you’ll need to look elsewhere. But if the plate is already the right one and the pads are the problem, this is the kind of “small part” purchase that can bring things back to how the mount should feel.
There’s also a practical reassurance in the wording: it’s described as using strong 3M dash cam sticky pads intended to create a durable bond between the plate and windscreen glass.
What to know about installation
Installation is meant to be fairly painless, but you do need to follow the steps properly.
The process is described as: 1) Wipe the glass surface clean. 2) Peel off the adhesive pad backing. 3) Stick to a fully dry surface. 4) Press for a few seconds to start the bonding process.
Worth considering if you’re the sort of person who rushes installs: the “fully dry surface” bit is where mistakes tend to happen. If the windscreen area still has moisture or isn’t cleaned well, the adhesion may not hold as reliably as you’d hope.
Where it shines in day-to-day use
This is the sort of replacement you notice in use rather than on arrival. When the adhesive bond is doing its job, the mount stays put while you click the dash cam on and off as you normally would.
A common scenario: you’ve had the dash cam in place for a while, you clean your windscreen, and later you find the mount plate shifts slightly or feels less confident. Replacing the pads can be an easy “maintenance” route compared with living with a loose mount or buying a new mounting solution.
It may not solve issues caused by something else (like a mount component that’s already damaged), but if the problem is the sticky interface, this is clearly aimed at that.
Who it suits (and who should skip it)
It makes sense if: - you own a compatible Nextbase dash cam model from the list provided - you have a Series 2 GPS or Non GPS Click&Go Pro mount - the current sticky pads have worn, loosened, or you want to restore proper bonding - you prefer using the manufacturer-certified replacement parts route
It’s not the best fit if: - you need a complete mount replacement (the entry specifies mounts are not included) - your dash cam model or mount type isn’t part of the Series 2 GPS/Non GPS Click&Go Pro compatibility described - you’re looking for a one-size-fits-all adhesive pad solution for unrelated systems
Is it worth it?
If you’re trying to keep a Nextbase Series 2 mount working as intended, this pad pack is the pragmatic choice. It’s purpose-built replacement stock, includes cleaning materials to help the adhesive bond properly, and focuses on restoring the windshield-side connection using 3M pads.
You might want to skip it if you don’t actually need the pads (for example, if your issue is with a different part of the mount) or if your setup isn’t the Series 2 GPS/Non GPS Click&Go Pro style mentioned. In those cases, buying this pack could be a bit of a dead end.
Quick FAQ
Will this include the whole mount?
No. The pack is described as a replacement sticky pad set for the mounting interface, mounts are not included.
Do I need to clean the windscreen first?
Yes. The instructions specifically mention wiping the glass surface clean and applying to a fully dry surface.
Which dash cam models is it listed for?
It’s stated as compatible with Nextbase models 122, 222, 322GW, 422GW, 522GW, 222X and 622GW.
What’s inside the pack?
It includes two backing plates with 3M pads attached, plus wet wipes, dry wipes, and a cleaning cloth.