NEEWER 2" End Jaw Grip Clamp with 5/8" Stud (UA015) for C Stands and Tubular Supports

The essentials

This NEEWER end jaw grip clamp (UA015) is built for people who regularly mount LED video lights, softboxes, or small accessories to a C stand or other tubular support. Over the end, you get an adjustable jaw design with rubber pads for grip, plus a 5/8" stud to connect compatible light or accessory fittings. On paper, it’s the sort of clamp that makes setups feel less fiddly: you position, tighten the hand knob, and aim to keep everything stable without constant re-adjusting.

Where it sits in the market is pretty clear: it’s a practical mounting accessory rather than a “full lighting system”. If your priority is quick mounting, a secure hold on round or C-stand-style columns, and less risk of slipping or twisting during use, this is the direction it points to. It does rely on the right tube diameter and correct tightening, so it won’t magically fix poor stand condition or an incompatible setup.

Key features you’ll notice in use

The clamp uses a stainless steel shaft with an aluminium alloy jaw, which should help with everyday durability, especially in studio or kit-bag use. The adjustable jaws slide to accommodate different tube sizes, then lock down smoothly with an ergonomically designed hand-tighten knob. That “slide and lock” approach is simple enough for repeat setups—useful if you’re often moving between locations or changing lighting angles.

There’s also an anti-twist element. The main shaft includes a specially cut channel intended to prevent the jaws rotating while the clamp is in use. In addition, the grooves on the back of the clamp are designed to keep the jaws aligned as they open and close. If you’ve ever tightened a clamp and then watched an accessory slowly drift, this is exactly the kind of design choice that addresses that annoying problem.

Grip and protection: rubber pads matter

The end jaws include cross-pattern rubber pads. The point is straightforward: increased friction to help secure vertical or horizontal installation, reduce the chance of slipping, and protect the mounting surface from scratches. In real-world terms, this is the sort of detail that can save you from scuffing a stand column or dealing with a light creeping when you reposition the head.

It’s not perfect—rubber pads and friction still depend on how clean the stand surface is and how evenly the clamp sits. But for most standard studio handling, it’s a sensible addition rather than a gimmick.

What to check before you buy

Before committing, double-check compatibility with your support diameter and your accessory fitting.

• The clamp is intended to secure tubular supports up to 2.2"/5.5cm in diameter (hand tightened knob).
• The stud is 5/8", so your light fixture or accessory needs to work with that stud format.

It’s also worth thinking about how you’ll mount it. If you’re setting up horizontally, vertically, or repeatedly adjusting during a shoot, the anti-twist and rubber padding approach should be more valuable than it would be on a fixed, rarely touched setup.

Who it’s for (and who should look elsewhere)

This is a solid pick if you want a sturdier, purpose-built grip clamp for common video lighting setups on stands or tubular supports. It suits creators and studios that regularly attach LED lights or similar accessories and want a cleaner, more reliable connection than improvised adapters.

It might not be the best choice if you need a clamp for a tube diameter outside the stated range, or if your lighting/accessory uses a different connection type than a 5/8" stud. It also may feel overkill if you only mount something once in a while and are after the cheapest possible solution.

Final verdict

It makes sense if you’re building a reliable kit for LED video lights on C stands or other tubular supports, and you want a clamp that tightens quickly, grips with rubber pads, and resists twisting while you work. The design choices (anti-twist channel, aligned grooves, non-slip pads) are the kind of details that can reduce small frustrations over time.

You may want to skip it if your support diameter doesn’t fall within the stated limit or your accessory doesn’t match the 5/8" stud. In those cases, you’ll be better off looking for a clamp that matches your mounting format from the start rather than trying to force compatibility.

FAQ

Is it quick to mount?

Yes. The adjustable jaws are designed to slide to the right tube size and then lock in place using the hand tighten knob.

Does it help prevent the light from twisting?

The clamp includes an anti-twist channel intended to prevent jaw rotation during usage.

Will it scratch a stand?

The end jaws have cross-pattern rubber pads designed to protect the mounting surface from scratches and improve grip.

What tube size is it meant for?

It’s intended for tubular supports up to 2.2"/5.5cm in diameter, based on the clamp’s stated range.

What fitting does the stud use?

It has a 5/8" stud, so your light or accessory needs to be compatible with that stud format.