NEEWER DS023 45.5" Overhead Camera Desk Stand with 4-Section Magic Mic Boom Arm
Product description
The essentials
If you’re setting up a desk for overhead shots, this NEEWER DS023 is built around one simple idea: get your camera (or phone) above the work surface and lock it into position without feeling fiddly. It’s an aluminium overhead desk stand with a clamp mount, designed for content creation setups such as Zoom video calls, livestreams, podcasts, and table-top filming.
On paper, it’s the kind of stand that suits people who want repeatable overhead angles—think filming craft sessions, desk-style tutorials, product demos, or recording straight-down “flat lay” style footage. The arm is flexible in reach and angle, and the included mounting head and phone holder mean you’re not starting from scratch.
That said, it’s not a universal solution for heavy rigs. It’s rated for a maximum load of 4.41lb (2kg), so if you plan to mount a heavier camera system or multiple accessories at once, you’ll want to stay within that limit.
What it’s designed for
The DS023 combines an overhead camera desk stand with an adjustable boom arm profile. The key benefit is height and angle control: the arm folds at two points and extends up to 115 cm, letting you position your device for overhead tabletop views “from any perspective”. In everyday terms, you can raise the camera to avoid blocking the subject, then fine-tune the angle so the top-down shot looks intentional rather than accidental.
The arm is described as having 2 foldable joints and 2 telescopic sections, creating 4 segments in total. That matters because more segments usually translate to more practical positioning on a busy desk—especially if you’re trying to keep cables clear and avoid awkward reach when adjusting.
For audio, it’s also framed as a low-profile mic boom arm with a strong grip. So if you’re building a compact streaming or podcast station, it can cover both camera placement and mic positioning rather than forcing you to buy separate arms.
Key features that affect day-to-day use
This is where the DS023 feels most considered.
The build is aluminium alloy with a black anodised finish, aimed at durability. If you’re moving the setup around or adjusting multiple times a week, that matters more than “pretty” finishes. Stability is supported by the joints between the arms and a clamp mechanism secured by a tightening knob.
The clamp is a Super C style clamp, designed to mount to a desk surface (the instructions note it can clamp to desks up to 5 cm thick). For quick setup, the arm comes assembled and ready to use, so you’re mainly assembling the clamp, attaching the arm, and then mounting your device.
Positioning is handled with rotating knobs that allow fast adjustments and then a secure lock once you’ve dialled in the angle.
One thing to keep in mind: overhead stands can be brilliant for top-down framing, but they’re also easier to bump than a fixed wall mount if your filming area is busy. If you tend to move equipment frequently, take a moment to tighten everything properly before you start recording.
Compatibility and mounting options
This stand includes a ball head with a 1/4-inch screw and a phone holder. That opens up the most common mounting paths for creators: you can attach cameras using the 1/4-inch screw, or you can secure a smartphone in the included phone mount.
The base description also lists a range of compatible action camera adapters and action camera models, plus a note about DJI Osmo Pocket compatibility. It also references webcam/LED light/microphone/tablet bracket style accessories as part of the intended setup.
For phones, the listing names a number of specific models and brands, and it’s broadly described as fitting most smartphones. What’s sensible to do before buying is compare your phone’s size to the phone holder’s practical fit range—because “most phones” can still leave edge cases depending on thickness and case design.
Tech specs (only the bits you really need)
- Name: NEEWER DS023
- Type: Overhead camera desk stand with adjustable boom arm and C clamp mount
- Material: Aluminium alloy (black anodised finish)
- Sections: 4 segments (2 foldable joints + 2 telescopic sections)
- Max extension: Up to 115 cm
- Max load: 4.41lb (2kg)
- Clamp mount: C clamp for desks up to 5 cm thick
- Mounting interface: 1/4-inch screw with ball head
Where it shines (and where it may not)
It’s a solid pick if you want overhead desk content and you value a setup that can be adjusted quickly—height up, angle dialled in, then locked. It’s also a good fit if you’re mixing tasks: webcam/phone filming one minute, then microphone positioning the next.
It may not be a great match if you’re planning on mounting a setup that comes close to the 2 kg ceiling, or if you need a more rigid, heavy-duty solution for larger camera rigs. Overhead setups are sensitive to load and balance, staying comfortably under the stated max load is the safer route.
It also depends on your desk space. Overhead arms work best when you have enough room for the extended reach and when the clamp can be secured firmly.
Buying verdict
Final verdict
It’s worth considering the NEEWER DS023 if your priority is table-top overhead filming (phone or camera) with a clamp mount you can set up quickly and adjust reliably. The aluminium construction, 115 cm reach, and 1/4-inch mounting with a phone holder make it practical for everyday creator workflows like Zoom calls, livestreams, and desk demos.
You may want to skip it if your device setup is heavy or unusually balanced, or if you don’t have desk clearance for an overhead arm that extends to the full length. If you tend to bump your desk area mid-recording, make sure you tighten the clamp and locking knobs properly before you hit record.
If you’re building a desk kit from the ground up and want one stand to cover both overhead camera placement and mic-style positioning, this is the kind of one-arm solution that can simplify the setup. If you’re after something ultra-lightweight or permanently fixed to one spot, then an alternative mounting approach might suit you better.
Mini FAQ
Can I use it with a smartphone?
Yes. The kit includes a phone holder designed to mount most smartphones, and the description lists compatibility for a range of iPhone and Samsung models.
Does it support cameras with a 1/4-inch screw?
It includes a ball head with a 1/4-inch screw, so it’s set up for common camera mounting methods using that interface.
What desk thickness does the clamp handle?
The clamp is intended for desks up to 5 cm thick.
What’s the max weight it’s rated for?
The stated maximum load is 4.41lb (2kg). If your setup is near that figure, it’s sensible to be cautious.
How far does the arm extend?
It extends up to 115 cm and can be folded at two points for a more compact storage/adjustment footprint.