HSU Grab Bag Basic Camera Mount Kit (14-IN-1) for GoPro – quick release buckle mount, extension arms and 1/4 adapter

What it is and why people buy it

The HSU Grab Bag Basic Camera Mount Kit is essentially a multi-use mounting “grab bag” aimed at expanding what you can do with your action camera setup. If you’re the sort of person who swaps between activities or rigs on the fly (mounting options on bikes, helmets, boards, tripods and selfie sticks), a bundle like this can be a practical way to avoid being stuck with just one mounting style.

On paper, the appeal is the variety: it’s described as a 14-in-1 kit covering quick-release buckle mounting, tripod attachment options, extension arms for different positions, and a 1/4 inch camera adapter. There’s also mention that some clips can be used as spares or replacements for your existing GoPro accessories, which is handy if you’ve ever lost a small part at the worst possible time.

The mounting ideas you actually get

This kit focuses on versatility more than specialism. Instead of one fixed mount, you get a range of components that let you position the camera where it makes sense for the sport or shot.

Included pieces (as listed) include a quick release clip, a J-hook clip, a tripod mount, a 1/4 mount, and a quick release tripod mount. You also get several extension arms in different lengths/directions (including both “same direction” and “different direction” types), plus long thumbscrews (with a small wrench/key also included). In everyday terms, that means you can build a rig for a chest/helmet-style viewpoint, extend the camera out for clearer angles, or set it up for steadier filming on a tripod.

There’s also a note that the camera clips include a rubber lock insert intended to help prevent accidental release of the quick release buckle. That’s a small detail, but it matters if you’re out doing fast, bumpy sessions where vibration is constant.

Key points to know before you buy

A bundle of mounts can save money versus buying single-purpose accessories, but it only works if it matches your expectations.

• You’re paying for options and adaptability. If you already own a complete, well-fitting system, this may end up being more “spare parts and extras” than a true upgrade.
• Check what you’re planning to mount to. The kit is described as suitable with adhesive sticky mounts and different strap/gear mounts (chest, head strap, backpack, helmet, handlebar), plus tripod and selfie stick use. If your setup relies on a very specific mounting interface not mentioned here, you may need additional parts.
• It’s not a replacement for your whole rig. This is a mount/accessory kit. It won’t solve every filming need on its own, especially if you’re missing the other parts that hold your camera system together.

And one limitation to consider: because we only have the listed kit contents and intended use from the product description (not detailed compatibility specifics), it’s worth double-checking that your existing GoPro housing and mounting ecosystem will pair up neatly with the 1/4 adapter approach and the quick-release clips you plan to use.

What stands out in use

Where this kit can feel worthwhile is when your “shooting position” changes throughout the day. For example, you might start with a wider action angle on a bike/handlebar style setup, then switch to something more stable on a tripod for a calmer segment, and later extend the camera position with one of the curved or straight extension arms.

The rubber lock insert on the clips is designed to reduce accidental release, and the kit is also described as tightening the fit to help reduce vibrations. In practice, that’s the difference between a mount that stays put versus one that constantly needs checking when conditions get rough.

Who it suits (and who should skip it)

It makes sense if you want a go-anywhere mounting collection: action sports, outdoor sessions, and anything where you’d rather have the ability to reposition the camera than buy a new mount every time.

It may not suit you if: - you only ever film from one fixed position and don’t need extra arms/clips - you’re expecting a fully engineered, camera-specific solution beyond what’s described (this is a basic grab-bag approach) - you want guaranteed fit with a niche mounting system not covered by the stated adhesive/strap/helmet/handlebar/tripod/selfie stick use cases

If you tend to keep spare parts around too, the “replacement/spare” angle makes the kit more compelling—particularly for small components like clips and screws that are easy to misplace.

Care & handling notes

Because the kit uses plastic components for adapters and stainless steel screws (as described), it’s generally the kind of accessory set that you’ll want to keep clean and dry after use. Pay attention to the quick-release clips and thumbscrews: if grit gets into the contact points, you might notice the fit feeling looser over time.

When it makes sense

If you’re building a flexible GoPro-style mount setup, this 14-IN-1 HSU grab bag is the sort of add-on that can justify itself through sheer convenience: different clip types, quick-release options, multiple extension arms, and a 1/4 inch adapter in one bundle.

On the other hand, if your current mounts already cover your needs perfectly, you might not gain much beyond spares. In that case, it could be more economical to prioritise the one mounting style you’re missing rather than collecting options.

Final verdict

Worth considering if you want a versatile grab bag of mounts and extension arms for action camera filming across different settings, and you like the idea of having spare parts ready. It’s less convincing if you only need one mount solution, or if your existing rig relies on compatibility details not reflected in the stated adhesive/strap/helmet/handlebar/tripod/selfie stick use cases.

Mini FAQ

What does “14-IN-1” mean here?

It refers to the variety of mounting components listed in the pack contents, including different clip types, tripod mounts, a 1/4 adapter, extension arms, and thumbscrews.

Can these mounts be used as replacements?

The description states you could use the camera mounts as spare/replacement parts for your existing GoPro accessories.

Does the kit help with vibration?

The clips are described as designed to tighten the fit and reduce vibrations, and they include a rubber lock insert intended to help prevent accidental release.

Are there tripod options in the kit?

Yes. The pack includes a tripod mount as well as a quick release tripod mount, plus a 1/4 mount option.

What should I double-check before buying?

Double-check that the mounts you plan to use align with your existing setup (especially where the 1/4 inch adapter and quick-release clips are involved), and that your intended attachment points match the stated adhesive/strap/helmet/handlebar/tripod/selfie stick use cases.