Maxhood 1.5ft Speakon Splitter Cable — 22 AWG, 1 Female to 2 Male
Product description
What to know
The Maxhood Speakon Splitter Cable is designed to split a single amplifier channel into two speaker cabinets. It uses a 2 pole configuration wired to 1+ and 1−, with 2+ and 2− left unused, which is a common setup for distributing power to multiple loudspeakers. Length is 50 cm (1.5 ft), making it a practical length for stage wiring or a small rig.
Technical details
This is a Speakon extension cable built with 22 AWG soft silicone rubber insulation and 0.6 mm² copper conductors. The housing is robust plastic, and the connectors feature a locking mechanism and touch-proof contacts, which helps with reliable connections in live or high-current environments. The cable outer diameter is about 8.0 mm, suitable for tight stages or rack layouts. It is rated to carry high current, with a stated current rating up to 30 A rms.
How it works in use
End connections are separated into a Speakon male and a Speakon female, with the female end incorporating a spring-loaded lock release, sometimes referred to as a “Quick Lock” twist-lock system. This design aims to minimise accidental disconnections and is helpful when routing cables on busy stages or in houses of worship, clubs, or venues where quick changes are routine.
What stands out day to day
On the positive side, it provides a straightforward way to drive multiple cabinets from a single amplifier channel, which can simplify a compact rig or stage monitor setup. The 1.5 ft length reduces clutter while still offering enough reach for some layouts. The locking connectors contribute to a more secure connection during movement or belt-packing tours.
Limitations and considerations
It’s important to note that only pins 1+ and 1− are used, if you need to feed two independent outputs, this splitter won’t provide separate channels for 2+ and 2−. The 22 AWG conductors, while common in many professional cables, are not the heaviest gauge you’ll see on high-power main runs, so if you’re pushing very long runs or exceptionally high SPLs, you might want to verify current requirements and safety margins for your specific setup.
Who it’s for
This splitter is well suited for small to mid-size configurations where a single amplifier channel needs to drive multiple speaker cabinets, such as stage monitors, small PA mains, or a compact house sub-woofer arrangement in controlled environments.
Who it isn’t for
If your setup requires live, independent feeds from a single amplifier channel to each cabinet, or if you routinely run high-current loads over longer distances, this 1-in-2-out splitter may not be the best fit. It’s also not a classroom-grade replacement for more robust multi-cabinet deployments where cabling is run across longer spans.
Before you buy
Check that your amplifier and cabinets are compatible with Speakon connections and that your current draw stays within the 30 A rms rating. Consider your stage layout to ensure the 50 cm length satisfies your routing needs and avoids undue tension on the connectors.
Practical use example
Imagine you’re setting up a small venue with one amplifier feeding two stage monitors. Using this splitter, you can run a clean, locked connection to both monitors from the same channel, keeping cabling organised enough for quick on-the-fly changes while keeping noise and buzz to a minimum.
FAQ
- What does the “1+ and 1− wired, 2+ and 2− empty” mean for my setup? It means the splitter takes one channel's positive and negative for distribution to two cabinets, without using a second pair, which is common for simplifying routing.
- Is 30 A rms sufficient for stage use? For many standard loudspeaker applications, 30 A rms is a typical high-current level, but you should verify your cabinet’s current requirements and lead lengths in practice.
- Can I use this with any Speakon-compatible gear? Yes, provided the gear uses the standard 2‑pole Speakon connections and the current and impedance meet your system’s needs.
Final thought
If your rig benefits from a compact, secure, two-in-one speaker feed on a single channel and your current demands align with the stated specs, this Maxhood splitter offers a sensible, low-frustration option. It may not be the best choice for very long runs or high-demand, multi-cabinet systems, but it fills a common, practical niche in smaller or portable setups.