Linkind Dimmable E27 LED Screw Bulb 7.3W (60W) A60 Edison Screw, Warm White 2700K, 806lm – Pack of 3

What it is and why you’d want it

This Linkind dimmable E27 LED screw bulb is aimed at replacing older Edison-screw bulbs with something more energy-conscious, while keeping the look and fitting style you’re used to. On paper it’s a straightforward swap: 7.3W is claimed to be equivalent to a 60W bulb, and you get 806 lumens with a warm white 2700K colour temperature.

The selling point here isn’t flashy—it's the combination of warm, soft light and dimming control. If you’re setting up lounge lighting or want to tune brightness across the day (rather than having the lights behave like a single on/off switch), a dimmable bulb is often the difference you’ll actually notice.

The essentials (lighting feel and control)

You’re looking at “soft warm white” with a 2700K output and 806 lumens. That typically suits rooms where you don’t want harsh, daylight-style illumination—think living rooms, bedrooms, or any indoor space where a warmer ambience matters.

Dimming is specified as smooth between 5% and 100%. So, if your current dimmer system can handle LED loads, this design is intended to be usable without the common problems people complain about (flicker, buzzing, and unpleasant behaviour when you lower brightness). The manufacturer also mentions a 220 degree beam angle, which is useful for spreading light more broadly from a standard A60 bulb shape.

A quick reality check though: the text specifically warns it is not compatible with 3-way dimmable touch lamps. If your setup uses that kind of touch/3-way control, this is the kind of detail that can save you from frustration later.

Key features that matter in everyday use

Where this bulb makes sense is in day-to-day reliability and “cost to run” thinking.

• Energy saving claim: 7.3W is positioned as an energy saver versus the 60W equivalent, with the statement that it can save up to 90% energy.
• Long life claim: it’s stated to last for up to 25,000 hours.
• Colour rendering: CRI80+ is listed, which generally points towards more natural-looking colours compared with very basic LEDs—especially when you’re relying on warm tones.
• No buzzing / no humming / no flickering: these are explicitly claimed, which is exactly what most people hope to avoid when switching to dimmable LED.

There’s also a “fit and forget” aspect: E27 standard medium screw base is designed for easy installation in compatible fittings.

Tech specs

• Name: Linkind Dimmable E27 Screw Bulb
• Type: E27 LED light bulb (Edison screw)
• Format: A60 standard light bulb shape
• Size: A60
• Power: 7.3W
• Equivalent: 60W
• Lumens: 806lm
• Colour temperature: 2700K (warm white)
• Dimming range: 5%–100%
• Beam angle: 220 degree
• CRI: CRI80+
• Energy class rating: A+ (stated, with note that the current label scheme uses ‘F’)
• Certifications: ERP, RoHS, CE
• Claimed lifetime: 25,000 hours

Where it shines (and where it may fall short)

This is most compelling if you want a warm, soft light for indoor living and you also need dimming to be usable across low-to-full brightness. On a practical level, imagine replacing a warm bedside lamp bulb: you’d aim for that 2700K glow, then dim it down in the evening for a calmer feel. Because the dimming spec goes down to 5%, you should be able to find a comfortable level rather than only running it near full brightness.

That said, it’s not perfect for every situation. The clear limitation is compatibility with the wrong kind of controls—specifically, it’s not compatible with 3-way dimmable touch lamps. If your lighting relies on that feature set, you may need an alternative bulb type or a different approach to avoid flicker or control issues.

Also, the “60W equivalent” positioning suggests a mid-range brightness replacement, not a lighting system upgrade. If you’re trying to dramatically increase brightness, you may find it more about matching your current feel than overpowering the room.

Compatibility and requirements

This bulb uses a standard E27 screw base, so it should be suitable for fittings that accept that bulb type.

For dimming, it’s described as compatible with most dimmers on the market, but the warning matters: it is not compatible with 3-way dimmable touch lamps. If you’re unsure what type of dimmer or touch control you have, it’s worth checking before you buy to avoid compatibility headaches.

Mini FAQ

Is it suitable for warm, soft lighting?

It’s specified as 2700K warm white, and the output is 806 lumens. That combination is typically chosen for softer ambience rather than bright, cool task lighting.

Does it dim smoothly?

The dimming range is stated as 5% to 100%, with a note intended to help avoid flicker. Just remember the touch lamp compatibility warning.

What’s the brightness compared to older bulbs?

It’s marketed as 7.3W equivalent to 60W, with 806lm output. That’s the reference point you should use when comparing to your existing bulb.

How long is it expected to last?

The lifetime claim given is up to 25,000 hours.

Is it worth it?

Worth buying it if you want an E27 Edison screw LED bulb with warm 2700K light, dimmable control from 5%, and you’re replacing older bulbs to reduce running costs on a like-for-like basis. The “no buzzing/no humming/no flickering” claims also make it a reasonable pick if you’ve had LED dimming issues before.

You may want to skip it if your lighting uses 3-way dimmable touch lamps, because this bulb is explicitly stated as not compatible. It might not be a great match either if you’re aiming for a big brightness jump rather than a 60W-equivalent feel.

For most people buying this kind of bulb, it’s a sensible value-for-money option—just double-check the dimming control type in your home before installing, and you’ll likely end up with the kind of warm, controllable lighting it’s designed for.