JJC Classic Square Metal Lens Hood with 49mm Adapter Ring for Fujifilm X100VI / X100V / X100F (Black)

If you’re shooting with a Fujifilm X100-series camera, stray light can be the quiet spoiler—washed contrast, flare at the wrong angle, and the occasional finger-on-the-lens moment. A square metal lens hood is a simple fix that also looks like it belongs on the camera, and this JJC set is aimed squarely at that job.

The essentials

This JJC Classic square lens hood comes as a kit: the metal square hood, a lens cap, and a 49mm adapter ring. The design is described as classic for Fujifilm X100 cameras, and the interior is finished in matte to help reduce or eliminate lens flare by cutting down reflected light.

It’s primarily for practical shooting. By extending the front of the lens, the hood blocks unwanted stray light before it can reach the sensor. That same extension can also offer a bit of physical protection—handy in everyday use when your camera lives in a bag, gets grabbed quickly for a photo, or spends time in mixed outdoor light.

It’s also built around filter use. The set is described as compatible with a 49mm UV filter, which can matter if you already use filters for protection or workflow.

You should also know the fit point: this is a newer version made for Fujifilm X100VI, X100V, and X100F, and it’s stated to replace the Fujifilm LH-X100 lens hood.

What stands out in use

The square silhouette is the obvious visual difference, but it’s the matte interior that does the useful work. On bright days, or when you’re shooting at awkward angles to the sun, a hood can be the difference between “good enough” and “where’s the contrast gone?”. In practice, it’s the sort of accessory you notice most when the light gets tricky—backlit streets, late afternoon glare, or window reflections.

There’s also the small-but-real convenience of having a lens cap included. If you’ve ever tried to keep a hood clean and then still managed to get a smudge on the front element, you’ll appreciate having something purpose-made in the same set.

One limitation to keep in mind: the entry is about flare reduction and stray-light blocking, not about making the camera weatherproof or solving every lighting problem. In very harsh conditions, you’ll still benefit from careful positioning and shielding with your hands when needed.

Tech specs

• Type: Square lens hood with lens cap and 49mm adapter ring
• Material: Aluminium alloy metal
• Colour: Black
• Compatibility: Fujifilm X100VI / X100V / X100F
• Adapter ring size: 49mm
• Purpose: Helps prevent unwanted stray light entering the lens, reduces lens flare
• Includes: Lens Hood ×1, Lens Cap ×1, 49mm adapter ring ×1

Who it suits (and who should skip it)

It’s a sensible pick if you want a straightforward hood setup that matches the look of the Fujifilm X100 line, and you also care about reducing flare in real-world scenes. It’s also a good fit if you’re already thinking in terms of 49mm filtration (UV filters, for example) and want the hood to support that.

It may not suit you if you only ever shoot in evenly lit interiors, or if you dislike adding any extra length to the front of the lens. Also consider skipping it if you frequently shoot very close compositions where the hood could get in the way of your framing—depends quite a bit on how you shoot.

Getting the most from it

For day-to-day use, a typical moment looks like this: you’re outdoors near a low sun, composing quickly for street shots. The hood helps you keep glare from creeping in from the side, and the matte interior reduces internal reflections. When you’re done, the included cap makes it easier to store the camera without worrying as much about dust and smears on the front.

Before buying, it’s worth double-checking two things: you’re matching the listed Fujifilm models (X100VI / X100V / X100F), and you’re actually planning to use the 49mm filter mount angle of the kit. If you don’t use filters at all, you might still like the hood benefits—but the adapter ring value is then mostly about getting the right setup for the hood itself.

Is it worth it?

This JJC Classic Square Metal Lens Hood is worth considering if you want a flare-reducing, classic-looking hood for a Fujifilm X100VI/X100V/X100F, and you like the idea of a matte interior plus a included cap. It’s the kind of practical accessory that tends to pay off most when the light is bright, directional, or reflective.

Better avoided if you never deal with stray light, need the tightest possible framing at close distances, or want a solution that’s more than basic flare control and physical protection. On balance, it sits in the “useful everyday upgrade” category rather than being a complicated or specialised tool.