SmallRig Adjustable Monitor Mount for DJI Ronin & ZHIYUN Crane & MOZA AirCross gimbals (2889)

What it is and what it solves

SmallRig’s adjustable monitor mount (model 2889) is a practical way to add a monitor to a portable gimbal setup. If you’re doing longer takes, run-and-gun shoots, or work where you’d rather see framing clearly than squint at a small screen, this mount is designed to hold a monitor securely on the gimbal so you can keep your focus on the move.

On paper, the appeal is the combination of adjustability (so you can aim the monitor where you actually look), solid protection (a rubber pad to help prevent scuffs), and a weight limit for the monitor platform (up to 1 kg). It’s also built around a straightforward mounting approach, using the gimbal’s existing mounting threads and a supplied adapter plate where needed.

Key features that matter in day-to-day use

This mount is built for flexibility during shoots. It offers a 360° tilt range and can stop in any position, which is useful when you’re switching between low-angle and eye-level viewing, or when you want the monitor to sit neatly out of the way while walking.

It also includes a rubber pad where your monitor rests, which is a small detail but the kind that can save you from scratches over time. The mount’s tightening system uses wing screws with slots designed so an Allen key can tighten the mounting screws properly.

There are also three 1/4”-20 threads provided for additional accessories. That’s handy if you’re trying to build a more complete on-gimbal setup (for example, mounting small extras), as long as your planned accessories fit that thread type.

One limitation to keep in mind: the platform is rated to hold a monitor up to 1 kg. If your monitor is heavier than that, you shouldn’t expect this mount to be the right solution.

Compatibility overview (and where people can get stuck)

The monitor mount 2889 is described as compatible with a range of portable gimbals, including: - DJI RONIN-S / RONIN-SC / RS2 / RSC2 - ZHIYUN CRANE 2S / CRANE 3 / 3S / WEEBILL-S - MOZA AirCross 2

The way it mounts varies by system, and that’s the part worth checking before you buy. For example, it’s secured using an included wing screw to the mounting threads on ZHIYUN CRANE 3/3S/ WEEBILL-S / WEEBILL LAB, while a rosette adapter plate is used for DJI RONIN-S / RONIN-SC with two M4 screws included.

For RS2 and RSC2, the instruction guidance points to fixing the rosette connector plate to the built-in NATO rail using the two M4 screws.

If you’ve never mounted accessories on these gimbals before, don’t assume every platform uses the same interface—the “included adapter plate” detail suggests there’s a bit of setup involved depending on your exact model.

Pros and limitations (the honest bit)

What you’ll likely like

• Adjustable monitor positioning: 360° adjustability that can stop at any angle helps with practical viewing.
• Monitor protection: the rubber pad is there to reduce the chance of scratches.
• Add-on flexibility: three 1/4”-20 threads let you attach accessories.
• Gimbal-focused mounting approach: included screws/adapters are tailored to different gimbal mounting methods.

What to watch

• Weight limit applies: the mount platform is for monitors up to 1 kg, so heavier screens may not be suitable.
• Installation method depends on your gimbal: the included adapter plate and the described fixing points (mounting threads vs rosette vs NATO rail) mean you should read your gimbal’s mounting layout carefully.

Quick practical example: setting up for a walking shot

Imagine you’re shooting a vlog while walking and you want the monitor angled so you can glance at it without twisting your body. You’d typically loosen the adjustment, set the monitor to an angle that lines up with your head position, then tighten it down so it holds that view. During the next segment—maybe you tilt the camera for a low angle—being able to stop at a specific position within the 360° range makes it easier to reposition quickly without fiddling endlessly.

Tech specs

• Type: Adjustable monitor mount for portable gimbals
• Compatibility: DJI RONIN-S / RONIN-SC / RS2 / RSC2, ZHIYUN CRANE 2S / CRANE 3 / 3S / WEEBILL-S, MOZA AirCross 2
• Adjustability: 360° with stopping at any position
• Maximum monitor platform load: up to 1 kg (2.2 lb)
• Protection: rubber pad to help protect against scratches
• Accessory threads: three 1/4”-20 threads
• Included hardware/parts (as described): rosette adapter plate for DJI RONIN-S / RONIN-SC (two M4 screws included), wing screw, mounting method uses built-in NATO rail with two M4 screws for RS2/RSC2

In the box (based on the details provided)

From the information given, you should expect the mount itself, a wing screw for certain mounting threads, and a rosette adapter plate for DJI RONIN-S/RONIN-SC. The description also mentions M4 screws are included for the DJI adapter and for the NATO rail connection on RS2/RSC2.

Is it worth it?

It makes sense to buy the SmallRig 2889 if you’re running a compatible gimbal and want a monitor setup that’s genuinely adjustable in use, rather than stuck in one viewing angle. The rubber pad and the clearly stated load limit also make it feel like a mount built for real shooting rather than just a desktop accessory.

You may want to skip it if your monitor is likely to exceed the 1 kg rating, or if you’re not willing to do a bit of checking on how your exact gimbal model accepts accessories (because the mounting method differs between ZHIYUN and DJI RS/RSC setups).

It suits filmmakers and content creators who regularly shoot with portable stabilisers and prefer external monitoring for framing, especially when you need to move quickly and adjust the screen angle on the fly.

Final note for buyers

Before purchasing, double-check your specific gimbal model against the listed compatibility and read the part about the fixing points. The description implies different attachment routes depending on whether your setup uses standard mounting threads, an included rosette adapter, or an integrated NATO rail—small details like that can make the difference between “it fits easily” and “why doesn’t it line up?”.

FAQ

What is this monitor mount designed for?

It’s designed to attach a monitor to compatible portable gimbals, giving you adjustable external viewing during shoots.

How far can you adjust the monitor angle?

It’s adjustable through 360° and can stop at any position.

Does it protect the monitor from scratches?

Yes, it includes a rubber pad where the monitor rests to help reduce scratch risk.

What accessories can mount to it?

It has three 1/4”-20 threads for accessories, such as compatible SMALLRIG options mentioned in the description.

What’s the maximum monitor weight it can hold?

The mount is specified as able to support a monitor platform up to 1 kg (2.2 lb).