HPMAISON 10PCS Masonry Drill Bits set (carbide-tipped) for concrete, tile, glass and more

The essentials

If you regularly find yourself drilling into mixed surfaces at home, a small set like this carbide-tipped masonry drill bit collection can be genuinely handy. It’s aimed at tackling materials such as concrete wall, brick wall, ceramic tile and glass (where appropriate), with a variety of bit diameters in the same pack. Having multiple sizes together usually saves time compared with buying single bits one by one.

On paper, the value here comes from the combination of carbide tips, a rust-resistant treatment and a cross-angled, four-edged head design that’s meant to help reduce slipping and walking on harder, smoother surfaces like tiles. It’s not pitched as a specialist glass-only kit, though—so if your job demands extremely controlled hole cutting in fragile glass, you may still want to think carefully about technique and bit choice.

What matters most for real-world drilling

The standout design idea is the cross angle, four-edged tip. In everyday use, that’s the kind of detail that can make a difference when starting a hole on glazed tile or other hard, slick materials. Instead of the bit wandering, the angled geometry is designed to encourage more direct cutting, which should help you get cleaner entry and potentially reduce chipping.

Another practical point is the anti-rust treatment and the carbide-tipped construction. Carbide tips generally hold up better against masonry and abrasive dust than basic HSS-style bits, so this set makes sense if you’re not just drilling plasterboard or soft timber.

Key sizes and where they tend to fit

This 10-piece set includes 5mm (2pcs), 6mm (4pcs), 8mm (2pcs), 10mm (1pc) and 12mm (1pc). That spread covers a lot of common DIY needs: smaller holes for fixtures and fittings, and larger diameters when you need room for certain anchors or thicker-wall work.

It’s also worth noting that most people rarely use every size equally—so the fact you get duplicates of 5mm and especially 6mm suggests the pack is built around frequent, day-to-day drilling rather than one-off precision.

Tech specs

• Material: Carbide tipped YG6X alloy
• Tip design: Cross angle four edged design
• Rust protection: Anti-rust treatment
• Shank: 1/4" Hex Shank for quick change
• Sizes included: 5mm (2pcs), 6mm (4pcs), 8mm (2pcs), 10mm (1pc), 12mm (1pc)

What you’ll notice day to day (pros and limits)

Strengths you can expect for the type of kit - Carbide tips with a YG6X alloy build, intended for harder materials like concrete and brick. - Cross-angled four-edged head designed to reduce skating/walking and help with neater cutting on tiles. - Anti-rust treatment that’s useful when bits get stored in typical garage/tool drawer conditions. - Quick-change 1/4" hex shank intended to clamp more firmly and fit more easily in many tool setups.

A couple of cautions (so you’re not caught out) - Although it lists glass and ceramic tile, drilling into glass and mirrors is very technique-dependent, going in too fast or without the right handling can still lead to cracking. The bit design helps reduce wandering, but it can’t remove the need for care. - This is a general-purpose mixed-material set. If your work is mostly one specific material (for example, thick masonry only), you may eventually want a more specialised drilling approach rather than relying on a compact multi-size kit.

Usage tips

A simple way to get better results with these bits is to focus on starting control. For tiles and smooth surfaces, begin with gentle pressure so the cross-angled tip can ‘bite’ instead of forcing it. Once the hole has started, you can maintain steadier cutting.

For a micro example: say you’re fitting a wall mirror or hanging bracket on a tiled section. You’d typically pick a smaller diameter from the set, line up the entry point carefully, start drilling slowly to prevent the bit from skidding, and then keep the feed consistent as you progress through the tile and into the tougher wall material.

Also, because the set claims compatibility with common quick-change chucks and general brand tools, it’s worth checking your own chuck system before you assume it will mount exactly as you expect.

Should you buy it?

Worth considering if you want one multi-size set of carbide masonry drill bits for common DIY jobs—especially when your projects involve a mix of surfaces like ceramic tile, brick wall, concrete, and occasional work around glass, mirrors, or similar materials.

You may want to skip it if your job is highly specialised (for instance, delicate precision glass work where you’re chasing ultra-controlled results and you already know you need a dedicated glass approach). Also, if you’re drilling only soft materials, a carbide masonry set can be more than you need.

It makes sense for typical household use: repairs, fixtures, and mounting tasks where having 5mm/6mm most of all—and then 8mm/10mm/12mm when needed—reduces repeat purchases.

FAQ

How many drill bits are included?

The set includes 10 masonry drill bits in total.

What sizes do you get?

You get 5mm (2 pieces), 6mm (4 pieces), 8mm (2 pieces), 10mm (1 piece) and 12mm (1 piece).

Is it suitable for concrete and brick?

Yes, it’s described for drilling into materials including concrete wall and brick wall, using carbide-tipped YG6X alloy bits.

Does it work with quick-change chucks?

It’s described as having a 1/4" hex shank for quick change, intended to help with firmer clamping and easier fit in power tools with compatible chucks.

Is it safe for glass and mirrors?

It’s listed as suitable for drilling glass and mirrors, but drilling these materials depends heavily on technique and handling, so take care when starting the hole and maintain appropriate control.