Bosch Professional 25-piece PointTeQ HSS twist drill bit set (metal drill driver accessories)

What this set is for

If you often drill into metal, a good HSS twist drill bit set quickly becomes one of those “small tools” that saves time every week. The Bosch Professional 25-piece PointTeQ set is aimed at fast, clean starting and efficient drilling in metal, with a design that’s meant to reduce wander (the annoying tendency for a bit to skid before it bites).

On paper, it’s a practical choice for anyone who needs lots of sizes without buying bits individually. The set includes 25 different diameters, ranging from 1.0 mm up to 13.0 mm, in steps that cover many common through-hole and centring jobs.

The essentials: why the PointTeQ design matters

The headline features here are about controlling the first few seconds of drilling. Bosch states that the HSS twist drill bit uses a PointTeQ tip with a reduced shank, designed for quicker drilling in metal. There’s also a centring tip intended to help prevent deviations—so instead of spending time “chasing” the hole, you get a more straightforward start.

It’s also positioned as a durability-led option: the bits are said to generate less heat thanks to higher drilling speed, which in turn should help reduce wear. That’s not a guarantee that they’ll last forever (no bit does), but it’s the sort of engineering goal that makes sense if you’re drilling regularly rather than doing one-off DIY.

A micro example: say you’re fitting a bracket and you need a couple of through holes in aliased metal parts. With a bit that starts more predictably, you’re less likely to end up with a hole that’s slightly off position—so you spend more time fitting and less time re-drilling.

Key metals and use cases (and where it may not fit)

Bosch describes the set as suitable for drilling through holes and centring in a range of materials, including alloyed and non-alloy steel, non-ferrous metals, cast steel, cast iron, and plastic. That broad list is a big reason to consider this set if your projects aren’t consistent.

That said, don’t assume “works on everything” automatically. This is a twist drill bit set for metal and related materials as described, so if you’re mainly drilling masonry, wood, or abrasive composites, you may still want a more specialist bit approach. Also, while the kit covers many sizes, you may still end up reaching for an extra diameter if your job calls for something outside the 1.0–13.0 mm range.

What you actually get in the box

The supply is clear and useful: the set includes one of each diameter

• 1.0 / 1.5 / 2.0 / 2.5 / 3.0 / 3.5 / 4.0 / 4.5 / 5.0 / 5.5 / 6.0 / 6.5 / 7.0 / 7.5 / 8.0 / 8.5 / 9.0 / 9.5 / 10.0 / 10.5 / 11.0 / 11.5 / 12.0 / 12.5 / 13.0 mm

For many buyers, that spread is the real value: you can choose the nearest size for a through-hole or centring operation without stopping the job to order individual bits.

Tech specs

• Name: Bosch Professional 25-piece PointTeQ HSS twist drill bit set
• Type: HSS twist drill bits (metal drilling accessories)
• Format: 25-piece set
• Size: 1.0 to 13.0 mm (25 diameters)
• Material: HSS (High Speed Steel)
• Compatibility: suitable for all drills and drill presses (for through holes and centring)

Pros and cons to weigh before buying

Pros

• Designed to help drill faster in metal, with the aim of reducing heat build-up
• Centring tip is intended to limit deviations at the start
• Broad diameter range in one kit (handy for through-hole and centring work)
• Fits both handheld drilling and drill press use, as described

Cons (worth noting)

• If your main tasks are outside the listed materials (for example, masonry or heavy-duty specialised drilling), this set may not be the most efficient route
• No information here on coatings, flute geometry beyond the PointTeQ concept, or performance on specific thicknesses—so the real-world results will still depend on your machine setup and technique

Who it suits best (and who should skip it)

It’s a strong match if you want a dependable “go-to” HSS twist drill bit set for metal and plastic work, and you like having a useful spread of diameters ready. It also makes sense if you’re doing repeated fitting jobs—brackets, fixings, and general through-hole work—where getting the start right saves time.

It might not be for you if you only drill occasional holes and you’d rather buy a single size as needed, or if most of your drilling is in materials not covered by the stated use (even if a drill bit might technically bite).

Should you buy it?

If you value faster, more controlled starting in metal and you want a single kit with many common diameters, the Bosch Professional 25-piece PointTeQ set is easy to justify. It leans more “workshop practical” than “one-size-fits-all fantasy”, and the description suggests it’s built for through holes and centring across several metal types.

Buy it if your projects repeatedly involve alloy/non-alloy steel, non-ferrous metals, cast materials, or plastic, and you’d benefit from owning the range from 1.0 mm to 13.0 mm.

Consider skipping it if your drilling needs are mostly outside those materials, or if you’re only after one or two sizes—because the value is really in having plenty of options rather than a single standout diameter.

Quick FAQ

Is this set suitable for drilling metal with a handheld drill?

Bosch states it’s suitable for all drills as well as drill presses for through holes and centring in the listed materials.

What diameters are included?

The set includes one bit each from 1.0 mm up to 13.0 mm, covering 25 sizes in the list provided.

What is the PointTeQ tip supposed to do?

According to the description, the centring tip helps prevent deviations, and the design is also claimed to support faster drilling in metal.

Does it focus on durability?

Bosch mentions reduced heat generation (less heat, therefore less wear), based on the described drilling-speed approach.

What should I double-check before buying?

Make sure your material matches the listed use cases (metal and the mentioned plastic types) and that your job typically falls within the 1.0–13.0 mm diameter range.