GONEO Type 2 EV Charging Cable 7.2kW 10m – 32A/1-Phase, IP54, with Storage Bag
Product description
Introduction
The GONEO Type 2 EV Charging Cable is a portable charging solution designed for European electric vehicles that use a Type 2 connector. It aims to offer a straightforward, direct connection between car and wallbox, with multiple length options to suit different parking scenarios. On the paper specification, it promises fast charging capabilities and robust construction to withstand regular use, while including a storage bag for tidy transport.
What it is and what it solves
This is a Type 2 charging cable rated for 7.2kW (32A, 1-Phase). It is intended to shorten charging times relative to slower cords and to provide convenience for those without a fixed charging lead. The 10 metre length is especially useful when the wallbox sits some distance from the parking spot, though keep in mind actual charging power depends on your vehicle and the wallbox settings.
Design and build quality
The cable uses ultrasonic welding for the contacts and a robust outer construction in PA66 nylon with high-quality TPU to balance flexibility with protection. It carries IP54 waterproofing and halogen-free, wear-resistant materials. The design is framed around safety and durability, with 8±2μm silver-plated contacts noted for conductivity and a build intended to withstand repeated use. It also carries certification and protection features aligned with IEC 62196 and EN standards.
Pros and what stands out
- Reasonable fast charging for many mainstream BEV and PHEV models that accept Type 2/CCS2 plugs.
- Long reach of 10 metres gives flexibility for shared or awkward charging locations.
- Durable construction and safety features, including protection against over-voltage, over-current and short circuits.
- Comes with a reinforced storage bag to keep the lead contained when not in use.
Limitations and things to watch
- It is not compatible with Type 1, CCS1, CHAdeMO or GB/T connectors, so verify your vehicle’s plug before purchasing.
- Actual charging performance depends on both the vehicle and the wallbox, the lead alone cannot override wallbox capability.
- While IP54 offers protection against splashes, it is not waterproof for submersion, so use with care in wet environments.
Who it’s for
This cable is a pragmatic choice for drivers who need a flexible, reasonably long Type 2 lead for European-market EVs and PHEVs, and who value a balance between durability and portability. It suits households with a garage or driveway where the wallbox is at a short-to-moderate distance from the vehicle, and for those who prioritise a dedicated charging lead over a fixed home charger.
Who it isn’t for
If you require a dedicated charging lead for a vehicle with non-Type 2 connectors, or if you frequently need very short or very long runs beyond the provided lengths, this cable may not fit perfectly. It’s also not the best pick if you rely on fast charging at higher power levels than 7.2kW where available charging circuits or vehicle limits present a tighter constraint.
When it makes sense to buy
Consider this lead if you value a ready-to-use Type 2 solution with a generous 10 m reach, straightforward compatibility with many European BEVs/PHEVs, and built-in safety protections. It’s sensible for users who want a portable option that can travel with the car, rather than a fixed, wall-mounted cable.
When to look elsewhere
If your priority is sub-2.0kW slow charging or if your vehicle requires a different connector format, a different solution may be more appropriate. If you need higher charging power for faster top-ups, you might want to assess whether your wallbox and vehicle can safely support higher outputs and whether a longer or shorter lead would better suit your setup.
What to check before buying
- Confirm your vehicle’s connector type (Type 2/CCS2 compatibility) and power acceptance.
- Measure your typical parking distance to ensure 10 m is advantageous without excessive slack or slack management.
- Check that your wallbox can safely supply up to 7.2kW and that its settings align with single-phase operation.
- Verify the lead length options you need, the product line offers several lengths to suit different setups.
Practical use case
Imagine pulling into your driveway after a short shop trip. With the 10 m GONEO lead within reach, you can connect directly to your wallbox without repositioning the car or stretching a shorter lead. The carry bag helps you pack it neatly when the journey continues, and the robust materials give peace of mind in daily use.
Comparison in context
Compared with fixed home charging cables, a detachable Type 2 lead like this provides flexibility for differing parking arrangements and makes shared-use scenarios easier. It won’t replace the need for a capable wallbox or higher-power charging where your daily needs exceed 7.2kW, but it serves as a solid option for many urban or suburban drivers who want practical, reliable charging on the go.
FAQ
- Is this compatible with my car? It supports Type 2/CCS2 vehicles, confirm your car’s connector and wallbox compatibility.
- Does it handle rain or splashes? Yes, IP54 protection offers splash resistance, but avoid submersion.
- Can I use this lead for rapid charging? It is designed for up to 7.2kW (32A/1-Phase), higher power requires appropriate equipment and vehicle support.