Frankberg ABS speed sensor rear right 12 V
Product description
Keeping your Sprinter ABS system accurate depends on reliable wheel speed signals, and this Frankberg ABS Sensor Speed Rear Right helps you restore that link on the rear axle. It is a 2 pin rear right sensor rated at 12 V, built to match specific Sprinter and C.r.a.f.t.e.r applications from 2006 to 2020, according to the provided vehicle fitment guidance. 🚐
A speed sensor that does not match your vehicle can cause compatibility issues, so it is worth checking fitment carefully before you buy. Take advantage of the AmazonConfirmedFit check and confirm your exact model details using your registration number, vehicle model, platform and engine size where available.
Key features
This rear right ABS speed sensor is supplied by Frankberg, a part number to look for when you are replacing or troubleshooting the ABS wheel speed input. The installation position is listed as the rear axle, right side, which is important for correct sensor orientation and operation. It uses a 2 pin connector design and is rated at 12 V, making it straightforward to integrate with compatible ABS wiring.
For the best results, treat this as a vehicle specific replacement rather than a universal sensor. The original compatibility notes include Sprinter 3 5-T and Sprinter 3-T ranges, with model references that cover 906 and relevant variants from 2006 to 2020. The C.r.a.f.t.e.r references shown in the fitment guidance also fall within the 2006 to 2020 window, so it can be relevant when you are working within those specified families. 🛠️
Tech specs
- Name: Frankberg ABS Sensor Speed Rear Right for Sprinter 3 5-T, 3-T, 9065400217
- Type: ABS speed sensor
- Installation position: Rear axle right
- Number of pins: 2 pin
- Rated voltage: 12 V
- Reference numbers: 68013832AA, 9065400217, 0265009339, 2E0927801A, ALS2158, 5S10638, 5S12650
What matters most
When ABS warning lights appear or sensor readings become unreliable, it is usually the quality and exact match of the sensor that make the difference. This part is listed with a defined installation position, a 2 pin connector and a 12 V rating, so you can verify the electrical and physical fit before ordering. If you prioritise correct compatibility, you can avoid the frustration of a sensor that looks similar but is not the right one.
It is worth noting that fitment guidance includes a specific set of compatible Sprinter and C.r.a.f.t.e.r model references from 2006 to 2020. Before you buy, check the AmazonConfirmedFit tool shown at the top left and look for the green This fits indicator. A red warning signifies that the part is not compatible, so re check the specifications of your item based on your vehicle details. ✅
Who it’s for
It suits drivers, mechanics and DIYers who need a rear axle right ABS sensor replacement for compatible Sprinter 3 5-T, Sprinter 3-T and the listed C.r.a.f.t.e.r ranges. You will likely benefit from it if your repair requires a 2 pin, 12 V sensor in the rear axle right position, and you want to align with the provided reference numbers. If you are not sure about your exact vehicle platform or engine size, use the registration number and the fitment checker to confirm compatibility before placing the order. 🚐