FIXCHORD Double Sided Sticky Pads (10 Pcs) – Heavy Duty Acrylic Foam Adhesive Pads for Dash Cams, Action Cameras & Home Use, 44×34mm

Key takeaways

If you want a no-drill way to mount or secure small gear, FIXCHORD’s Double Sided Sticky Pads are designed for that job. On paper, the appeal is the combination of an acrylic foam construction and a strong polymer adhesive, aimed at holding firm even when things get a bit rough (weight, vibrations, and typical day-to-day exposure).

That said, it’s not magic. Adhesive strength still depends on the surface you’re sticking to, how clean it is, and whether the wall (or dashboard/finish) is truly solid. If you’re dealing with delicate finishes or very uneven surfaces, you may need to take extra care before committing.

The essentials

These pads are double-sided and use closed-cell acrylic foam, which helps them grip while also coping better than thin tape on uneven areas. The core idea is simple: you tear open the protective paper, press the square pad to the object and/or the surface, and compress it for a quick, secure bond.

For a dash cam or action camera mount, that matters because you’re usually looking for something stable that doesn’t require holes. For home office or décor use, the same logic applies: when you want to fix something up without drilling, foam pads can spread contact pressure more comfortably than a single flat strip.

A practical micro-scenario: you clean a small patch where you want the camera holder to sit, peel the protective liner from one side of a pad, press it onto the mounting area, then peel the other side and press the camera mount in place. Give it time to settle after compression, and you’re set.

What stands out

The headline features are where these pads try to earn their keep:

• Strong, durable bonding: the adhesive is described as a strong polymer type, paired with an acrylic foam structure.
• Water and temperature resistance: the adhesive is stated to be resistant to water, UV, humidity and solvents, with an application temperature range from -15 °C to 121 °C.
• Tear resistance and “give” on uneven surfaces: the foam core is designed to be flexible, helping fill gaps and increase the bonding area.
• Removability without residue (in the right conditions): removal is described as leaving no residue and not damaging the surface of the object. A note is included that you should not use it on a wall that isn’t solid.

None of that guarantees they’ll work for every finish, but it does suggest the design is intended for real-world mounting rather than purely decorative light-duty use.

Pros

Where these pads are likely to make the most sense is when you need a sturdier alternative to basic sticky tape. If you’ve used cheap pads before and found they peel, lose grip, or look messy later, this product’s closed-cell foam approach is aimed at improving hold.

They’re also convenient: the pads are square, and the protective paper is meant to be tearable by hand, so you don’t need extra tools.

What to be careful about

The biggest limitation is surface dependency. Even with “heavy duty” adhesives, you’ll want to be realistic about where you apply them.

• Not for non-solid walls: the guidance explicitly says it’s not recommended for walls that aren’t solid, because the wall itself could fail.
• Surface prep matters: the listing strongly implies a proper bond requires clean contact and full compression. If your surface is dusty, greasy, or textured in a way the foam can’t match, performance can suffer.
• Removal isn’t always the same everywhere: while it claims residue-free removal, the practical outcome still depends on the surface type you’re removing from.

Who it’s for (and who should skip it)

It makes sense if you:

You’ll like it if you’re trying to mount a dash cam or action camera without drilling, or you need a simple method to fix home items where a permanent hole would be overkill.

Better avoided if you’re planning to stick pads onto non-solid wall types, or if you’re working with finishes that are difficult to clean and can’t be fully compressed during application.

¿Merece la pena?

Overall, these FIXCHORD double sided sticky pads look like a practical “get it mounted quickly” option with a clear focus on stronger adhesion and environmental resistance. The temperature/application range and water/UV resistance are useful signposts if the mounting area will see heat and sunlight.

However, if you’re after a guarantee on every surface—especially varied wall types or fragile coatings—this may not be perfect. For most straightforward mounting jobs on solid, clean surfaces, it’s the kind of product that can be genuinely convenient. If your situation is more complicated (loose substrates, highly textured surfaces, or finishes you can’t prep properly), it’s worth thinking twice before committing.

Tech specs

• Type: Double sided adhesive foam pads
• Pack size: 10 pcs
• Material: Acrylic foam (closed-cell foam) with polymer adhesive
• Dimensions: 44×34mm
• Application temperature range: -15 °C to 121 °C

Mini FAQ

Are these pads designed for dash cams and action cameras?

They’re specifically described for use as a dash cam sticky pad and for action cameras, where you want secure holding without drilling.

Do they handle water and sun exposure?

The adhesive is described as water resistant and resistant to UV, humidity and solvents, and it’s stated to remain adhesive under intense sunlight.

Can I remove them without damaging the surface?

The listing says they can be removed without leaving residue and without damaging the surface of the object, but it also notes they aren’t recommended for non-solid walls.

What’s the easiest way to apply them?

Tear the protective paper, stick the pad to the mounting surface/object, then compress it so it bonds quickly.

What’s the main reason they might not work well?

If the surface isn’t clean, isn’t solid (for wall applications), or can’t be properly compressed for bonding, the hold may not match expectations.