Emitever 68211 double sided mounting tape 8.2m

This Emitever 68211 double-sided tape is a heavy-duty mounting solution for fixing picture frames, light strips and decorative elements without screws or glue. It combines strong initial tack with a waterproof acrylic foam core so you can mount items indoors or outdoors with confidence.

Key Points

The tape offers a high tensile strength that allows secure bonding on metal, smooth wood, plastic and glass. It leaves minimal residue on removal, which helps preserve painted or varnished surfaces after taking items down. According to the manufacturer, the product has UV resistance and performs reliably in wet rooms such as bathrooms and kitchens, and in exterior installations where moisture and changing weather are a concern 😊.

This tape is pressure-sensitive, so items adhere firmly with simple hand pressure and no special tools are required. Consider that very rough or heavily textured surfaces may reduce contact area and therefore diminish adhesion, so surface preparation improves long-term hold.

Technical Specifications

• Name: Emitever 68211 Double Sided Tape
• Length: 8.2 m
• Width: 15 mm
• Thickness: 1.1 mm
• Tensile strength: 28 N/cm
• Temperature range: -45°C to 120°C in long-term service, short-term resistance up to 200°C, according to the manufacturer

Benefits

The 1.1 mm acrylic foam core creates a waterproof seal that resists moisture ingress and helps maintain adhesion in humid conditions. The strong tack makes it suitable for lightweight signs, cable runs and mounting LED strips, while the peel-off liner supports neat application. Using this tape can speed up decorative work and small repairs, and it avoids visible fixings that might alter the look of a room 🎨.

The UV resistance helps prevent yellowing and loss of stickiness when exposed to sunlight for prolonged periods. Also, its compatibility with many smooth substrates reduces the need for separate adhesives or mechanical fasteners, which is useful for quick installations.

Usage Recommendations

For best results, ensure surfaces are clean, dry and free of dust or grease before applying the tape. Press firmly along the length of the tape to maximise contact and allow several hours before loading the bond, especially in cooler conditions. For outdoor or load-bearing applications, test a small area first and consider additional mechanical support if the mounted item is heavy or subject to frequent movement 🔧.

Handle the strip with care during application to avoid stretching the tape as that can weaken the adhesive bond. Store unused rolls in a cool, dry place away from direct sunlight to preserve performance.