ELEGOO Matte PLA Filament Navy Blue 1kg 1.75mm 🖨

This matte PLA filament from ELEGOO delivers a low-gloss finish that reduces visible layer lines, making printed parts look smoother for display pieces and prototypes. It is supplied as a 1 kg cardboard spool of navy blue filament with a 1.75 mm diameter and a stated dimensional accuracy that helps maintain consistent extrusion during longer prints.

Key Points

The filament produces a soft, matt surface that hides minor imperfections and gives models a professional appearance. It is wound neatly on a cardboard spool to reduce tangles and feeding issues during printing. The manufacturer reports a dimensional tolerance of +/- 0.02 mm, which aims to keep layer consistency and minimise nozzle clogs during typical FDM workflows. 🧵

This material is compatible with most 1.75 mm FDM printers, including popular consumer models. Note that if you use an enclosed printer, leaving the door open while printing may improve results according to the manufacturer, because PLA can be sensitive to trapped heat. 🎨

Benefits

A matt finish makes post-processing easier when painting or sanding, because it reflects less light and conceals small blemishes. The filament is packaged in vacuum-sealed conditions and produced in a dry, dust-controlled environment to reduce moisture-related problems and bubbles, which can interrupt prints or affect surface quality. The consistent winding helps reduce the chance of mid-print snags, and the neutral navy blue is suitable for both functional parts and decorative pieces.

Technical Specifications

• Name: ELEGOO Matte PLA Filament Navy Blue 1KG
• Diameter: 1.75 mm
• Tolerance: +/- 0.02 mm
• Net weight: 1 kg (2.2 lbs)
• Spool type: cardboard spool
• Colour: navy blue

Usage Recommendations

Start with standard PLA print temperatures for your printer and adjust in small increments if flow or adhesion issues appear. Use a moderate print speed to take advantage of the smoother matte surface, especially on visible faces. Store unused filament in a dry place and reseal it after opening to maintain low moisture levels. Consider slight cooling adjustments when printing taller or finer details, because the matt PLA can behave differently from glossy variants and may need tuning for overhangs or thin walls.