baolongking IR Emitter Extender Cable 10ft

This compact IR emitter extension cable makes it easy to control multiple A/V devices from an IR repeater system in another room. The 10-foot lead gives enough reach to place the sticky emitters over the IR eyes of several components, allowing a single remote signal to be reproduced across an entertainment rack or cabinet. If you need to extend remote control to a hidden TV, amplifier or set-top box, this IR emitter extender extension cable helps bridge the gap with minimal fuss.

Key Points

The cable includes four small stick-on emitters on a single 3.5mm mini-plug, so you can operate several components from one IR output. Each emitter has an adhesive backing that attaches directly over the IR receiver on devices such as DVD players, satellite receivers and AV amplifiers. The quad heads let one repeater system drive multiple devices simultaneously, which is useful when equipment is stored inside closed cabinets or out of sight 🎛️. Consider that the emitters rely on correct placement over the device IR window and may not work as well if the surface is curved or the adhesive is impeded by heavy dust.

Technical Specifications

• Name: baolongking IR Emitter Extender Extension Cable (10 Feet)
• Cable length: 10 feet
• Connector: 3.5mm mini-plug
• Heads: 4 emitter heads
• Mounting: Adhesive backing for stick-on placement

Usage Recommendations

Place each emitter so it sits directly over the device’s IR eye for best response. Clean the area first and press the emitter firmly to ensure the adhesive makes good contact. When routing the cable, avoid tight bends and sharp kinks as this may shorten the product life. For systems with separate IR connecting blocks or home automation controllers, plug the mini-jack into the repeater’s output and test each component in turn to confirm the signal reaches every unit. Also note that very bright ambient light or reflective cabinet interiors can sometimes reduce IR reliability, so try shielding the emitters from strong light sources when necessary 📺. Finally, this accessory is compatible with common setups including Xbox One IR passthrough arrangements and standard IR repeater kits, but check that your repeater provides a 3.5mm IR output before assuming compatibility 🔌.