ANYCUBIC ABS-Like Resin Pro 2 3D Printer Resin (White, 1kg) – enhanced strength, low shrinkage & low odour

The essentials

If you want resin prints that feel more “engineering-like” rather than brittle, ANYCUBIC ABS-Like Resin Pro 2 is designed for better strength and toughness. On paper, it takes the idea of ABS-style behaviour and nudges it towards tougher, more resilient parts, with a focus on reduced shrinkage for sharper detail.

It’s the sort of resin you’d pick when your model needs to survive handling, flex slightly, or be used as a functional prototype rather than purely decorative display pieces. That said, it’s still a resin product—some people will prefer a tougher, less finicky material, but results will depend on your printer setup and curing habits.

Where it really helps in real projects

This resin is described as having enhanced strength and toughness versus the previous ABS-Like version. The brand highlights improved elongation to break (over 100% for the earlier comparison) and aims for finished models that are stronger and more durable.

In day-to-day terms, that translates into a sensible fit for things like: - structural or support-like parts in prototypes - industrial-style prototype components - tough accessories and functional parts that see repeated use

A small, practical example: if you’re printing a replacement bracket or a connector piece for a prototype assembly, you’ll typically care about not cracking during test fitting. This resin’s pitch is clearly aimed at that kind of “use it, stress it a bit” scenario.

What to expect from accuracy and shrinkage

Detail matters with resin, but shrinkage can be the enemy of dimensional accuracy. This ABS-Like Resin Pro 2 is positioned as having minimal shrinkage, which should help reduce distortion and support crisp, vivid detail on the first run.

It also claims high fluidity thanks to low viscosity. That combination is often what you want if you’re trying to avoid messy surface issues or incomplete formation—especially on finer features. There’s also mention of fast reflow, which is said to help minimise delamination during printing.

Worth noting: “minimal shrinkage” is still something you’ll only fully benefit from if your exposure settings and environment are in the right ballpark. If your settings are wildly off, even a good resin can’t fully save a print.

Ease of printing and surface behaviour

Two parts of this resin’s description are aimed at making the printing process smoother: lower viscosity and good adhesion to the build plate.

The brand claims: - lower viscosity and higher fluidity for shorter cure times and easier model formation - improved adhesion to the plate to reduce the risk of print failures

If you’ve had resin prints that detach or fail partway through, that adhesion angle will matter. It’s not a guarantee, but it does suggest this resin is trying to be more reliable in typical LCD/DLP workflows.

Compatibility and practical limitations to bear in mind

ANYCUBIC states compatibility with LCD and DLP 3D printers that operate within the 365–405nm wavelength range. If your printer’s light source falls outside that range, you shouldn’t assume it will work as intended.

Also, the product name includes “ABS-Like”, which is a helpful pointer to the intended feel of the finished parts. But it’s not the same as having an actual ABS plastic workflow—so if your goal is maximum heat tolerance or a very specific polymer-like behaviour, you’ll want to confirm expectations for your application.

Smell and colour considerations

Nobody loves strong fumes, so the resin is described as low odour, developed to reduce discomfort for people sensitive to smells. That makes it easier to live with during printing—especially if your setup isn’t in a fully ventilated, separate space.

Colour is another practical angle. The description says it comes in multiple colours with good colour retention, and that the black version has been specially improved for saturation and richness. In other words, this resin isn’t only about strength and accuracy, it’s trying to keep visual results consistent too.

Tech specs

• Name: ABS-Like Resin Pro 2
• Type: 3D Printer Resin
• Colour: White
• Capacity: 1kg

Final verdict

It’s a solid pick if you want ABS-like toughness from resin and you care about reduced shrinkage for sharper detail—particularly for functional prototypes and parts that need to handle a bit of real-world use.

You may want to skip it if your priority is purely decorative prints, or if your printer’s 365–405nm range isn’t a match (compatibility is a big deal with resin). And if you’re chasing “it just works” reliability every time, keep in mind that exposure tuning and environment still matter, even with a resin that’s designed to reduce delamination and improve plate adhesion.

Mini FAQ

Will ABS-Like Resin Pro 2 print with any LCD or DLP resin printer?

It’s described as widely compatible with LCD and DLP printers operating at 365–405nm. If your printer uses a different wavelength, you should check compatibility first.

Does it help reduce warping or distortion?

The resin is positioned as having minimal shrinkage, which should reduce distortion and support better dimensional accuracy.

Is it suitable for functional prototypes?

Based on the emphasis on enhanced strength and toughness, it’s aimed at parts that benefit from durability—like prototype components and structural accessories.

Is it low odour compared with typical resins?

The brand claims a low-odour formula designed to reduce discomfort for people sensitive to smells.

What colour options are available?

The description says it’s available in various colours, with notes about colour retention and improved saturation for the black variant.