Amazon Basics Metal Curtain Pole Ceiling Brackets (Set of 2) – Black
Product description
What it is
A pair of ceiling-mount curtain pole brackets designed for rods up to 2.5 cm in diameter, finished in black. Each bracket is built to support floor‑to‑ceiling drapes or can be used on walls to create room dividers.
How it’s built

Made from durable yet lightweight cast metal, these brackets weigh 159 g each and feature a black finish. The base diameter is 4.7 cm, and the bracket length is 8.9 cm, offering a compact yet sturdy mounting point.
What it’s good for


If you’re aiming for a clean ceiling-mounted look or want a simple partition solution, these brackets provide a practical accessory that pairs with matching amazon Basics curtain rods and clip rings (not included). They come with the mounting hardware you need to get started.

What to watch for
On the strength side, each bracket supports up to 4.9 kg (10.8 lb), together, the pair can handle up to 9.9 kg (21.8 lb). If you’re hanging very heavy drapes or dense fabric, you’ll want to weigh the total load carefully and consider whether this setup meets your needs. And while they’re pitched for ceiling use, they can also be mounted on walls if you’re aiming to partition a space—though the angle and load will be different from ceiling mounting.
Who it’s for

Great for bedrooms, living rooms, dining areas, or offices where a neat, unobtrusive curtain solution is desired without overt hardware. It’s also a sensible option if you’re looking to create a soft room division without tall, bulky hardware.


When to buy it
If you prioritise a straightforward install, modest weight tolerance, and a matte black finish that pairs with a range of decors, these brackets are worth considering. They’re especially sensible when you’re aligning with an Amazon Basics rod system.

When it may not be perfect
If your drapes are exceptionally heavy or you need a high degree of lateral adjustability, you might outgrow the 4.9 kg per bracket limit. Also, if you require a ceiling solution with special architectural constraints, you may need alternative brackets or mounting hardware.
Quick checks before purchase



- Confirm your curtain rod diameter is 2.5 cm or less.
- Check that the total fabric weight plus any decorative elements stays within the combined 9.9 kg capacity.
- Ensure you have compatible mounting hardware or plan to install on a suitable ceiling or wall surface.
Practical use example
Imagine hanging mid-weight drapes in a living room with a high ceiling. You’d mount the two brackets to the ceiling, slide your rod in place, and finish with clip rings. The result is a tidy, unobtrusive track that doesn’t overpower the space while giving you an easy route to open and close.

FAQ
- Do these brackets come with mounting screws? Yes, mounting hardware is included.
- Can they be used on walls instead of ceilings? Yes, they’re designed for ceiling mounting but can be wall-mounted if required.
- What is the maximum total load for the pair? 9.9 kg in total (10.8 lb per bracket, 21.8 lb combined).
Final verdict
Is it worth it? Worth considering if you want a straightforward, budget-friendly ceiling-mount solution with a clean look and decent load capacity for typical drapes.
Products with discounts that might interest you
- TV wall mount for plasterboard TVs
- UIQELYS Pole Mount Bracket for Eufy SoloCam S340
- Mooche Black 90 Degree L Shelf Support Brackets (6Inch) for Floating Shelves
- WXPSKY Starlink Pole Mount Gen 3 (aluminium alloy) for Gen 3 Dishy
- Yeabett 4 Pack Shelf Brackets (30cm) Heavy Duty Wall Brackets, up to 75kg load, black
- XLTTYWL Starlink Gen 3 360° adjustable wall mount 📡
- Mooche 4 pcs stainless steel curtain pole holders rail brackets (wall mount) in black
- Aetubree Studless Drywall TV Mount 26–55in
- OMIDEAS 10 x Angle Brackets 90 x 90 x 65 mm
- Anteabee Studless Drywall TV Wall Bracket 68KG
- GRIFEMA GB2003-1 Single Monitor Arm Desk Mount (13–32 in) with Gas Spring, VESA 75/100mm, Black
- BONTEC Universal TV Wall Mount 13–30 inch, 15kg
- ELIVED Tilt TV Wall Bracket for 37-82" TVs 600x400mm
- Forging Mount Long Reach TV Wall Bracket
- futrue-wolker Starlink Gen 3 tripod stand with angle-adjustable mounting kit
- JXMTSPW TV Wall Bracket 85kg, Low Profile
- Perlegear TV Wall Bracket for 26-60 inch TVs up to 52kg
- PERLESMITH PSMFK10 TV wall bracket 40kg, 26–60in
- Adjustable Decking Pedestal, Riser, Bearing, Support for 18mm-30mm Decking (Pack of 10)
- KAMIWI No Stud TV Wall Bracket for 22–55 in TVs — No Drill, Low Profile, Up to 45kg
- Starlink Gen 3 Pipe Adapter Mount for Standard Dish – Aluminium Alloy Pole/Mast Mount Plate
- Heavy-Duty Scaffold Board Shelf Brackets 15cm (2 Pack) – Industrial Metal Floating Shelf Supports, Black
- JIAYUET 30-Pack Flat Connecting Joining Plates (80 x 40 x 2mm) – Stainless Steel Brackets for Wood Repair
- Salange Adjustable Projector Mount 21.1in

