AIFHDAUF SCART to HDMI Converter with Cable (USB-powered) for Sky, DVD & STB to HDTV

What it is and why you’d want it

This AIFHDAUF SCART to HDMI converter turns an analogue SCART signal into an HDMI output for using older devices on a modern HDTV or monitor. It’s aimed at the specific “I’ve still got Sky/DVD/STB gear and my TV only has HDMI” problem. On paper, the pitch is straightforward: feed in SCART, get an HDMI 720p/1080p output, and you can display it on an HDMI-capable screen.

If you’re replacing equipment, it’s not always the first choice. But for keeping older boxes running without buying a whole new setup, an adapter like this can make a lot of sense.

Key takeaways on output and signal limits

The important bits are the supported signal types, because this is where these converters often make or break the result.

This unit supports SCART input formats including PAL, NTSC3.58, NTSC4.43, SECAM, PAL/M and PAL/N. On the output side, it is compatible with HDMI 1.3 and supports 720p and 1080p.

However, there’s a limitation you should take seriously: it supports a CVBS signal, not the RGB signal. In real terms, if your SCART source depends on RGB for the best picture, this converter may not deliver what you expect. The device may still work, but you could end up with a less consistent picture quality than you’re hoping for.

The essentials of setup (and what “plug and play” really means here)

The converter is described as lightweight and portable, with no driver installation needed. That makes it a good “weekend setup” item: you don’t need to fiddle with software.

Power is supplied via a USB micro cable (included), which you can connect to most 5V USB plugs (not included), power banks, or other USB power supply devices. That’s handy if your TV’s USB port isn’t convenient or you prefer powering it from a wall adapter.

In the box, you get: - SCART to HDMI converter - HDMI cable - USB cable - user manual (English language not guaranteed)

One practical note: because the manual language isn’t guaranteed, it’s worth being comfortable with basic connections before you unbox.

Where it works best (and a quick use example)

It’s a sensible match if your goal is to watch content from legacy equipment on an HDMI TV, using the SCART output from devices such as DVD players, set top boxes, Blu-player devices, and Sky (or similar SCART-equipped sources).

For example: imagine you’ve got a Sky or older DVD setup in a spare room where the TV has no SCART socket. You’d connect the SCART cable from the Sky/DVD output into this converter, then run the included HDMI cable into the HDTV. Finally, power the converter via USB from a suitable 5V plug. After that, you’d switch your TV to the relevant HDMI input and you should see the analogue source displayed.

Things to watch before you buy

Before committing, check these points carefully:

It only goes one way: it converts SCART to HDMI, and it explicitly does not support HDMI to SCART. So if you’re trying to send an HDMI signal into an old SCART TV or recorder, this isn’t the right direction.

Also, bear in mind the CVBS vs RGB note. If your SCART source is configured for RGB output and you were counting on RGB quality, you may be disappointed. This converter may still function, but it’s not positioned as the “best possible picture” route.

Finally, output support is listed as 720p/1080p and HDMI 1.3 compatibility. If you’re expecting advanced HDMI features beyond basic display output, it’s worth keeping expectations grounded.

Pros and cons in plain terms

What you’ll likely like - Simple SCART to HDMI conversion for older Sky/DVD/STB-style devices - Plug and play with no driver installation mentioned - USB-powered, so you can use a 5V USB plug or other USB power sources - Included HDMI and USB cables reduce the chance of missing essentials

What may annoy you - No HDMI to SCART support (so the direction must be correct) - CVBS support but not RGB can limit picture quality depending on your source - Manual language may not be reliably English

Is it worth it?

Buy it if you’ve got a SCART-equipped device you want to use on an HDMI HDTV or monitor, and you’re happy with a practical “get the signal onto the screen” solution. It suits households with older set top boxes, DVD/Blu-ray players, or Sky-style equipment where replacing the hardware isn’t really on the cards.

It may not be the best choice if your SCART setup relies on RGB for better picture results, or if you’re actually trying to convert in the opposite direction (HDMI to SCART). In those situations, you’ll likely waste time troubleshooting cables and settings when a different adapter type would fit better.

Mini FAQ

Will this work if my device only has HDMI?

No. This converter is intended for SCART input to HDMI output. It doesn’t support HDMI to SCART.

Does it support RGB from SCART?

It supports CVBS, not RGB. If your SCART source uses RGB, it may not behave the way you expect.

What resolutions does it output?

The HDMI output is described as supporting 720p / 1080p, with HDMI 1.3 compatibility.

What power does it need?

Power is provided via a USB micro cable (included). You’ll need a suitable 5V USB power source (for example a USB plug, power bank, or similar USB supply).

What formats does it accept on the SCART side?

It supports PAL, NTSC3.58, NTSC4.43, SECAM, PAL/M and PAL/N standard TV formats.