53.5"/136cm 2-in-1 Selfie Stick Tripod Kit for DJI Action 5 Pro/4/3 & Osmo 360
Product description
The essentials
If you film on the move, you’ll know the trade-off: either you go handheld and accept shake, or you set up a tripod and lose the quick “grab-and-go” workflow. This 2-in-1 selfie stick tripod kit is designed for that middle ground. It combines a handheld extension grip with a floor tripod stand, so you can switch between walking shots, vlogging angles, and steadier frames without changing your kit.
It’s also very travel-minded. The whole idea here is to fold down small enough to carry easily, then extend to a much taller height when you need group shots or a higher camera angle. That combination is handy for travel vlogs, TikTok-style clips, and YouTube recordings where you might move location a few times in a day.
One thing to be aware of upfront: the magnetic quick-release adapter included is stated as not compatible with DJI Osmo Action 6 and Osmo Nano. If you own one of those, this kit may not fit your setup as smoothly as you’d hope.
Where it shines in real use
On paper, “two-in-one” can mean compromises. In practice, this kit focuses on practical filming scenarios:
- Walking and handheld filming: use it as an extension rod for action-camera vlogging, keeping the camera at a comfortable distance without constantly adjusting your arms.
- Stabilised, floor-based shots: when you want steadier footage (talking to camera, capturing a scene, or filming a small group), you can stand it up like a compact tripod.
- Angle chasing on location: extending to 53.5 inches (136 cm) can help when you want a higher perspective—useful for scenery, crowd shots, or getting the “perfect angle” without hunting for a rock, ledge, or bench.
There’s also a simple stabilisation detail worth noting: it includes grippy silicone feet for holding on horizontal surfaces. It’s not a studio tripod, but it’s the kind of everyday feature that helps when you’re filming outdoors or on uneven paving.
Key specifications (what to check)
This kit is built around a practical range and standard mounting approach:
- Size (extended): 53.5 in (136 cm)
- Size (folded): 11.6 x 1.5 in (29.5 x 3.8 cm)
- Sections: 5 adjustable sections
- Minimum length: 11.6 in (29.5 cm)
- Weight: 0.66 lb (315 g)
- Thread adapter: 1/4-inch thread adapter included
- Mount included: Osmo Action magnetic quick-release adapter mount
If you’re deciding between this and a more basic selfie stick, the extension range and the tripod-style use are the obvious differentiators. If you’re deciding between this and a full tripod system, you’re trading maximum stability and accessory flexibility for mobility.
Compatibility, adapters and limitations
The kit is described for use with DJI action and Osmo devices, including DJI Osmo Action 5 Pro/4/3, Osmo 360, and certain Osmo Pocket models, as well as a list of GoPro models. However, the most important compatibility detail provided is the magnetic quick-release adapter limitation: it is not compatible with DJI Osmo Action 6 or Osmo Nano.
So it may work perfectly if you’re within the stated supported lineup, but it might be a frustrating mismatch if your current gear relies on that specific magnetic system for Action 6 or Nano.
It also includes a 1/4-inch thread adapter, which is useful to consider if your camera mount setup uses a standard thread rather than the magnetic mount route.
The quick decision: should you buy it?
It’s worth considering if you want a compact travel vlogging stand that can switch between handheld extension and a floor tripod, especially for action-camera style filming. The fold-down size and included mounts make it a decent match for casual creators who film across different spots in a single day.
Buying is less sensible if you specifically need compatibility with DJI Osmo Action 6 or Osmo Nano—because the kit’s included magnetic quick-release adapter doesn’t support those. And if your priority is maximum, heavy-duty stability in windy or low-light conditions, this is more of a mobile support than a “serious tripod replacement”.
FAQs
What’s included in the box?
You get 1x 2-in-1 selfie stick tripod, 1x 1/4-inch thread adapter, and 1x Osmo Action magnetic quick-release adapter mount.
How long does it extend to?
It extends from 11.6 inches (29.5 cm) up to 53.5 inches (136 cm) using 5 adjustable sections.
Is it genuinely portable?
It folds down to 11.6 x 1.5 inches (29.5 x 3.8 cm) and weighs 0.66 lb (315 g), which should be easy to stow in a backpack for days out.
Any magnetic mount limitations?
Yes. The included magnetic quick-release adapter mount is not compatible with DJI Osmo Action 6 and Osmo Nano.
Final verdict
A sensible buy if you want one travel-friendly accessory that covers extension grip vlogging and simple tripod-style framing, without carrying a separate tripod. Just double-check whether your camera relies on the magnetic quick-release system—and if you’re on Action 6 or Osmo Nano, this kit may not be the right fit.