Connextion OJD-06135 White Bathtub Repair Kit, 100 g Resin Paste

For anyone looking to repair chips, cracks or small holes in a bath, sink or other hard surface, the Connextion white repair kit brings the repair compound and application tools together. Its resin paste is intended for use on bathtubs, sinks, ceramic surfaces, tiles, porcelain, acrylic and granite, helping to restore the appearance of damaged areas without replacing the whole fixture.

The white finish suits bathroom ceramics and other white surfaces, while the waterproof compound is designed for repairs in places that are regularly exposed to water. The kit contains 100 g of repair compound, along with tools for mixing, applying and smoothing the repair.

Key points

This is a practical choice for targeted repairs: use it to fill a chip in a ceramic sink, address a crack in a bath or touch up damage to a tiled surface. The range of stated materials makes it useful around the bathroom and for selected household ceramic items, including porcelain, acrylic and granite. It is also suitable for artisanal ceramic objects.

The compound comes in white, with a medium-to-high viscosity that helps it stay workable as you apply it to the damaged area. Strong adhesion is a stated feature, and the subtle shine described for the finish can help the repaired spot sit more naturally alongside bathroom ceramic. For a localised blemish, a repair kit offers a more focused approach than replacing an entire bath, sink or tile.

Usage tips

Start by thoroughly cleaning the area to be repaired. Mix components A and B in a 1:1 ratio, then apply the paste with the supplied trowel. Allow 24 hours for the compound to cure fully before sanding the surface smooth with the included sandpaper. Following these steps gives the repair time to set before the area is brought back into use.

The set includes 2-in-1 porcelain repair glue, a trowel, a push rod, two sheets of sandpaper and a scraper. Having these tools together supports the process from preparation through to the final smoothing, whether you are working on a bath, sink, shower tray or tile.

Getting the most from it

Keep the repair focused on the damaged section and prepare the surface before mixing the compound. Apply it with the trowel, then use the scraper as needed to shape the filled area. Once the full curing time has passed, sand the repair carefully to smooth its surface. The compound’s white colour is especially suited to white ceramic finishes, and the stated material range gives it uses beyond a single type of bathroom fitting.

For example, a chip in a porcelain basin can be cleaned, filled with the mixed paste and smoothed after curing, using the supplied tools throughout. The same repair-led approach can be used on other listed surfaces such as acrylic or tiles, making this a useful kit to keep for small, specific touch-ups around the home.

Should you buy it?

Choose the Connextion kit if you want a ready-to-use set for repairing localised damage to baths, sinks, tiles or other listed surfaces. Its 100 g of white resin paste, waterproof properties and included application and sanding tools make it suited to careful touch-ups where restoring a damaged area is the aim. The 24-hour cure time provides a clear step to plan around before sanding and returning the repaired area to use.