BGS 8332 Lever Barrel Pump for Urea (AUS32), Manual, 20 l/min

When transferring AUS32 from a drum, the BGS 8332 uses a hand-operated lever to move the fluid through a flexible hose. Its 0.5-litre delivery per stroke and stated flow rate of 20 litres per minute make it a practical choice for routine fluid transfer without a powered pump.

The pump is also suitable for water, lubricants, screenwash, antifreeze, mild detergents and agricultural chemicals. It fits 60, 200 and 220 l barrels, so it can serve a range of drum sizes in a workshop, farm or vehicle-maintenance setting.

Practical tips

Set the pump up on a compatible barrel and position the flexible hose at the receiving container before operating the lever. The pluggable suction tube adjusts from 350 to 980 mm, helping it reach into the barrel as needed, the hose is 2 m long. The adaptor thread size is 2" BSP, a useful detail when matching the pump to the barrel connection.

Use it for the listed fluids within its stated temperature range of -5 °C to 45 °C. For example, when dispensing AUS32 into a vehicle’s fluid container, the lever operation gives you control over each stroke, with a stated delivery volume of 0.5 litres per stroke. Follow the handling requirements for the fluid being transferred and keep the pump intended for the relevant liquid.

Key specifications

• Type: Lever barrel pump
• Operation: Manual
• Suitable barrel sizes: 60 / 200 / 220 l
• Delivery volume: 0.5 l per stroke
• Flow rate: 20 l/min
• Suction tube: 350–980 mm, pluggable
• Flexible hose: 2 m
• Adaptor thread: 2" BSP
• Suitable liquids: AUS32, water, lubricants, screenwash, antifreeze, mild detergents and agricultural chemicals
• Temperature range: -5 °C to 45 °C
• Main materials: Polypropylene, polyethylene and fluor elastomer seals
• Dimensions: 24L x 15W x 41H centimetres
• Weight: 1.22 kilograms

Strengths

The BGS 8332 brings the key parts of a drum-transfer setup together: a lever pump, an adjustable suction tube and a flexible hose. That arrangement is useful when fluids need to be moved from barrels into smaller containers, without relying on an electric power source. Its suitability for several common workshop and agricultural liquids also gives it scope beyond AUS32, while the stated barrel sizes help you assess its fit for your existing drums.

Compared with choosing a powered transfer pump, this manual design is centred on lever operation and straightforward fluid dispensing. It’s a good fit if you want a pump for listed liquids and compatible barrel sizes, with the hose and suction-tube measurements suited to your working arrangement.

Before you decide

Which fluids can it transfer? It is suitable for AUS32, water, lubricants, screenwash, antifreeze, mild detergents and agricultural chemicals.

What barrel sizes does it suit? The pump is listed for 60, 200 and 220 l barrels. Its adaptor thread size is 2" BSP.

How does fluid reach the receiving container? Operate the manual lever to draw fluid through the pluggable suction tube, then direct it through the 2 m flexible hose. The stated delivery is 0.5 l per stroke, with a flow rate of 20 l/min.

When it makes sense

Choose the BGS 8332 when you need a manual way to transfer AUS32 or another listed fluid from a compatible barrel. Its adjustable 350–980 mm suction tube, 2 m hose and measured delivery per stroke make it a practical match for regular workshop, vehicle-maintenance or agricultural fluid handling.