Spicer seal 2-86-418

Where it shines

If you need a replacement part for a specific driveline setup, fitment matters more than a long list of general claims. The Spicer 2-86-418 is described as a genuine OE replacement seal for a 1310-series application, with fitment stated for 1310/1330 U-joints on a Double Cardan Joint CV driveshaft.

That makes it a focused part rather than a general-purpose seal. If you prioritise matching the stated joint and driveshaft application, this listing gives you a useful starting point, if you prefer to choose by dimensions or material, those details are not provided here.

A practical scenario: while identifying a replacement during CV driveshaft service, you can compare the part number and the stated 1310/1330 fitment with the assembly you have. That is more useful than relying on the broad label “seal” alone, but it is not a substitute for confirming the exact application.

Highlights

The main distinction is the OE-replacement positioning and the 1310-series description. The product name also specifies 1310/1330 U-joints on a Double Cardan Joint CV driveshaft, so the intended context is more precise than a seal listing that gives no driveline application. The reference number, 2-86-418, is another detail to match when identifying the part.

There is little else to judge from the available information. No dimensions, material, installation guidance or additional compatibility list is supplied. Those omissions matter if you are comparing seals by physical measurements or need confirmation for a different joint or driveshaft arrangement. Without having tested it, I would treat the stated fitment as the reason to consider this part, not as proof that it suits every assembly described as 1310 or 1330.

It suits you if you are replacing a seal for the specified Double Cardan CV driveshaft application and can confirm the part number against your existing setup. It is not for you if you need a seal selected by measurements, material details or confirmed fitment for an application not named in the listing.

Best use cases

This part is most relevant when you already know the replacement reference or are servicing a Double Cardan Joint CV driveshaft with the stated 1310/1330 U-joint fitment. It can help narrow the search when you have the old part number or clear application details in front of you. For example, note the reference from the removed part, then compare it with 2-86-418 and the joint series before ordering.

A broader, less specific seal may be easier to assess if you are shopping by measurements alone, but this listing does not provide measurements to support that approach. Likewise, if your assembly uses a different configuration, the description offers no basis for assuming compatibility. Check the vehicle or driveline service information, the existing part reference, and the joint application rather than relying on the word “Spicer” or the word “seal” by themselves.

To wrap up

The Spicer 2-86-418 is worth considering when its stated OE-replacement role and 1310/1330 Double Cardan CV driveshaft fitment line up with the part you need. The specific application is its strongest buying point. If you cannot confirm that match, the missing dimensions and broader compatibility details leave too much uncertainty to choose it confidently, identify the assembly first or look for a listing with the information needed to verify fitment.