PAULINN RM-RV155 & ED-1501R 20A 125V Shore Power Inlet with 18-Inch Cord
Product description
The integrated cover helps shield the inlet contacts from rain, snow and dust when the connection is not in use, while the 18-inch extension cord gives you a practical connection point for an RV, trailer or other listed setup. Rated at 20A/125V, this shore power inlet is designed to bring power access to a fixed location rather than relying on a loose plug arrangement.
Its five-format plug compatibility supports a range of NEMA connections, making it useful for different power setups. The inlet is installed with four screws after drilling a 2-inch opening, with no wiring or cable modification required.
Everyday use
Install the inlet where you need an accessible power connection on a camper, trailer, RV, boat or other suitable application. The attached 18-inch cord connects to the power source, while the covered inlet provides a defined access point for equipment. It can also be used for applications such as a generator or battery charger connection, as well as a block heater setup.
The five-in-one plug design is compatible with NEMA 1-15P, 5-15P, 5-20P, 6-15P and 6-20P formats. For devices using a 6-15 or 6-20 connection, the device must support 110V–250V. This gives the inlet flexibility across the listed plug formats while keeping the applicable voltage requirement clear.
Technical details
- Type: Shore power inlet with extension cord
- Rating: 20A/125V
- Cord: 18 inches, 12 AWG copper wiring
- Connector: Male-to-female
- Plug formats: NEMA 1-15P, 5-15P, 5-20P, 6-15P and 6-20P
- Installation: Drill a 2-inch hole and secure with four screws, no wiring or cable modification required
- Protection: Integrated cover protects contacts from rain, snow and dust while not in use
- Model: RM-RV155 & ED-1501R
What stands out
The attached cord and fixed inlet work together as a compact connection point for vehicles and other listed applications. Instead of arranging a separate loose extension at the access point, you can mount the inlet where power is needed and connect through its built-in 18-inch cord. The copper wiring is 12 AWG, and the unit is rated for 20A/125V.
The cover is a practical feature for outdoor installations: it shields the contacts when the inlet is not being used. Installation is also straightforward in principle, using a 2-inch opening and four screws, without wiring or modifying a cable. For 6-15 and 6-20 devices, confirm that the device supports 110V–250V before connecting.
Should you buy it?
It suits you if you need a mounted shore power inlet for an RV, camper, trailer, boat or another compatible setup, and want the cord and connection point in one assembly. The 18-inch extension, five listed NEMA plug formats and protective cover address the practical needs of connecting power and keeping the contacts covered between uses. Choose it for a fixed, covered inlet arrangement with the stated 20A/125V rating.