Partsam LED tail lights 33 LEDs

When replacing worn or damaged rear lights on a 12V truck, trailer, van or other listed vehicle, these Partsam LED tail lights combine several signals in a two-light set. Each square unit has a smoked lens and 33 LEDs, with functions for braking, turning, running lights, reversing and—on the left light only—a licence plate light.

They’re wired in by hand, so plan for an installation rather than a quick plug-in swap.

How to use it

The four wires have separate jobs: white is ground, red handles the high-brightness brake and turn signals, black is for the lower-brightness running lights and the left-side licence plate light, and blue connects to the reverse lights. That gives you the wiring information up front, but you’ll need to connect the leads to your vehicle’s wiring because the lights don’t include a plug. The supplied wire length is 150mm, so consider how that fits your installation before starting.

Picture replacing a damaged trailer lamp and connecting each lead to the corresponding vehicle circuit: this set covers several rear-light functions without requiring separate units for each one. Is that the right trade-off? It depends on whether you’re comfortable doing the wiring and checking that each circuit works after installation.

Pros

The pair brings brake, turn, tail and reverse lighting together in each housing, while the left unit also provides a licence plate light. An IP67 rating is specified, and the smoked lenses give the lights a darker appearance than a clear-lens replacement. They’re listed for 12V trucks, trailers, boats, buses, lorries and vans, so the intended use extends beyond one vehicle type.

The main drawback is practical, not cosmetic: these aren’t plug-and-play. You’ll need to make the wire connections yourself, and the 150mm leads may affect how easily they reach your existing wiring. For YJ Wrangler and CJ models, including CJ-7, modifications may be needed because these aren’t described as factory-specific lights. Te conviene si you’re replacing a similar multi-function light and can handle a hardwired installation. No es para ti si you need a direct-fit lamp with a matching vehicle connector and no wiring work.

Spec sheet

• Type: Stop, turn, tail and backup/reverse lights
• Quantity: 2 lights
• LEDs: 33 per light
• Lens: Smoke
• Voltage: 12V
• Ingress rating: IP67
• Dimensions: 170mm x 145mm x 60mm
• Wire length: 150mm
• Licence plate light: Left side only
• Mounting: Stud mount

What I'd decide

This set makes more sense for a repair where you’re prepared to splice or otherwise connect the wires than for a straightforward factory-style replacement. Its range of lighting functions and stated IP67 rating are useful points if you need one housing to cover multiple rear signals, but neither removes the need to confirm that the mounting and wiring suit your vehicle. The product is described as compatible with various 12V vehicles, for the named YJ Wrangler and CJ applications, allow for possible modification rather than assuming a direct fit. A falta de ese dato, the listing doesn’t establish the exact fitment for every vehicle. Choose it when the dimensions, stud mounting and wiring approach work for your setup, look for a vehicle-specific, plug-in replacement if avoiding installation changes is the priority.