Mounting Dream MD2210 RV TV Mount, Full-Motion and Lockable, for 17–43-inch TVs
Product description
Where it shines
In a camper or motor home, the Mounting Dream MD2210 lets you angle a TV towards different seats, then pull it back towards the wall when it is not in use. Its full-motion arm swivels and tilts, while a one-step lock is designed to secure the arm and TV plate for travel. That makes it a more adjustable choice than a fixed wall mount for an RV or trailer. Fit is specific, though: the TV must meet the listed size, weight and VESA requirements, and the mounting board must be thicker than 1/2 inch.
Buyers often praise the mount’s ease of installation, adjustability and usefulness in campers. Some also appreciate that it locks for travel, one buyer’s feedback notes that the lock did not feel snug, so the locking mechanism is worth checking after installation rather than assuming every setup will feel identical.
Key takeaways
- Type: Full-motion RV TV wall mount
- Compatible TV size: 17–43 inches
- Maximum TV weight: 44 lbs
- VESA patterns: 75x75mm, 100x100mm, 200x100mm and 200x200mm
- Movement: Swivel, tilt and extension, up to +5°/-15° tilt
- Extension: Pulls out to 18.4 inches and retracts to 2.4 inches
- Material: Alloy steel
- What’s included: Installation hardware in labelled bags and instructions
The listed VESA patterns matter: a TV with a 100x200mm pattern is not included in this mount’s stated compatibility. The manufacturer points to the MD2212 for that pattern, but it is a different model. Also consider the vehicle’s mounting surface and any blocked TV inputs before choosing a position. A post-installation adjustment of +/-5 degrees is provided for levelling.
Everyday use
This mount suits a viewing setup where the TV needs to move between positions—for example, facing a dinette during a meal and turning towards another seat later. The arm can extend for viewing and retract closer to the wall afterwards, when the vehicle is moving, the pull strap releases or engages the lock. It is a practical alternative to a basic fixed bracket if changing the viewing angle is important, while buyers looking for a simpler, stationary installation may not need the extra movement.
Installation includes hardware and instructions, but the vehicle’s wooden board needs to be thicker than 1/2 inch. Confirm the TV’s weight and VESA pattern, and allow for the arm’s movement so it does not obstruct inputs. The product information lists a 10-year warranty, check its terms and availability for your purchase location.
Practical questions
Will it fit any 17–43-inch TV? Not necessarily. The TV must weigh no more than 44 lbs and use one of the four listed VESA patterns. Size alone does not establish compatibility.
Can the TV be tilted and swivelled? Yes. The mount swivels and offers tilt from +5° to -15°. Its arm also extends and retracts, giving more positioning flexibility than a fixed mount.
What should I check before installation? Confirm the TV’s VESA pattern and weight, make sure the wooden mounting board is thicker than 1/2 inch, and check for nearby inputs that could be blocked as the arm moves.
Final verdict
Worth considering if your RV or trailer needs a TV mount that can change viewing direction and tuck closer to the wall between uses. The lock, range of motion and stated support for TVs up to 44 lbs address common needs in a mobile setup, provided the TV and mounting surface meet the requirements. It’s not for you if your TV uses a 100x200mm VESA pattern, exceeds the weight limit, or your installation surface does not meet the stated thickness requirement. For a matching setup, the MD2210 offers more positioning options than a fixed bracket without requiring a separate mount for each viewing angle.