Mollor MO073-21 Tub and Tile Refinishing Kit, 35 oz White Semi-Gloss Paint

The 1 l Mollor MO073-21 kit pairs white acrylic paint with a semi-gloss finish for refreshing bathroom and kitchen surfaces. Its liquid format is intended for indoor use, with a listed coverage of 50–60 sq. ft.

Use it to refinish tubs, tiles, sinks, countertops, floors and walls. The recommended surfaces include ceramic, porcelain, metal and plastic, while the product description also names fibreglass and stone.

The kit is designed to bring the main refinishing supplies together, including paint, hardener, gloves, sandpaper, a 4-inch roller, tape, film, a stir stick and instructions. The water-based paint can be cleaned from tools and spills with water.

Key takeaways

A semi-gloss white finish gives worn or dated surfaces a fresh look without making replacement the centre of the project. The acrylic paint is described as low odour and low VOC, useful qualities for indoor refinishing in a bathroom or kitchen. Its waterproof specification and stated suitability for high-humidity bathroom environments make it relevant for tubs and tile as well as less exposed surfaces such as countertops.

The listed coverage is 50–60 sq. ft., so it can help with planning a focused refresh across a tub surround, sink area or countertop. For darker-coloured tiles, the product guidance recommends using two kits for multiple coats and a more uniform finish. Allow 24 hours for drying and full cure, as listed.

Buyers often describe the paint as straightforward to apply and appreciate the refreshed appearance it can give tubs and tiles. Some report adhesion concerns, and feedback about stain coverage is mixed. Careful surface preparation and following the included instructions are important parts of a refinishing project.

Quick sizing guide

The 1 l container is listed with coverage of 50–60 sq. ft. Use that figure to estimate whether your project is a small-area update or a broader surface refresh. For darker tiles, the product guidance calls for two kits when applying multiple coats, plan your coverage around the surfaces and finish you want to achieve.

Who it’s for

This kit suits homeowners and DIY renovators looking to update the appearance of bathroom or kitchen surfaces with white semi-gloss paint. It is a practical fit for projects involving ceramic or porcelain tile, a bathtub, a sink or a countertop, and it also lists metal and plastic among its recommended surfaces. The included roller and preparation items support a hands-on refinishing approach, while the water-based formula makes tool cleanup simple.

It offers a different route from replacing a tub or tiled surface: refinish the existing area instead. For example, a homeowner refreshing a bathroom could use it on a tub and surrounding tiles, then allow the stated 24-hour drying and cure time before treating the project as complete.

Before you decide

Which surfaces can this paint be used on? It is intended for indoor use and lists ceramic, porcelain, metal and plastic as recommended surfaces. The product description also names tubs, sinks, countertops, floors, walls, fibreglass and stone.

How much area does one container cover? The listed coverage is 50–60 sq. ft. Darker-coloured tiles may call for two kits when applying multiple coats for a more uniform finish.

How long does it take to dry? The listed dry time and full cure time are both 24 hours. Follow the included instructions as you prepare and apply the coating.

Should you buy it?

Choose the Mollor MO073-21 when you want a white, semi-gloss refinishing kit for an indoor tub, tile, sink or countertop project, with the core application supplies gathered in one kit. Its stated coverage helps with project planning, and water-based cleanup is a useful convenience for DIY work. It is especially suited to refreshing existing surfaces when a focused paint-and-refinish project is the approach you want.