LOHAS LED Night Light, 5000K

The LOHAS night light pairs a dusk-sensing switch with adjustable brightness, so it can provide a little guidance after dark without staying on all day. Its 5000K daylight-white light is intended for navigating familiar spaces, rather than lighting a whole room.

A front-mounted slider lets you set the output from 5 lm to 80 lm. That range gives you more control than a basic fixed-brightness plug-in light, though it remains a small night light, not a substitute for room lighting.

The two-pack format makes it possible to cover separate spots, such as a bedroom and the hall outside it. Leave more than 1 m between the lights to reduce the chance of sensor interference.

Key specifications

Each light uses a 1W LED and produces daylight-white light rated at 5000K. Brightness adjusts continuously from 5 lm to 80 lm using the slider on the front. This placement is useful when the neighbouring outlet is also in use, the listing says the control is not affected by the second socket.

An ambient-light sensor switches the light on in darkness and off in daytime. It can remain plugged in, so there is no need to remove it each morning. The listed lifespan is over 30,000 working hours. The compact design is described as leaving the lower outlet free, a practical detail for a hallway or bedside outlet where space matters.

Who it’s for

This setup suits someone who wants low-level light for a late-night trip to the bathroom, a child’s room, stairs, or a hallway, without manually switching a lamp on and off. The brightness slider is the main advantage over a fixed-output model: you can choose a softer glow for a bedroom or a brighter setting for a route through a darker space. Te encaja si you want automatic operation and a pair of small lights for separate locations.

The 5000K colour is daylight white, so it may feel cooler than a warm-toned bedside lamp. Quizá no encaja si you want cosy ambient lighting, illumination for reading, or a beam you can aim around the room. The listing does not specify a beam angle or a way to adjust the light’s direction.

What’s included

The product name identifies this as a two-pack of plug-in night lights. That lets you place one near a bedroom and another on a stair landing or in a hallway, provided the two units are kept more than 1 m apart. In a simple evening routine, the sensor can take over as the room darkens, the slider lets you set the brightness beforehand, rather than relying on one fixed level.

Before you decide

Does it switch on and off automatically? The built-in light sensor responds to the surrounding brightness, turning the light on at night and off during the day. The listing does not describe a timer or a manual on/off control.

Can the brightness be adjusted? Yes. Use the front slider to move continuously between 5 lm and 80 lm. This is a useful range for choosing a gentler glow or a more noticeable navigation light, but it is not intended to illuminate an entire room.

Can both lights go in nearby outlets? They can be used in separate locations, but keep more than 1 m between them. The listing warns that placing the lights closer together may cause sensor interference.

Final verdict

Choose this LOHAS two-pack if automatic dusk-to-dawn operation, adjustable output and a small plug-in format match the job. It offers more control than a simple fixed-brightness night light, while staying focused on navigation rather than general lighting. The main trade-off is the cool 5000K tone, along with the need to space the units apart. Based on what the listing says, it makes most sense for hallways, stairs and bedrooms where a modest automatic glow is enough.