DAOKI JK-US-072-CA USB Data Acquisition Module, 10-Channel 12-Bit ADC
Product description
For MCU projects that need multiple analogue inputs and a USB-connected serial interface, the DAOKI JK-US-072-CA combines a 10-channel, 12-bit ADC with UART communication. Its USB connection lets a desktop or laptop serve as the computer-side link, while the included 15-pin cable supports connection to an MCU setup.
It also emulates a standard serial port, making it useful for adding USB connectivity to serial-based projects.
Spec sheet
- Name: DAOKI USB data acquisition module
- Model: JK-US-072-CA
- Type: 10-channel, 12-bit ADC module with UART communication
- Connectivity: Full-speed USB device interface, compatible with USB 2.0
- Operating system: Windows
- Baud rate: 50 bps to 2 Mbps for serial communication
- Power: Supports 5 V and 3.3 V supply voltage
The module provides a full-duplex serial port with built-in send and receive buffers. It supports common MODEM signals, including RTS, DTR, DCD, RI, DSR and CTS. With additional level-conversion devices, it can provide RS232, RS485 or RS422 interfaces. IrDA standard SIR infrared communication is also supported, at baud rates from 2,400 bps to 115,200 bps. CH341 software compatibility allows use of the CH341 driver.
Who it’s for
This module is suited to makers and developers connecting an MCU project to a computer for data acquisition or serial communication. The 10-channel, 12-bit ADC provides multiple inputs for a measurement setup, while UART communication gives the project a serial data path. For example, a Windows computer can connect over USB to a project that needs serial communication or to a setup that gathers readings through the module.
Need to add a USB serial connection to an existing design? The standard serial-port emulation is intended for upgrading serial peripherals or adding a serial port over USB. The product information also describes compatibility with Windows serial applications without modification, which can help keep an existing computer-side workflow in place. It’s a good fit if your project calls for the module’s specified ADC channels and UART communication, with USB as the computer connection.
In the box
The package includes the USB data acquisition module, a USB extension cable and a 15-pin cable. These provide the module and connection leads for setting up a USB-linked MCU project, the 15-pin cable is specifically identified for use with an MCU.
Buying verdict
Choose the DAOKI JK-US-072-CA when a project needs a multi-channel ADC module with UART communication and a USB link to a Windows computer. Its combination of 10 channels, 12-bit conversion, full-duplex serial communication and support for both 5 V and 3.3 V supply voltages makes it relevant to MCU data-acquisition and serial-interface work. The included extension cable and 15-pin cable help bring the module into a practical computer-connected setup.