Art3d A17042 Peel-and-Stick Wall Tiles, Grey Marble Look, 12" x 12

For a kitchen or bathroom backsplash refresh, Art3d’s grey marble-look peel-and-stick tiles offer a self-adhesive way to update a wall without grout or separate glue. The embossed texture adds dimension, while the square sheets can be cut and trimmed to fit around the area you’re finishing.

Each sheet measures 12" x 12", with an actual coverage area of 11.5" x 11.5" excluding the overlap. The water-resistant, stain-resistant finish is designed for indoor wall use, including kitchen and bathroom backsplashes.

Technical details

• Type: Peel-and-stick wall tile
• Model: A17042
• Colour and pattern: Grey marble look
• Format: Square sheets with embossed texture
• Sheet size: 12" x 12"
• Actual coverage per sheet: 11.5" x 11.5", excluding overlap
• Quantity: 10 sheets
• Recommended use: Indoor walls, including kitchen and bathroom backsplashes
• Features: Lightweight, water-resistant and stain-resistant

Tips for day-to-day use

Start with a smooth, clean wall surface so the adhesive can make contact evenly. Dusty or porous finishes, raised texture and uneven or damaged walls can affect adhesion, the tiles are intended for smooth surfaces. Peel and stick each sheet into place, trimming it as needed for edges and corners. The self-adhesive format means there’s no grout or separate glue to apply, and the flexible sheet can be used around a round corner.

For routine care, the surface is designed to be wiped clean, making it practical for backsplash areas where splashes and marks need attention. Keep the tiles away from direct flames or steam, and don’t use them where they may be submerged in water or as a countertop or other working surface.

Customer feedback often highlights the appearance and the ease of cutting and applying the sheets. Experiences with adhesion and colour vary, and some buyers mention peeling or tearing. Preparing a suitable smooth surface and placing the sheets carefully are useful steps for a neat finish. If you’re weighing a grout-based tile project against a self-adhesive wall finish, would a simpler, cut-to-fit format suit the update you have in mind?

What you get

The pack contains 10 grey marble-look sheets. Their 12" x 12" format provides a broad square tile face, while the stated actual coverage is 11.5" x 11.5" per sheet once the overlap area is excluded. Plan the layout around that coverage and trim sheets where the wall layout calls for it.

Before you decide

What surfaces are suitable? These tiles are intended for smooth wall surfaces. Dusty or porous walls, raised or uneven finishes and damaged surfaces can compromise adhesion. They are not intended for areas with direct steam or flames, submerged use, floors or countertops.

How are the tiles installed? Peel off the backing and apply the self-adhesive sheet to the wall. The sheets can be cut and trimmed, and the installation does not require grout or separate glue.

How can a tile be removed? Warm the adhesive with a hairdryer, then pull the tile gently, starting at a corner. A cleaning product can be used to remove adhesive residue.

Final verdict

Art3d A17042 is suited to an indoor backsplash or wall update where a grey marble look, embossed texture and a peel-and-stick format are the priorities. Its 10 cuttable sheets make it a practical choice for a defined kitchen or bathroom wall area, with straightforward application and wipe-clean care.