Zahawn Colorado & Canyon Crew Cab Running Boards, Raised Step, 580-lb Capacity
Product description
At 80 x 6.9 x 5 inches, these Zahawn running boards add a wide, ridged step surface along the sides of compatible Chevy Colorado and GMC Canyon Crew Cab trucks. Their black powder-coated carbon steel construction pairs a rugged tubular profile with a raised center platform, giving you a practical foothold for both everyday entry and reaching roof-mounted gear.
The set includes two running boards, vehicle-specific mounting brackets, installation hardware, and instructions. The boards are designed for Crew Cab models with four full-size doors from 2015 through 2026.

Best use cases


Use the main step to make getting in and out of the truck more comfortable, particularly when a lifted stance or oversized tires make the cab harder to reach. Raised pads at the center sit approximately 5 inches above the main step surface, providing an additional foothold when loading or organizing roof racks and cargo carriers. For example, the platform can help when you need a higher step to reach equipment secured above the cab.

The wide surface has anti-slip ridges for footing, while its cutout design helps reduce the buildup of water, mud, sand, and debris. That layout suits trucks used on roads and trails where footwear and side steps may encounter loose dirt or wet conditions. The black finish and blue logo add a distinct accent while following the truck’s body lines.
Why it’s worth it



These boards combine an entry step with a raised center platform, so one side accessory serves both cab access and elevated loading tasks. The structure uses high-strength carbon steel, a 2.4-inch (60 mm) tube, and one-piece welded construction. Each board supports up to 580 pounds. A corrosion-resistant powder coating helps resist rust and scratches, while the tubular shape also helps shield the rocker panels and lower body from gravel, road debris, brush, and minor side impacts.
Compared with a basic, single-level step, the raised-pad design gives you a higher foothold near the center when reaching roof-mounted items. It also keeps a broad stepping area available for regular entry and exit, making the design useful for owners who want both functions rather than a step focused on cab access alone.

What to know


Fitment is for 2015–2026 Chevrolet Colorado and GMC Canyon Crew Cab trucks with four full-size doors. The brackets align with factory mounting points, and installation requires no drilling or major modification. Using basic hand tools, align the brackets and secure the boards with the included hardware. The package contains two boards, vehicle-specific brackets, hardware, and installation instructions. A one-year warranty and customer support are also provided.

When it makes sense

You’ll appreciate it if you regularly climb into a taller truck, carry gear on the roof, or want a defined step that also helps protect the lower body from everyday road debris. The raised platform is especially useful when a standard step does not provide enough height for reaching roof-mounted cargo. For a matching fit, choose this set for the specified Colorado or Canyon Crew Cab configuration, its combination of a ridged main step, elevated center pads, and black steel construction makes it a practical addition for daily driving and gear-loading tasks.
Products with discounts that might interest you
- Energy Suspension Engine and Transmission Mount Set 3.1120R
- BDFHYK 938-134 Front Drive Shaft Assembly for 2003–2006 Jeep TJ/Wrangler 4WD
- GM Genuine Parts 24259848 Automatic Transmission 1-2-3-4 and 3-5-Reverse Clutch
- TURFPULSE 604817 Lawn Mower Deck Belt, 5/8" x 143.75
- Yukon Gear & Axle YA F750001 4-Lug Rear Axle for Ford Thunderbird/Cougar/Mustang 7.5/8.8 Differential (1541H Alloy)
- Yukon YC F880500 28-spline carrier case
- Yukon Gear & Axle YG D30SR-411JK ring and pinion 411
- Omix Transfer Case Shift Fork NP231
- Yukon Gear & Axle 3.73 Ratio 26-Spline Pinion Ring & Pinion Set for Dana Spicer 30 (Short Pinion)
- Yukon Gear & Axle Differential Yoke, 1350 U-Joint
- Yukon YA D2002692 Outer Stub Axle 10yr
- ATP Automotive Shift Cable Y-747
- Yukon YPKF8.8-P-31 Positraction 31-spline 🛠
- Yukon Hardcore Differential Cover for Model 35 Differentials
- Yukon Gear & Axle Dura Grip Rear Limited Slip Differential (Positraction), YDGC9.25-31-1 — 31 Spline for 9.25" Chrysler/Dodge/PLYM Axles
- GM Genuine Parts TF938 Automatic Transmission Fluid Filter Kit with Seal (24298004)
- Yukon YK GM9.5-B Master Overhaul Kit 🛠
- ATP Automotive ATP Z-298 Manual Transmission Flywheel
- Yukon YY C4529481 yoke 2.125" 🛠
- Yukon Gear & Axle YG F9-411 Ring & Pinion 9️⃣ ⚙
- Yukon YA M35C-27-R Rear Axle 29.25 in
- Yukon YY C52105064 Flange Yoke 1.629 kg
- Replacement Carrier Shim Kit for Dana 70 & 70HD differentials
- Yukon YG D80-488 ring & pinion 4.88

