Xprite 30 LED Amber Forklift Beacon Strobe Light (10-110V) – 4-Pack
Product description
Quick overview
If you need a visible warning beacon for work vehicles, the Xprite amber strobe light is built around one job: make hazards easier to spot from a distance. It uses a total of 30 high-brightness SMD 5730 LEDs and is designed for 360-degree coverage, so you’re not relying on one direction of visibility. It’s meant to be mounted permanently and wired to a 10–110V power source.
On paper, it checks a lot of the practical boxes—self-contained LED (no external flasher required), weatherproof exterior mounting, and an encapsulated build intended to protect against moisture, dust, and vibration. Still, there’s one limitation to keep in mind: it’s a strobe pattern device, so if what you’re after is steady lighting (not flashing) for a specific use case, you may want to look elsewhere.
What you’ll notice in real use
The big day-to-day benefit here is visibility. With 360-degree coverage and an amber output, the light is aimed at warning and hazard signaling for vehicles and equipment that operate around people—think job sites, postal or security environments, or emergency-style needs.
The flashing behavior is also straightforward: it runs 3 bright flashes with 1 second in between. That rhythm is the whole point of a strobe—drawing attention quickly compared to a slower or less noticeable signal. For example, imagine mounting one on a forklift or utility cart: even in a busy lot, the repeated bright flashes give nearby workers a consistent cue that something is operating nearby.
Key takeaways for buyers
This one is designed to be durable and “install-and-forget,” not something you constantly adjust. The polycarbonate dome and PC lens are paired with an ABS plastic base, which is described as impact and shock resistant with weatherproof exterior mounting. There’s also a removable dust cover for easier maintenance, which is a small detail but can matter when you’re dealing with outdoor grime.
It’s also positioned for people who don’t want extra components in the wiring plan. Because it’s self-contained and does not require an external flasher, installation can be simpler than beacon setups that depend on a separate module.
Tech specs (the stuff you actually need)
- Name: Xprite 30 LED Amber Forklift Beacon Strobe Light
- Type: Warning beacon strobe light (flashing)
- Pattern: 3 bright flashes with 1 second in between
- Coverage: 360 degrees
- LED count: 30 SMD 5730 LEDs
- Power input: 10–110V
- Mounting: Permanent mount with screw mounting base and screw-in assembly
- Cable length: 13.5IN (350 MM) positive/negative hard cable
- Dome/lens: Low polycarbonate dome, durable PC lens
- Lens maintenance: Removable dust cover
- Dimensions: Dia. 1.33" (3.38 cm) * H: 5.24" (13.31 cm)
- Base diameter: 3.86" (9.80 cm)
Where it shines—and where it may not
It makes sense if your goal is clear hazard signaling on 10–110V equipment where you want flashing amber warnings. The listed use cases include emergency workers, postal service, construction vehicles, security hazard warning, and other emergency needs.
However, you may want to skip it if you’re trying to build a system that needs a non-flashing light mode, or if your setup can’t support a 10–110V power source. Also, while the product is described as weatherproof and encapsulated against moisture, dust, and vibration, you still have to mount it correctly and manage wiring exposure in your environment for the “weatherproof-ready” benefit to fully land.
Should you buy it?
Worth considering if you’re buying a simple amber strobe beacon for vehicles like ATVs, tractors, trucks, golf carts, UTVs, or similar equipment where high visibility and a repeatable flashing pattern matter. The self-contained design (no external flasher required) and 360-degree coverage are the main reasons this works as a practical warning light.
It may not be the best choice if you need steady illumination, a different flash behavior, or you don’t have a 10–110V power plan. In that case, you’ll likely spend time troubleshooting compatibility rather than improving safety.
Mini FAQ
What flash pattern does it use?
It runs 3 bright flashes, then pauses with 1 second between cycles.
Does it need an external flasher?
No. It’s described as self-contained, so it’s intended to work without an external flasher module.
Is it meant for outdoor mounting?
It’s described as weatherproof-ready for exterior mounting and encapsulated to protect against moisture, dust, and vibration.
How is it mounted?
It’s intended for permanent mounting, using a screw mounting base and a screw-in assembly.
What vehicles is it designed for?
The application list includes emergency workers, postal service, construction vehicles, security hazard warning, and other emergency needs, including common vehicle categories such as forklifts and tractors.