VEVOR RV Awning Fabric Replacement, 17'2
Product description
If your priority is replacing worn awning fabric rather than upgrading the whole setup, this VEVOR replacement is designed to restore shade over an RV’s outdoor area. Its three-layer PVC construction and stated UV protection target practical use in sun and rain, while the blue fade finish gives the canopy a visible color treatment. The key buying question is fit: the product name specifies 17'2" fabric for an 18' awning, but the supplied description instead refers to 20.2 ft fabric for a 21 ft awning. That mismatch matters, so confirm the actual fabric length and roller measurements before ordering.
Best use cases

This replacement is aimed at RV, trailer, and motorhome owners whose existing awning fabric needs replacing and who want a covered spot for sitting outside, eating, or keeping direct sun off the entry. Picture setting out chairs beside the RV on a sunny afternoon: the canopy is meant to create a shaded area without replacing the roller assembly. Its waterproofing and UV-protection claims also make it relevant for trips where the awning may see both bright sun and rain, though the details do not establish a particular awning brand or system as compatible.


It’s a great fit if you can match the fabric to your roller and want a multi-layer PVC replacement rather than a basic, single-layer cover. It’s not for you if you need a guaranteed fit without measuring, or if you’re looking for a complete awning system instead of fabric.

Product specs
The listed construction is 16 oz, three-ply PVC: an outer PVC-and-talc layer, a polyester wire-mesh middle layer, and an inner PVC coating. The fabric is described as waterproof, with a 3000 mm pressure rating, and rated UPF 50+, the description says it blocks more than 95% of UV rays. It also gives tensile strength of 1300 N/5cm in both directions. These are product claims, not independent performance results.



The polycord is specified for roller grooves measuring 0.16–0.17 inches (4.0–4.2 mm), and reinforced stitching runs through stress points. The product name lists a 17'2" fabric length for an 18' awning, while the description gives a different length and awning size. From the way it is set up, correct measuring is central to avoiding installation trouble: the supplied guidance says to measure between the centers of the left and right support arms on the roller, rather than relying on old fabric or roller measurements.
Where it shines

The layered build is the main practical draw. The mesh layer is intended to add strength, while the outer layer is described as helping with sun protection and the inner PVC coating completes the weather-resistant construction. For a campsite, that combination is aimed at making the space beside the RV more usable during the day and providing cover when light rain starts. The listing also describes the fabric as easy to clean and resistant to fading, but it does not provide care instructions beyond mentioning washing-machine cycles.


Compared with choosing a simpler cover based mainly on basic shade, this fabric emphasizes UV protection, water resistance, and reinforced attachment points. Would those extras matter more than a straightforward replacement? They may if the awning is used regularly outdoors, they matter less if your priority is simply finding fabric that matches an existing roller at the lowest complexity.

When it makes sense
Consider it when your measurements match the fabric and roller groove specifications, and you want replacement material with stated protection from sun and rain. The groove size and polycord information offer useful fit checks, but they do not resolve the conflicting length details or confirm compatibility with a particular RV awning system. Check the measurements against the actual roller before making a decision.

Choose a different route if you cannot verify the dimensions, need confirmed compatibility with a named awning system, or want more complete installation guidance than the listing provides. If the fit checks out, its layered PVC build and reinforced stitching make the most sense for restoring a shaded outdoor area, if the listed size remains unclear, that uncertainty is a good reason to pause rather than guess.
Products with discounts that might interest you
- FLORICH Front Seat Covers, 2-Piece
- Truckiipa Front Seat Covers Faux Leather
- Truckiipa Ram Seat Covers Leather
- Truckiipa Ram Front Seat Covers, Gray
- Covertopia Front Seat Covers Faux Leather
- Coverado Front Car Seat Covers in PU Leather
- Coverado Car Seat Covers 5-Seat Set
- Coverado Car Seat Covers Air Mesh
- Huidasource Chevrolet Malibu Seat Covers, Faux Leather
- DuDuWang Car Seat Covers, Faux Leather
- Umbrauto Truck Seat Covers in Nappa Leather
- Covercraft Truck Seat Covers SS3457WFGY
- Coverado Front Seat Covers for Ford F-150
- Coverado Car Seat Covers in Nappa Leather
- Huidasource Car Seat Covers Faux Leather
- Coverado Leather Car Seat Covers
- Coverado Car Seat Covers for Two Front Seats
- Coverado Car Seat Covers 5-Seat Waterproof
- Coverado Universal Front Seat Covers, 2 Pack
- Coverado Car Seat Covers Full Set
- Coverado Front Seat Covers (Beige) — Luxury Faux Leather Waterproof Car Seat Protectors for Front Seats
- Coverado Leather Car Seat Covers Full Set
- FREESOO Black Car Seat Covers Full Set – Faux Nappa Leather, Breathable & Waterproof with Lumbar Support
- Huidasource Truck Seat Covers Faux Leather

