Uijokdef Embroidered Virginia Flag Patch, 3.15 x 2 Inch

The choice to iron this embroidered Virginia flag patch on or sew it in place gives you two ways to attach it, depending on the garment and how secure you want the finish to be. Its 3.15 x 2-inch size makes it a visible accent for a jacket, backpack, hat, or DIY clothing project without taking up a large area. One patch is included, and the listing describes detailed stitching and colors, the key practical distinction is that ironing is recommended for linen and cotton, while other materials call for sewing.

Key specifications

This is an embroidered Virginia flag patch measuring 3.15 x 2 inches, with a stated size tolerance of 3%. The package contains one patch. It can be applied with an iron or sewn on, but the suggested method depends on the fabric. The instructions recommend ironing on linen or cotton and sewing the patch onto materials such as sweaters, leather, mesh, and smooth or rough fabrics. No specific thread, needle, or iron model is listed.

For the iron-on method, place the patch where you want it and cover it with a light-colored, thin cotton cloth. Set the iron to about 150 degrees, press with slight force for 20–30 seconds, then let the patch cool for five minutes. The instructions also suggest adding a few stitches around the edge if you are concerned about the bond holding firmly. Since the temperature unit is not specified, that detail is worth treating carefully rather than assuming a setting from another guide.

Who it’s for

A solid pick if you want to add a Virginia flag motif to a jacket, jeans, shirt, hat, shoes, or backpack, or use a small embroidered piece in a craft project. It suits someone who is comfortable choosing an attachment method: iron-on for the recommended cotton or linen fabrics, or needle-and-thread for materials where heat application is not advised. For example, you could position it on a backpack pocket, cover it with the recommended cloth, press it, and let it cool before deciding whether to reinforce the edge with stitches.

It might not be a great match if you need several patches, a different state flag, or a stated guarantee that the iron-on adhesive will work on every fabric. The listing recommends sewing rather than ironing on several material types, so this is not a one-method solution for every garment. If you want a patch for a surface you cannot sew through, the provided guidance leaves less certainty about attachment.

What you get

The package includes one embroidered Virginia flag patch. Its listed size is compact enough for a focused clothing or bag accent, but the listing does not specify a backing material or provide details about the patch’s exact fiber composition. It describes the construction as sturdy and intended to resist fading or fraying, though no testing information is provided. From the way it is set up, the most dependable choice for a fabric outside the recommended iron-on group is to sew the edges down rather than rely on heat alone.

Questions before you buy

Can it be ironed onto any fabric?

The instructions recommend ironing on linen and cotton. For sweaters, leather, mesh, and smooth or rough fabrics, they recommend sewing it on instead.

How long should the iron press on the patch?

The supplied directions say to press lightly for 20–30 seconds through a light-colored, thin cotton cloth, then allow five minutes to cool. They specify about 150 degrees but do not state a temperature unit.

How many patches are included?

One patch is listed in the package, measuring 3.15 x 2 inches with a stated 3% size tolerance.

Final verdict

This patch makes sense for a single Virginia-themed clothing or bag detail, especially if you can sew it on when the fabric is not suited to the recommended iron-on method. The two attachment options add flexibility, but the ironing instructions are fabric-specific and leave the temperature unit unstated. Choose it for a small embroidered accent and be prepared to sew for a more secure fit, look elsewhere if you need multiple patches or a clearly specified heat-bonding method for a particular material.