TOYOCO Car Window Tint Film, 20% VLT
Product description
A darker tint can add privacy to a car’s side and rear windows, while a lighter film may be easier to see through at night. The TOYOCO roll uses a 20% VLT shade and is designed for interior, do-it-yourself installation on those windows—not the front windshield. It also has a nonmetallic construction, which is intended to avoid interfering with GPS, cell phones, and toll tags. The roll measures 36 in x 25 ft, so planning your cuts and checking local tint rules are important before you start.
Quick overview

This is a heat-shrinkable ceramic window tint film with UV and infrared rejection, scratch-resistant film, and a dark 20% VLT finish. Those features are aimed at drivers who want added privacy and help managing sunlight and heat through the side and rear glass. The nonmetallic design is a practical distinction if you use signal-dependent devices in your vehicle, metallic films can be a concern for buyers who want to avoid that kind of interference.
The roll format gives you material to cut for your windows rather than pre-cut panels, so it offers flexibility but also puts the measuring and fitting work on you. A step-by-step video is provided to guide planning, cutting, shrinking, and application. It makes sense if you’re comfortable with a hands-on project and want one film for side and rear windows. Keep in mind that a 20% VLT shade may not be legal on every window in every location, and this product is not intended for the front windshield.



How to use it
The film is applied to the inside of thoroughly cleaned glass using a wet-application process. After cutting it to fit, the material can be heat-shrunk to shape, then left to cure fully. That sequence matters: dust or residue beneath the film can affect the finished appearance, and rushing the cure can work against the intended result. The included video guidance can help you understand the steps, but the product details don’t specify tools or a curing time, so don’t assume either is included or fixed.

A careful DIY setup is a better fit than buying film for a quick, no-prep installation. Not the best choice if you need a ready-to-install fit or are tinting the windshield, the stated use is limited to side and rear windows.
Practical tips



Before opening the roll, check the rules for each window you plan to tint, including any local VLT requirements. Legal limits can differ by location and window position, so a shade that suits one vehicle or area may not suit another. Measure the glass and plan your cuts first, the 36 in x 25 ft roll size gives you a defined amount of material, not a guarantee that it will cover every vehicle’s windows.
For a more controlled install, work with clean glass and take time with the wet application rather than trying to rush from one window to the next. For example, you can test your cutting and placement on a side window before moving on to the rear glass. The film is described as scratch-resistant, but that does not mean it cannot be damaged during handling or installation. If a clean, seamless finish matters more than doing the work yourself, a professionally installed or pre-cut approach may be a better match.

Before you decide
Can I use this film on the front windshield? No. The stated application is for side and rear windows only.



Will it interfere with GPS or toll tags? Its nonmetallic construction is designed to remain signal-friendly for GPS, mobile devices, and toll tags.
What does 20% VLT tell me? It identifies the film’s shade level. Check your local requirements before choosing it, since permitted tint can depend on the window and location.
Final verdict
This TOYOCO tint is worth considering if you want a dark, nonmetallic film for a DIY side- and rear-window project, and you’re prepared to measure, wet-apply, shrink, and let it cure. Its roll format and video guidance give you room to work through the installation, while the 20% VLT shade and windshield restriction make legal fit a key part of the decision. Choose another approach if you need front-window coverage, pre-cut pieces, or a professionally finished installation without doing the fitting yourself.
Products with discounts that might interest you
- OGLAND 20" Genuine Australian Sheepskin Car Seat Cover
- Vepagoo 20% VLT Ceramic Car Window Tint Film (20" x 20FT) — One-Way Daytime Privacy, No Signal Interference, 99% UV Protection
- IAQWE 5% VLT Ceramic Car Window Tint Film (20" x 20ft Roll) — Black, Heat & UV Blocking Privacy Film
- Stalwart 12V Heated Blanket for Car Camping
- Alien Sunshade Jeep Gladiator Sun Shade 2018–2023 🚙
- RadiantDecor Premium Black Suede Fabric Wrap — 30x60 inch, Self-Adhesive Microfiber & Synthetic Leather Solution
- Vepagoo 3% VLT Ceramic Window Tint for Car — 20 in x 30 ft, Daytime Privacy and Heat Rejection
- RadiantDecor Premium Black Suede Wrap 17x70 inch
- ZIKEE All-Season Car Seat Cushion for Sciatica Relief
- TOYOCO 5% VLT Ceramic Window Tint for Cars (24" x 25')
- TOYOCO Window Tint Film for Cars, 70% VLT, 36" x 25' Ceramic Window Tint
- KUST Car Window Shades for Ford Escape 2020–2026
- LUCKYMAN CLUB 2 Front Tacoma Seat Covers – Custom Fit for 2016-2021 Tacoma Crew/Extended Cab (Black, 2 pcs)
- Car Window Shades 2 Pack, 39x19 Mesh
- Mega Racer Thin Metal Black License Plate Frame, Matte Black Aluminum, Slim Edge
- FLORICH Front Seat Covers, Nappa Leather
- NAZZO Car Visor Extender Sun Blocker
- ARISMOTOR Ford F-150 Sun Shade 2021–2026
- NBTEPEM NBTEPEM-Bling car accessories set 27, Purple 27-Piece Bling Car Set
- JOYTUTUS Center Console Cover for 2015-2026 Ford F-150 and 2017-2026 F-250/F-350/F-450 (40/20/40 Jump Seat)
- Rico Industries NFL Seattle Seahawks Secondary License Plate Frame (12" x 6")
- PeakPurit Windshield Sun Shade for 2014–2018 Silverado 1500 & Sierra 1500
- Rilsen Dashboard Cover Mat for Hyundai Sonata 2011–2014
- OPT7 Aura Double Row Car LED Lights Interior Kit (6pc) with Wireless Remote, Multicolor & Sound-Active Ambient Lighting

