Tervis Traveler NHL MVP 30oz Triple-Insulated Stainless Steel Tumbler with Slider Lid
Product description
Quick overview
If you’re tired of travel cups sweating all over your car console or losing temperature the moment you pull out of the driveway, the Tervis Traveler NHL MVP tumbler is built for that exact daily problem. It’s a stainless steel travel cup with triple insulation, a slider lid that’s described as leak resistant, and a quiet nonslip base meant to stay put instead of skittering around.
On paper, this one is aimed at people who want a “grab-and-go” cup for coffee, water, or other drinks without treating it like a fragile accessory. The NHL-themed print is part of the fun, but the practical stuff—insulation performance, easy lid use, and dishwasher-safe cleaning—is what tends to matter week after week.
What you’ll notice in real use
The biggest day-to-day win here is temperature retention plus reduced condensation. The brand states triple insulation helps keep drinks hot for up to 8 hours or cold for up to 24 hours, which is the kind of range that can actually cover a commute, a workday, or errands without constant refilling. It also aims to reduce condensation, so you’re less likely to deal with the wet cup ring problem.

There’s also a “behavior” focus: a quiet, nonslip base designed to prevent noisy slipping and sliding. That’s a smaller feature, but it can be noticeable if you’ve ever had a tumbler slide when you hit a bump.
And for the lid: the slider lid is described as BPA-free, leak resistant, easy to open and close, and easy to clean. For travel cups, that combination matters because a hard-to-use lid usually turns into “I won’t bother bringing it next time,” even if the insulation is great.
One quick limitation to keep in mind: the description specifically advises caution with hot liquids. So while it’s designed for hot drinks, it’s not a license to get careless in transport.
Where it shines (and what to expect)


A clear strength is the materials and how they’re handled. The tumbler uses copper-lined 18/8 stainless steel, and the description says it won’t retain tastes or odors. That can be a big deal if you rotate between coffee, tea, and flavored drinks and don’t want yesterday’s flavor hanging around.

The durability angle is also part of the pitch: DuraPrint technology is described as chip-resistant, peel-resistant, and dishwasher safe. If you’ve bought printed tumblers before and watched the design fade or flake after a few cleaning cycles, this is the kind of detail worth paying attention to.
Finally, there’s a practical fit detail: it’s designed to fit most cup holders for on-the-go convenience. That doesn’t guarantee every vehicle and every cup holder shape will match perfectly, but it’s a reasonable design target for car use.
Tech specs (key details)
Tech specs
- Name: Tervis Traveler NHL - MVP Triple Insulated Tumbler Travel Cup
- Type: Triple insulated stainless steel travel tumbler
- Capacity: 30oz
- Material: Copper-lined 18/8 stainless steel
- Lid: Slider lid (BPA-free), described as leak resistant
- Base: Quiet, nonslip base
- Insulation performance (stated): hot up to 8 hours, cold up to 24 hours
- Print durability tech: DuraPrint (chip-resistant, peel-resistant, dishwasher safe)
- Care: Dishwasher safe (for the tumbler, follow lid/parts guidance as applicable)
- Guarantee: limited 2-year manufacturer guarantee

Who it’s for (and who should skip it)
It’s a strong match if you want a stainless travel tumbler with long-ish temperature holding, reduced condensation, and a lid that’s easy to operate. You’ll likely appreciate the quiet nonslip base if you use it in the car or at a desk and don’t want it sliding or clattering.
It may not suit you as well if you’re looking for something “ultra compact” for tight cup holders, or if you prefer a different lid style (this one uses a slider). Also, if you’re the type who routinely tosses hot drinks around without being careful, the hot-liquid caution is worth taking seriously.


It tends to sit in the more dependable, mid-to-practical end of the travel-cup spectrum—especially for people who care about printed durability and easy cleaning—rather than chasing anything flashy beyond the insulation and lid design.
Care & maintenance

Since the description calls out DuraPrint as dishwasher safe and the lid as easy to clean, day-to-day maintenance should be pretty straightforward. Still, for best results, it’s wise to follow any care instructions included with the tumbler, especially for hot-liquid use and any parts that might need extra attention.
Should you buy it?
Should you buy it?
Buy it if you want a 30oz stainless steel travel tumbler that’s built around triple insulation (hot up to 8 hours, cold up to 24 hours as stated), a slider lid that’s BPA-free and described as leak resistant, and a design that aims to reduce condensation. The chip/peel-resistant DuraPrint and copper-lined 18/8 stainless steel also make it a practical choice for anyone who rotates drink types and wants the flavor/odor situation to stay clean.
Skip it if your priority is a no-caution, “hot drinks at full speed” kind of tumbler, or if you know your cup holder setup is unusually tight and you can’t rely on “fits most cup holders” as a guideline. Also, if you mainly want the cheapest travel cup possible, this one’s more about durability + insulation + usability than being a basic disposable-style alternative.

Mini FAQ
Mini FAQ


Is the slider lid leak-proof?
The description says the slider lid is leak resistant, not leak-proof. If you transport it horizontally or with very full fill levels, you’ll still want to use caution.
How long will it keep drinks hot or cold?

The brand states it keeps drinks hot for up to 8 hours and cold for up to 24 hours. Always use caution with hot liquids.
Can I put it in the dishwasher?
The description notes DuraPrint technology is dishwasher safe, and it’s positioned as easy to clean overall. If parts have separate guidance, follow the instructions included with the product.
Does the tumbler help prevent condensation?
Yes—triple insulation is described as reducing condensation. That doesn’t mean zero moisture in every environment, but it’s meant to noticeably cut down on the “sweating” effect.
Is the printed design durable?
According to the description, DuraPrint is chip-resistant, peel-resistant, and dishwasher safe—so the NHL-themed print is treated as part of the durability plan.
Products with discounts that might interest you
- 2 Gallon Glass Beverage Dispenser with 18/8 Stainless Steel Spigot and Lid
- EALGRO 32 oz Glass Water Bottle with Straw, Handle & Silicone Sleeve (Black)
- Meoky Stainless Steel 24 oz Bottle 🥤
- Ello Hydra 64oz Vacuum Insulated Jug
- KIVY Glass Water Bottle 32 oz with sleeve
- Encool Stainless Steel 40 oz Insulated Bottle 🚰
- ZeroWater 23-Cup Dispenser 5-Stage Filter
- Hydrapeak x NBA Officially Licensed Los Angeles Lakers 32oz Nomad Stainless Steel Tumbler with Handle & Straw Lid
- NETANY Glass Carafe Set 1 L 🥤
- IRON °FLASK Dream Sunset 22 oz hydration 🥤
- AOZITA 64 oz Glass Pitcher with Filter Lid 🥤
- Lamosi 300 Pack Paper Cups 8 oz 🥤
- Luxfuel Clear Glass Bottles 18 oz reusable bottles
- purifyou 32oz Borosilicate Water Bottle
- SIUQ 600 Pack 4 oz Disposable Paper Cups for Mouthwash, Drinks, Medicine & More
- YETI-Compatible 20 oz Tumbler Lid 2-Pack 🥤
- Tervis EttaVee “Oh What Fun” Double-Walled Insulated Tumbler Travel Cup, 16oz
- Tronco 20 oz Glass Tumbler with Lid and Straw
- KIVY Glass Water Bottle 32 oz
- KIVY Glass Water Bottle 32 oz 🥤
- CIVAGO 40 oz insulated water bottle
- Stanley Classic Legendary Vacuum Bottle 1.5 qt (Wide Mouth) with Leakproof Cup Lid
- EALGRO 40 oz Tumbler with Handle
- BJPKPK 64oz Insulated Water Bottle 💧

