Tailgate Molding Rivet Retainer Clips, 7 mm

Quick overview

When a tailgate molding or trim panel is missing a fastener, the panel can be left loose and a replacement clip may be a straightforward repair. This set contains 30 black plastic push-in retainers intended for compatible Ford F-150, F-250, F-350, and F-450 applications. Each clip is specified for a 7 mm mounting hole, with a 16 mm head and 21 mm overall length. The expanding tabs are designed to lock in place when the center pin is pressed, so the key buying question is fit: the listed vehicle family alone may not identify the right clip for every trim position or model year.

These retainers are described for tailgate molding, interior door panels, and other compatible trim. They can serve as replacements for worn, broken, or missing fasteners in DIY maintenance or body-shop work. The pack quantity is useful when several clips need replacement, but buying a larger set does not remove the need to match the original fastener and mounting hole.

How to use it

Check the existing clip, if available, against the stated dimensions and the mounting hole before installation. The product listing also references Ford part number N807673-S, use that as a fitment clue, not as a substitute for confirming the application. Ten minutes spent comparing the old retainer with the new one can help avoid forcing a clip into an incompatible opening.

For installation, align the retainer with the panel hole and press it into place, the center pin expands the lower locking tabs. Avoid treating it as a universal fastener or assuming that a Ford badge guarantees a match. Tenants? No. If the fit is uncertain, identify the exact trim location and vehicle application before relying on the listed compatibility.

Practical tips

A useful real-world check is to remove a broken tailgate molding clip and compare its head, shaft length, and mounting fit with the replacement before installing the rest. Keep the panel supported while positioning the clip, then press the pin only when the body of the retainer is seated. That helps make the locking action part of the installation rather than a way to pull a mismatched clip into place.

Ten en cuenta que the stated 7 mm hole size and dimensions may not cover every trim location across the listed trucks, confirm the specific application before ordering. The black plastic construction is intended for automotive trim tasks, but the supplied details do not specify a temperature range or a service-life rating. It makes sense if you need several replacement retainers for a compatible trim repair and can match the dimensions. Not the best choice if you need a clip with a different size or cannot verify the fit against your vehicle and panel.

Before you decide

How many clips are included? The product name specifies a 30-piece set.

What mounting hole size is listed? Each retainer is designed for a 7 mm mounting hole, the head is 16 mm in diameter, and overall length is 21 mm.

What parts are these intended to secure? The stated uses include tailgate molding, interior door panels, and other compatible automotive trim components.

Final verdict

This set is worth considering for routine trim replacement when the original fastener is missing or damaged and its size and application match the listed details. Its push-in expansion design gives the repair a simple installation approach, and 30 pieces provide spares for more than a single missing clip. On the spec sheet, the Ford F-150 through F-450 compatibility is broad, but exact fit still depends on the vehicle and trim position. Choose these retainers when the dimensions line up, choose a verified, application-specific fastener instead if the old clip or mounting hole differs.